VEDIT PLUS 2.03/2.33 for CP/M-86
		--------------------------------

This is a very old version of VEDIT PLUS for CP/M-86. It dates back to
1987. Obviously, we cannot support it. It is made freely available on
an "As-is" basis.

Although the original WHATS.NEW and ERRATA.DOC files are included, they
are of very limited use now.

Both an IBM-PC and a CRT terminal version are supplied.


To install the IBM-PC version
-----------------------------

1. Copy all files to your work disk. The main program file VPLUS.CMD can
   be renamed to VEDIT.CMD if desired.

2. The VPLUS.CMD file is preconfigured for the IBM-PC and does not
   need to be installed. It is ready to run.

3. If desired, you can configure VEDIT by running the INSTALL.CMD file
   with the following command:

        INSTALL VPLUS.CMD


To install the CRT version
--------------------------

1. Copy all files to your work disk.

2. Give the following command to start the configuration:

   	INSTALL VPLUS86C.SET VPLUS.CMD

   This will create the file VPLUS.CMD.

3. In the INSTALL (configuration) program's menu, be sure to
   select task 12 to select your particular CRT terminal type.


On-line Help
------------

Unfortunately, the extensive manuals originally supplied with
VEDIT PLUS for CP/M-86 are not available as text file or .PDF
files. Therefore, use the extensive on-line help.