From lee@hsh.com Sun Apr 24 15:54:04 PDT 1994 Article: 2376 of vmsnet.pdp-11 Path: nntp-server.caltech.edu!netline-fddi.jpl.nasa.gov!elroy.jpl.nasa.gov!sdd.hp.com!cs.utexas.edu!uunet!spcvxb!hsh!lee Newsgroups: vmsnet.pdp-11,alt.sys.pdp11 Subject: Re: DHQ11 switch settings ? Message-ID: <1994Apr24.174926.4001@hsh> From: lee@hsh.com (Lee Havemann) Date: 24 Apr 94 17:49:26 EDT References: <2p58d2$8jg@usenet.rpi.edu> <21APR199411434182@almach.caltech.edu> <2p8hip$5b1@email.tuwien.ac.at> Distribution: world Organization: HSH Associates Lines: 37 Xref: nntp-server.caltech.edu vmsnet.pdp-11:2376 alt.sys.pdp11:134 In article <2p8hip$5b1@email.tuwien.ac.at>, wsteinma@email.tuwien.ac.at (Werner Steinmann) writes: > Sorry to say, but I can't find a description for this board. > DHV11 looks rather similar (and I have a manual for that one). > CSR and interrupt settings would be fine. > > Thank you, > Werner Steinmann I am almost positive that the DHQ11 is the same as the CXY08/M3119 board - the difference being that the CXY is one of the S handle boards. Anyway this is the settings: CSR switchpack E36 Address bits A12 A11 A10 A9 A8 A7 A6 A5 A4 E36 switches 2 3 4 5 6 7 8 9 10 CSR Address 0 0 0 0 1 0 0 1 0 (Address 17760440) (1=closed 0=open) Vector: Switch pack E28 Vector Bits V8 V7 V6 V5 V4 V3 E28 Switches 3 4 5 6 7 8 Vector address 0 1 1 0 0 0 (Vector 300) (1=closed 0=open) Switch E36-1 selects either DHV11 or DHU11 mode. DHU11 mode = 1 (closed) E28-1 set to 1 E28-2 set to 0 -- Lee Havemann, Comp Ops Dir. HSH Associates (201) 838-3330 Internet: lee@hsh.com Compuserve: 70410,3507 AOL: HSH Assoc "Any opinions expressed are not necessarily those of anyone else, including myself."