3-Jun-91 13:23:31-MDT,10181;000000000000 Return-Path: Date: Mon, 3 Jun 91 13:17:32 MDT From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V91 #99 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <910603131736.V91N99@WSMR-SIMTEL20.ARMY.MIL> INFO-CPM Digest Mon, 3 Jun 91 Volume 91 : Issue 99 Today's Topics: CL10.LBR - LBR-file 'compacting' utility Conversion form CP/M to DOS Re: CP/M disk formats (was Re: CPM to DOS exchanger) (4 msgs) Re: Scott Adams adventures wanted Where: EXL ---------------------------------------------------------------------- Date: Fri, 31 May 91 12:17:20 EDT From: Mike Freeman Subject: CL10.LBR - LBR-file 'compacting' utility Summary: Reposted by Keith Petersen Message-ID: I have uploaded the following file to SIMTEL20: pd2: CL10.LBR LBR-file 'compacting' utility CL is a highly enhanced version of a utility created by Michal Carson in early 1989. Its main function is to "compact" an LBR file, that is, to eliminate the "dead space" caused by member files marked as "deleted." CL performs this task without the disk space appetite of LU's "-R" or NULU's "-K," and is itself only 4K in length. It can also erase members from the LBR, lists and wildcards allowed. For CP/M 2.2, with runtime ZCPR3 support. Mike Freeman freeman@watsun.cc.columbia.edu ------------------------------ Date: Sun, 2 Jun 91 14:56:36 -0400 From: SonicDruid@sctnve.sct.peachnet.edu Subject: Conversion form CP/M to DOS Message-ID: <5B06020E2B280175-SCTNVE*SonicDruid@sctnve.sct.peachnet.edu> Yes, it is possible to run DOS on your machine since you have a 8086 processor (CP/M 86), so your machine would be similar to the Z-100 which runs both CP/M 86 and DOS, but the only problem is that with the 8086 processor as opposed to the 8088 the machine isn't totally 100% IBM compatible, but it runs some version of DOS written for the machine, but reading other DOS disks (IBM, etc.) is not a problem. Something like DOS 1.0 - 2.0 might boot off your machine right off, but no guarantees.... ( The Z-100's ran those versions when I used to use them....and I went back and forth between DOS and CP/M with the Rdcpm command, and maybe some other command for reading DOS disks.... ..................................................................... :<< SonicDruid@sctnve.bitnet >> ============================ : : \\ Cyber Lab Consultant // : : Etop Udoh ->> A2 <<- \\ & Tutor & // : : \\ Computer Operator // : : //!\\ \\\\\\\\ ==================== : : // \\ !! Computer & Network Support : : //!!!!!\\ //////// Southern College of Technology : : // \\ !! Marietta, Georgia 30060 : : // \\ \\\\\\\\ : :...................................................................: ------------------------------ Date: 30 May 91 11:46:22 GMT From: astroatc!nicmad!madnix!ruth!rat@speedy.wisc.edu (David Douthitt) Subject: Re: CP/M disk formats (was Re: CPM to DOS exchanger) Message-ID: a.guillaume@trl.oz.au (Andrew Guillaume) writes: > On a related subject, I thought I might ask a similar question. I have an > Apple //c, with an Applied Engineering card which gives me CP/M capability. [snip] > Anyway, I was interested in finding out whether there existed a program that > would enable me to read any cp/m disk format from any other machine. Eg, I > would love to be able to read stuff written on a disk formatted on a Kaypro, > or an Osborne, and have the inverse possible, like giving a Kaypro owner one > of my diskettes formatted on the Apple. Unfortunately, the Apple II diskette goes beyond mere data incompatibility and is physically incompatible with the IBM diskette. To read an Apple diskette in an IBM PC (or vice versa) an adapter is required. For the IBM PC, several Apple II emulator boards exist, including the Trackstar board, which will support Apple II diskettes. Imagine watching your IBM boot off of an Apple II DOS 3.3 Master! (I seen it, I did!) For the Apple II, Applied Engineering makes a IBM PC emulator board which will support the IBM PC disk format in an external drive. I've not tried this product, but I hear good things. In addition, there is a product called MatchPoint-PC, which will read PC diskettes in your Apple drive. But it's not an emulator. Sorry couldn't be of more help.. ------------------------------ Date: 1 Jun 91 07:58:16 GMT From: cis.ohio-state.edu!zaphod.mps.ohio-state.edu!caen!spool.mu.edu!munnari.oz.au!yoyo.aarnet.edu.au!sirius.ucs.adelaide.edu.au!spam!dcook@ucbvax.Berkeley.EDU (David Cook) Subject: Re: CP/M disk formats (was Re: CPM to DOS exchanger) Message-ID: <822@spam.ua.oz> While on the subject of disk formats, are there any programs that will read Microbee 3.5" CP/M disks. As far as I am aware, the Microbee (an Australian designed and built CP/M machine, which also had some graphics support, until the company went broke :-( ) is the only CP/M machine that uses 3.5" disks, which hold 390K. While I'm asking, I'll be really optimistic, and ask if there are programs for the Microbee which will read IBM 3.5" disks (somehow I _really_ doubt it :) Thanks in advance, David T Cook | e-mail: dcook@spam.adelaide.edu.au | Phone: +61 8 228 5709 Assistant Computer Manager, Stats, Pure and Applied Maths LMG, Adelaide Uni "The wonderful thing about USENET is that anyone can express their opinion." "The worrying thing is that they _do_." ------------------------------ Date: 1 Jun 91 14:02:00 GMT From: mentor.cc.purdue.edu!gauss.math.purdue.edu!wilker@purdue.edu (Clarence Wilkerson) Subject: Re: CP/M disk formats (was Re: CPM to DOS exchanger) Message-ID: <13075@mentor.cc.purdue.edu> If the 3.5" disk is physically compatible with ibm pc type drives, then you can hack a set of parameter tables to match them and use 22disk, a shareware program that runs on a PC. My guess would be that the disks are single sided, double density with either 5 1k sectors per track or 10 512btye sectors per track, with first 2 tracks reserved for system. My second guess would be double sided SINGLE DENSITY, which the usual pc controller will not read. The 22disk instructions do have a hardware patch to read single density, however. If this is not urgent, and you don't have the experience to use 22disk, you can send me a sample disk with a few files on it (Non-critical stuff only, please) to me at Prof. Clarence Wilkerson Dept. Math. Purdue University West Lafayette, INdiana 47907 and I can probably figure it out. One gotcha is if the drive is actually 3" and not 3.5". Clarence Wilkerson ------------------------------ Date: 3 Jun 91 18:10:46 GMT From: orca!javelin.sim.es.com!imp!kpopple@uunet.uu.net (Ken Poppleton) Subject: Re: CP/M disk formats (was Re: CPM to DOS exchanger) Message-ID: <1991Jun3.181046.13407@javelin.sim.es.com> In article , rat@ruth.UUCP (David Douthitt) writes: > > Unfortunately, the Apple II diskette goes beyond mere data > incompatibility and is physically incompatible with the IBM diskette. > To read an Apple diskette in an IBM PC (or vice versa) an adapter is > required. > > For the Apple II, Applied Engineering makes a IBM PC emulator board > which will support the IBM PC disk format in an external drive. I've > not tried this product, but I hear good things. In addition, there is > a product called MatchPoint-PC, which will read PC diskettes in your > Apple drive. But it's not an emulator. > In addition there is the FDC-10 disk controller card for the Apple II. It allows the connection of up to 4 IBM-PC disk drives, either 5.25" or 3.5". The drive can read an write MSDOS disks, but as of yet there is not a utility to perform this task. Disks can also be formated for use with ProDos (not to be confused with compatability with an Apple disk drive formatted disk). For information contact Conversion Technology (CTI) in the care of Patrick L. McLaughlin 516 12th Ave Salt Lake City, Utah 84103 801/364-4171 The current price is about $80 for the card and drives are in the $70 to $100 range. Ken Poppleton ------------------------------ Date: 31 May 91 11:28:26 GMT From: nuchat!farwest!Uucp@uunet.uu.net (MARC NEWMAN) Subject: Re: Scott Adams adventures wanted Message-ID: <675695171.0@farwest.FidoNet> >I am trying to locate a copy of the *old* Scott Adams adventure games. I >know that a disk with 11 games was sold about 6 or 7 years ago for MS-DOS >and CP/M. Since I have the ability to run all sorts of software, either >will work. Does anyone out in net.land have an old copy they would be willing >to part with? If you find a copy, please let me know. I am also quite interested in getting a copy of the CP/M version. Marc * Origin: The Black Box RCP/M MSBBS, 713-480-2686 HST/V32/V42bis (106/601) ------------------------------ Date: Sat, 1 Jun 91 14:33:58 EDT From: Steve_Graham@ub.cc.umich.edu Subject: Where: EXL Message-ID: <8985024@ub.cc.umich.edu> I tried getting the new qterm, as it looks like it will be much handier than the kludgey arrangements I am using now, but cannot find EXL.COM to unpack it. There's an overwhelming amount of stuff on the simtel archives. Can anyone point me in the right direction? Which directory? Thanks Steve Graham ------------------------------ End of INFO-CPM Digest V91 Issue #99 ************************************ 6-Jun-91 09:22:35-MDT,10784;000000000000 Return-Path: Date: Thu, 6 Jun 91 09:16:07 MDT From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V91 #100 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <910606091608.V91N100@WSMR-SIMTEL20.ARMY.MIL> INFO-CPM Digest Thu, 6 Jun 91 Volume 91 : Issue 100 Today's Topics: decompressing *.?Y* files Kaypro 10 turborom available Need HELP PL/I compiler Qterm Re: Kaypro 10 turborom available Re: PL/I compiler (3 msgs) Re: Scott Adams adventures wanted ---------------------------------------------------------------------- Date: 6 Jun 91 12:52:55 GMT From: mcsun!unido!gmdzi!wittig@uunet.uu.net (Georg Wittig) Subject: decompressing *.?Y* files Message-ID: <4864@gmdzi.gmd.de> Where can I get the C source of a program that decompresses ``*.?Y*'' files? On SIMTEL20 I couldn't find such a source file neither in nor in . Note, I'm not looking for a ``*.COM'' file that does it, but for a C or Assembler source file. Any hints? Thanks in advance, -- Georg Wittig GMD-Z1.IT P.O.Box 1240 | "Freedom's just another word D-W-5205 St. Augustin 1 (Germany) | for nothing left to lose" email: wittig@gmdzi.gmd.de | (from "Me and Bobby McGee", telephone: (+49) 2241 14-2294 | Janis Joplin, Kris Kristofferson) ------------------------------ Date: Tue, 4 Jun 91 9:09:07 CDT From: Ric Lewallen Subject: Kaypro 10 turborom available Message-ID: I have a Kaypro turborom, disk and instruction book that I purchased for a Kaypro 10 that I had at work. When I gave up the machine, I took the turborom out of it. I hate throwing things like that away and would be willing to give it to the first person who sends me an address. Ric Lewallen AF DDN Program Manager lewallen@server.af.mil ------------------------------ Date: 4 Jun 91 23:58:49 GMT From: csustan!carlos@lll-winken.llnl.gov (Carlos Salgado) Subject: Need HELP Message-ID: <1991Jun4.235849.17343@csustan.csustan.edu> I have a Micro Designs system(Morrow) rev 1.0 I believe. However, I have no CPM 2.2 disk to get it booted with does anyone have any Ideas I also have the manuals to other software and CPM so this is all I need to get started. ------------------------------ Date: 4 Jun 91 07:39:24 GMT From: weyrich!orville@uunet.uu.net (Orville R. Weyrich) Subject: PL/I compiler Message-ID: <1991Jun4.073924.2610@weyrich.UUCP> Hi! This seems to be my week for needing strange and exotic things. I need to obtain a PL/I compiler (close to full implementation) for any of the three computers which I have: Microport Unix System V/386 MS-DOS CP/M (just about any soft-sector 5 1/4" format will do). I would be grateful for any recommendations as to where I can find such an animal. Also, if you have one you don't need, how about letting me have it cheap? Thanks, Orville. -------------------------------------- ****************************** Orville R. Weyrich, Jr., Ph.D. Certified Systems Professional Internet: orville%weyrich@uunet.uu.net Weyrich Computer Consulting Voice: (602) 391-0821 POB 5782, Scottsdale, AZ 85261 Fax: (602) 391-0023 (Yes! I'm available) -------------------------------------- ****************************** ------------------------------ Date: Wed, 5 Jun 91 14:06:56 EDT From: Steve_Graham@ub.cc.umich.edu Subject: Qterm Message-ID: <9020878@ub.cc.umich.edu> I downloaded this package because I really want a decent vt-100 emulator for my Kaypro II, and several other features are also attractive. However I haven't gotten into CP/M very deeply, haven't used DDT, and have no idea how to set up the correct patches needed to make QTERM run on my machine. And I don't think I should spend the time learning all about that just now. Any suggestions on how to get a working version going? Thanks --Steve Graham ------------------------------ Date: Thu, 6 Jun 91 09:19:00 CST From: lewallen@ddnuvax.af.mil (lewallen) Subject: Re: Kaypro 10 turborom available Message-ID: <9106061423.AA01330@ddnuvax.af.mil> John Luce, You are the winner. It will be in the mail today. I could not get back to you via the addresses you mentioned. Thanks to the other 10 people who replied. Ric Lewallen AF DDN Program Manager --------------------- Forwarded Message Body --------------------- Date: 6-5-91 10:59am From: {aurs01!aurw03!luce@mcnc.org}:ddn:hqssc To: lewallen:afddnpmo:hqssc Subj: Re: Kaypro 10 turborom available Resent: From <@server.af.mil:aurs01!aurw03!luce@mcnc.org> Wed Jun 5 12:15:44 1991 Resent: Received: from mcnc.mcnc.org by server.af.mil (5.59/25-eef) Resent: id AA21712; Wed, 5 Jun 91 10:30:33 CDT Resent: Received: by mcnc.mcnc.org (5.59/MCNC/3-21-91) Resent: id AA02432; Wed, 5 Jun 91 11:33:15 -0400 Resent: for lewallen@server.af.mil Resent: Received: from aurw03.local by aurs01.UUCP (4.0/SMI-4.0) Resent: id AA11729; Wed, 5 Jun 91 11:01:00 EDT Resent: Received: by aurw03.local (5.57/Ultrix3.0-C) Resent: id AA13262; Wed, 5 Jun 91 10:59:27 -0400 Resent: Date: Wed, 5 Jun 91 10:59:27 -0400 Resent: From: aurs01!aurw03!luce@mcnc.org (J. Luce) Resent: Message-Id: <9106051459.AA13262@aurw03.local> Resent: To: mcnc:uucp!aurs01!lewallen@server:af:mil@mcnc.org Resent: Subject: Re: Kaypro 10 turborom available Resent: Newsgroups: comp.os.cpm Resent: In-Reply-To: Resent: Organization: Alcatel Network Systems, Raleigh NC ---------------------------------------------------------------------- In article you write: -I have a Kaypro turborom, disk and instruction book that I purchased -for a Kaypro 10 that I had at work. When I gave up the machine, I took -the turborom out of it. I hate throwing things like that away and -would be willing to give it to the first person who sends me an -address. - -Ric Lewallen -AF DDN Program Manager -lewallen@server.af.mil Since mail gets here so slowly, I will assume I'm not first. BUT, if I am please send it to John Luce - 4205 Pleasant Valley Rd #266 - Raleigh, NC 27612 Thanks!!! -- ------------------------------------------------------------------- John Luce | Life is the leading cause of death Alcatel Network Systems | ----------------------------------------- Raleigh, NC | Standard Disclaimer Applies 919-850-6787 | Mail? Here? Try aurs01!aurw46!luce@mcnc.org | or ...!mcnc!aurgate!luce -------------------------------- or John.Luce@f130.n151.z1.fidonet.org ------------------------------ Date: 6 Jun 91 07:52:14 GMT From: math.fu-berlin.de!dww@uunet.uu.net (Debora Weber-Wulff) Subject: Re: PL/I compiler Message-ID: <60LR3ND@math.fu-berlin.de> orville@weyrich.UUCP (Orville R. Weyrich) writes: > >I need to obtain a PL/I compiler (close to full implementation) for any of > > Microport Unix System V/386 > MS-DOS > CP/M (just about any soft-sector 5 1/4" format will do). PL/I? On an MS-DOS or CP/M (!!!) platform with close to full implementation? Well, the beast compiler we used to use on our IBM 370 was a wee bit on the overweight side. I mean, when you stuff all the goodies from Algol, COBOL, FORTRAN and whatnot in one bag, it won't exactly be petite. But lots of luck, and let us know if you find anything! > -- Debora Weber-Wulff snail: FU Berlin, ZI Fachdidaktiken, Habelschwerdter Allee 45, W-1000 Berlin 33 email: weberwu@inf.fu-berlin.de, dww@math.fu-berlin.de ------------------------------ Date: 6 Jun 91 12:42:51 GMT From: virtech!cpcahil@uunet.uu.net (Conor P. Cahill) Subject: Re: PL/I compiler Message-ID: <1991Jun06.124251.241@virtech.uucp> dww@math.fu-berlin.de (Debora Weber-Wulff) writes: >PL/I? On an MS-DOS or CP/M (!!!) platform with close to full >implementation? Well, the beast compiler we used to use on our I had a PL/1 compiler for MS-DOS about 5 years ago. I'll look around my basement to see if I can come up with the manufacturer (I know it was distributed by IBM). -- Conor P. Cahill (703)430-9247 Virtual Technologies, Inc. uunet!virtech!cpcahil 46030 Manekin Plaza, Suite 160 Sterling, VA 22170 ------------------------------ Date: 6 Jun 91 14:47:34 GMT From: theory.TC.Cornell.EDU!shore@tcgould.tn.cornell.edu (Melinda Shore) Subject: Re: PL/I compiler Message-ID: <1991Jun6.144734.244@batcomputer.tn.cornell.edu> In article <60LR3ND@math.fu-berlin.de> dww@math.fu-berlin.de (Debora Weber-Wulff) writes: >PL/I? On an MS-DOS or CP/M (!!!) platform with close to full >implementation? Digital Research has (had?) a CP/M PL/I compiler, subset G. My dim recollection is that it was painfully slow and had about eleventy- five passes, but it may be what you're looking for. -- Software longa, hardware brevis Melinda Shore - Cornell Information Technologies - shore@theory.tn.cornell.edu ------------------------------ Date: 3 Jun 91 19:16:03 GMT From: zephyr.ens.tek.com!tektronix!percy!littlei!intelhf!jmaster@uunet.uu.net (Justin Masters) Subject: Re: Scott Adams adventures wanted Message-ID: <1991Jun3.191603.7539@intelhf.hf.intel.com> In article <675695171.0@farwest.FidoNet> MARC.NEWMAN@farwest.FidoNet.Org (MARC NEWMAN) writes: >>I am trying to locate a copy of the *old* Scott Adams adventure games. I >>know that a disk with 11 games was sold about 6 or 7 years ago for MS-DOS >>and CP/M. Since I have the ability to run all sorts of software, either >>will work. Does anyone out in net.land have an old copy they would be willing >>to part with? > >If you find a copy, please let me know. I am also quite interested in >getting a copy of the CP/M version. All I've got is a TRS-80 version of it. It's Z-80 code, but I'm sure it has dos calls for that system (NEWDOS80) and other calls from deep down in low memory. > >Marc > * Origin: The Black Box RCP/M MSBBS, 713-480-2686 HST/V32/V42bis (106/601) ------------------------------ End of INFO-CPM Digest V91 Issue #100 ************************************* 7-Jun-91 02:20:24-MDT,10735;000000000000 Return-Path: Date: Fri, 7 Jun 91 02:15:15 MDT From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V91 #101 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <910607021516.V91N101@WSMR-SIMTEL20.ARMY.MIL> INFO-CPM Digest Fri, 7 Jun 91 Volume 91 : Issue 101 Today's Topics: Cl.lbr works fine PD C compilers for CP/M ? PL/I compiler under CP/M. Re: CP/M disk formats (was Re: CPM to DOS exchanger) (2 msgs) Re: PL/I compiler (2 msgs) Thanks folks ---------------------------------------------------------------------- Date: 6 Jun 91 22:18:41 GMT From: cis.ohio-state.edu!magnus.acs.ohio-state.edu!ephillip%magnus.acs.ohio-state.edu@ucbvax.Berkeley.EDU (Earl W Phillips) Subject: Cl.lbr works fine Message-ID: I d/l'ed the cl10.lbr file from WSMR-Simtel20.army.mil the other night, and it runs fine on my xerox 820-II. Just thought you'd wanna know !! Thanx to the fellow who placed it there, I've been looking for just such a utility for a while, but since I've opened all my .lbr files now, I've limited use for it for a while. ***************************************************************** * | ====@==== ///////// * * ephillip@magnus.ircc.ohio-state.edu| ``________// * * | `------' * * -JR- | Space;........the final * * | frontier............... * ***************************************************************** ------------------------------ Date: 6 Jun 91 17:38:48 GMT From: munnari.oz.au!yoyo.aarnet.edu.au!sirius.ucs.adelaide.edu.au!spam!dcook@uunet.uu.net (David Cook) Subject: PD C compilers for CP/M ? Message-ID: <831@spam.ua.oz> Are there any Public Domain C compilers for CP/M ? I've had a quick look around simtel20, but didn't notice any. (note: by 'Public Domain', I would also like to know about companies that don't support their C compilers any more, who might have removed or loosened copyright restrictions ) (If there aren't any PD compilers around, which is the best _cheap_ C compiler around ... and does it come on *3.5"* CP/M 2.2 disks ? ) (yep, I bought myself one of the most orphaned orphan systems around :-) not only aren't they made any more, but I can't easily grab software from any other CP/M systems ... ) David T Cook | e-mail: dcook@spam.adelaide.edu.au | Phone: +61 8 228 5709 Assistant Computer Manager, Stats, Pure and Applied Maths LMG, Adelaide Uni "The wonderful thing about USENET is that anyone can express their opinion." "The worrying thing is that they _do_." ------------------------------ Date: Fri, 07 Jun 91 10:33:02 IST From: "Jacques J. Goldberg" Subject: PL/I compiler under CP/M. I have it. But: 1-I never used it, the disk is there, I only ran one test to see if it works, many years ago. 2-I do not have the slightest idea where I got it from, although it probably migrated from a defunct SuperBrain as we had many of these on campus. 3-I have absolutely no documentation. 4-My CP/M machine, a LOBO-MAX80, is temporarily dismantled because kids and grandchildren needed the room for a while. The backup I have is a DSDD 80 track diskette. I guess that this format is not very practical. Therefore: -How do we handle the copyright problem? -How **URGENT** is it? I can of course spend a few hours carrying the parts of my Lobo to office to make a 40 tracks copy or even better write in MSDOS format, but will do it only to meet a **REAL** need. If answering this mail, **PLEASE** note that my strange userid phr00jg contains two zeroes!! Jacques Goldberg DISCLAIMER: Prof of Physics, of course. Who else would keep such diskettes? ------------------------------ Date: 6 Jun 91 03:39:44 GMT From: att!fang!tarpit!bilver!bill@ucbvax.Berkeley.EDU (Bill Vermillion) Subject: Re: CP/M disk formats (was Re: CPM to DOS exchanger) Message-ID: <1991Jun6.033944.5255@bilver.uucp> In article <822@spam.ua.oz> dcook@spam.ua.oz (David Cook) writes: > While on the subject of disk formats, are there any programs >that will read Microbee 3.5" CP/M disks. As far as I am aware, the >Microbee (an Australian designed and built CP/M machine, which also >had some graphics support, until the company went broke :-( ) >is the only CP/M machine that uses 3.5" disks, which hold 390K. Well I know of at least 1 other CPM machine that used 3.5" disks. Sony. We used the Sony CPM machines as a front end for an interactive video disk system a zillion years ago. With the 64k RAM, Sony's Basic with Video Disk extensions, we had about 28k left for a program. Worked great. We "knocked their socks off" when we finally got it all running. -- Bill Vermillion - UUCP: ...!tarpit!bilver!bill : bill@bilver.UUCP ------------------------------ Date: 7 Jun 91 06:42:52 GMT From: uhccux!munnari.oz.au!bruce!monu0.cc.monash.edu.au!monu1.cc.monash.edu.au!rjl@ames.arc.nasa.gov ( r lang) Subject: Re: CP/M disk formats (was Re: CPM to DOS exchanger) Message-ID: <1991Jun7.064252.13117@monu1.cc.monash.edu.au> In article <822@spam.ua.oz>, dcook@spam.ua.oz (David Cook) writes: > > While on the subject of disk formats, are there any programs > that will read Microbee 3.5" CP/M disks. As far as I am aware, the > Microbee (an Australian designed and built CP/M machine, which also > had some graphics support, until the company went broke :-( ) > is the only CP/M machine that uses 3.5" disks, which hold 390K. Microbee still exists, but to my knowledge is not making CP/M machines. Microbee was bought out a few years ago by the Serafini (sp?) brothers who run MicroHelp in Brunswick, Victoria. > While I'm asking, I'll be really optimistic, and ask if there > are programs for the Microbee which will read IBM 3.5" disks > (somehow I _really_ doubt it :) Yes. FBN Software which wrote PC-Alien also wrote Bee-Alien which was sold by Microbee. I bought a copy of this and it mostly works (my version won't format IBM 5.25" 360k disks, but will read them correctly). There are some 3.5" MSDOS formats listed, but I haven't tried them. I have also written my own program to read and write IBM disks - this will handle 5.25" 360k and 3.5" 720k. It is known to work on a 54k, 128k and 256k Microbee. Since CP/M has an ambiguous file end, copying to CP/M and back to IBM will usually give you some trailing garbage on a file (after a ^Z). If you send me a 3.5" disk with return postage, I will put on it a copy of Kermit-80 4.11 for the Microbee. Clarence Wilkerson writes: > If the 3.5" disk is physically compatible with ibm pc type > drives, then you can hack a set of parameter tables to match > them and use 22disk, a shareware program that runs on a PC. I have tried this and it didn't work. I have two theories, neither has been tested. 1. Microbee disks have 10 sectors and the intersector space is shorter than specified in the Western Digital data sheet. The PC may not like this short space. 2. I think (but am not sure) that the sector header information is marked side 0 for both sides of the disk. If the PC insists that side 1 is marked as side 1 ... > My guess would be that the disks are single sided, double > density with either 5 1k sectors per track or 10 512btye > sectors per track, with first 2 tracks reserved for system. 3.5", 10 512byte sectors per track, single sided, 390k 3.5", 10 512byte sectors per track, double sided, 780k In both formats tracks 0 and 1 (both sides) are reserved for system. I have the correct DPB entries and skew table if anyone wants them. -- Russell Lang Email: rjl@monu1.cc.monash.edu.au Phone: (03) 565 3460 Department of Electrical and Computer Systems Engineering Monash University, Australia ------------------------------ Date: 6 Jun 91 14:02:55 GMT From: csn!cherokee!skipy!tpoind@handies.ucar.edu (Tom Poindexter) Subject: Re: PL/I compiler Message-ID: <1991Jun6.140255.5798@cherokee.uswest.com> In article <1991Jun06.124251.241@virtech.uucp> cpcahil@virtech.uucp (Conor P. Cahill) writes: >dww@math.fu-berlin.de (Debora Weber-Wulff) writes: >>PL/I? On an MS-DOS or CP/M (!!!) platform with close to full >>implementation? Well, the beast compiler we used to use on our comment: remember that long ago, in a place far away, Fortran & Cobol were compiled on cpus with 4096 words of memory (not kilobytes or megabytes, just 4,096). > >I had a PL/1 compiler for MS-DOS about 5 years ago. I'll look around >my basement to see if I can come up with the manufacturer (I know it >was distributed by IBM). > It was distributed by Digital Research. The compiler first came out for 8080 in CP/M, then migrated to 8086 & MS-DOS. It was *quite* buggy; I don't think DR ever released any version beyond 1.0. The compiler supposedly supported PL/I ANSI Subset G. There is some sort of PL/I language *interpreter* on Simtel20. Look for RUNPLI or some such. -- Tom Poindexter tpoind@uswest.com ..!uunet!boulder!uswat!tpoind /usr/bin/postnews: $HOME/.signature rejected, poor taste ------------------------------ Date: 6 Jun 91 15:20:23 GMT From: agate!spool.mu.edu!mips!zaphod.mps.ohio-state.edu!caen!hellgate.utah.edu!fcom.cc.utah.edu!cc.usu.edu!slsw2@ucbvax.Berkeley.EDU Subject: Re: PL/I compiler Message-ID: <1991Jun6.092023.48021@cc.usu.edu> Digital Research made a PL/I compiler for CP/M. Don't know how full-featured it was (I've never used it, and never used another PL/I compiler that I could compare it to), but one of the guys here swears by it. Don't know where you'd find a copy in this day and age, though. Roger Ivie slsw2@cc.usu.edu ------------------------------ Date: Fri, 7 Jun 91 00:55:34 EDT From: Steve_Graham@ub.cc.umich.edu Subject: Thanks folks Message-ID: <9038008@ub.cc.umich.edu> I haven't yet had time to take everyone's advice, and so get QTERM up and running on my machine, but so many people have been helpful I just wanted to say thanks to you all. --Steve Graham ------------------------------ End of INFO-CPM Digest V91 Issue #101 ************************************* 7-Jun-91 15:20:29-MDT,8509;000000000000 Return-Path: Date: Fri, 7 Jun 91 15:15:11 MDT From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V91 #102 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <910607151512.V91N102@WSMR-SIMTEL20.ARMY.MIL> INFO-CPM Digest Fri, 7 Jun 91 Volume 91 : Issue 102 Today's Topics: Osborne I format problem Re: CP/M disk formats (was Re: CPM to DOS exchanger) Re: PL/I compiler (2 msgs) Re: Qterm Re: Scott Adams adventures wanted (personal for Justin Masters) Reply to PL/1 and disk conversions ---------------------------------------------------------------------- Date: 7 Jun 91 20:24:11 GMT From: widener!netnews.upenn.edu!poly2.cis.upenn.edu!mcclenne@g.ms.uky.edu (nennelccM nodroG) Subject: Osborne I format problem Message-ID: <44318@netnews.upenn.edu> I have an Osborne I which recently managed to get running again, but after booting the system disk (and all the others I have) I discovered that I have no format program, (the copy program is missing), nor do I have enough information about the system to write my own format program. Is there any Osborne I owner out there that would be willing to help? I do have download capabilities, but the computer is pretty much useless as it is -- most the disks I have for it are full. Thanks for any help in advance. --------------- Gordon McClennen University of Pennsylvania ------------------------------ Date: 7 Jun 91 14:02:23 GMT From: cis.ohio-state.edu!zaphod.mps.ohio-state.edu!hobbes.physics.uiowa.edu!iowasp.physics.uiowa.edu!syswtr@ucbvax.Berkeley.EDU Subject: Re: CP/M disk formats (was Re: CPM to DOS exchanger) Message-ID: <1991Jun7.090223.847@iowasp.physics.uiowa.edu> In article <1991Jun7.064252.13117@monu1.cc.monash.edu.au>, rjl@monu1.cc.monash.edu.au ( r lang) writes: > In article <822@spam.ua.oz>, dcook@spam.ua.oz (David Cook) writes: > Clarence Wilkerson writes: >> If the 3.5" disk is physically compatible with ibm pc type >> drives, then you can hack a set of parameter tables to match >> them and use 22disk, a shareware program that runs on a PC. > I have tried this and it didn't work. > I have two theories, neither has been tested. > 1. Microbee disks have 10 sectors and the intersector space > is shorter than specified in the Western Digital data sheet. > The PC may not like this short space. > 2. I think (but am not sure) that the sector header information > is marked side 0 for both sides of the disk. > If the PC insists that side 1 is marked as side 1 ... On item 2: The SMC floppy controller on the SB180 (a '765 look-alike) is capable of reading diskettes that have the side bit in the sector header wrong. I don't know if the NEC or Intel chip acts the same, but if so the following may help: Write command: Command Unit/Head (controls hardware lines) Cyl Head (controls what is to/from disk) Record Size EOT GPL DTL On the FDC9266 setting the 'Unit/Head' bit to side one and the 'Head' byte to side zero does work. Willy ------------------------------ Date: 7 Jun 91 12:09:42 GMT From: world!jamesp@decwrl.dec.com (james M peterson) Subject: Re: PL/I compiler Message-ID: <1991Jun7.120942.3626@world.std.com> As I remember the digital research pl/1 compiler was not real compatable with our vax pl/1 stuff - as in major recoding. ------------------------------ Date: 7 Jun 91 15:27:25 GMT From: cis.ohio-state.edu!zaphod.mps.ohio-state.edu!swrinde!elroy.jpl.nasa.gov!news.larc.nasa.gov!grissom.larc.nasa.gov!kludge@ucbvax.Berkeley.EDU ( Scott Dorsey) Subject: Re: PL/I compiler Message-ID: <1991Jun7.152725.819@news.larc.nasa.gov> In article <1991Jun7.120942.3626@world.std.com> jamesp@world.std.com (james M peterson) writes: >As I remember the digital research pl/1 compiler was not real compatable >with our vax pl/1 stuff - as in major recoding. The DR PL/I was a PL/I subset G compiler, whereas the VMS PL/I is a full implementation. PL/I was the Ada of the 1960's; enormous with every programmer using a different subset. The DR compiler was still being sold as late as 1983. I have a manual for it somewhere, though I don't have the software. --scott ------------------------------ Date: 7 Jun 91 10:25:27 GMT From: cis.ohio-state.edu!zaphod.mps.ohio-state.edu!mips!spool.mu.edu!munnari.oz.au!yoyo.aarnet.edu.au!sirius.ucs.adelaide.edu.au!spam!dcook@ucbvax.Berkeley.EDU (David Cook) Subject: Re: Qterm Message-ID: <832@spam.ua.oz> In article <9020878@ub.cc.umich.edu> Steve_Graham@UB.CC.UMICH.EDU writes: >I downloaded this package because I really want a decent vt-100 emulator for my >Kaypro II, and several other features are also attractive. However I haven't >gotten into CP/M very deeply, haven't used DDT, and have no idea how to set >up the correct patches needed to make QTERM run on my machine. And I don't >think I should spend the time learning all about that just now. Any suggestions >on how to get a working version going? > >Thanks > >--Steve Graham I also downloaded qterm recently, but due to a total lack of technical information for my computer (yes, it's a Microbee :), I have very little idea what needs to be done to patch qterm appropriately. If someone else has done the hard work for me, I would love a working copy (note: it's a Microbee CIAB, 64k). (I have ZSID and DDT, if you only have the patches). Thanks in advance, Yet another Microbee owner, (btw: how many Microbee owners read this group ? just curious ... ) David T Cook | e-mail: dcook@spam.adelaide.edu.au | Phone: +61 8 228 5709 Assistant Computer Manager, Stats, Pure and Applied Maths LMG, Adelaide Uni "The wonderful thing about USENET is that anyone can express their opinion." "The worrying thing is that they _do_." ------------------------------ Date: 7 Jun 91 13:39:39 GMT From: giza.cis.ohio-state.edu!erd@tut.cis.ohio-state.edu (Ethan R Dicks) Subject: Re: Scott Adams adventures wanted (personal for Justin Masters) Message-ID: <131530@tut.cis.ohio-state.edu> In article <1991Jun3.191603.7539@intelhf.hf.intel.com> jmaster@intelhf.hf.intel.com (Justin Masters) writes: >>>I am trying to locate a copy of the *old* Scott Adams adventure games. > >All I've got is a TRS-80 version of it. It's Z-80 code, but I'm sure it has >dos calls for that system (NEWDOS80) and other calls from deep down in >low memory. > Justin, I would like to hear more about what you have, but your machine (intelhf) says that you don't exist. Please contact me via e-mail. Thanks and apologies for the wasted bandwidth -ethan -- Ethan R. Dicks | ###### This signifies that the poster is a member in Software Results Corp| ## good sitting of Inertia House: Bodies at rest. 940 Freeway Drive N. | ## Columbus OH 43229 | ###### "You get it, you're closer." ------------------------------ Date: Fri, 7 Jun 91 11:29:57 -0400 From: SonicDruid@sctnve.sct.peachnet.edu Subject: Reply to PL/1 and disk conversions Message-ID: <5B06070B18130120-SCTNVE*SonicDruid@sctnve.sct.peachnet.edu> hi, Please email me since I sent you email concerning converting disk formats and don't know if you got it, since I receive no notification that it bounced..... Also I have a PL/1 compiler for CP/M..... ..................................................................... :<< SonicDruid@sctnve.bitnet >> ============================ : : \\ Cyber Lab Consultant // : : Etop Udoh ->> A2 <<- \\ & Tutor & // : : \\ Computer Operator // : : //!\\ \\\\\\\\ ==================== : : // \\ !! Computer & Network Support : : //!!!!!\\ //////// Southern College of Technology : : // \\ !! Marietta, Georgia 30060 : : // \\ \\\\\\\\ : :...................................................................: ------------------------------ End of INFO-CPM Digest V91 Issue #102 ************************************* 9-Jun-91 12:22:23-MDT,8668;000000000000 Return-Path: Date: Sun, 9 Jun 91 12:15:09 MDT From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V91 #103 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <910609121510.V91N103@WSMR-SIMTEL20.ARMY.MIL> INFO-CPM Digest Sun, 9 Jun 91 Volume 91 : Issue 103 Today's Topics: Directory reorganization at SIMTEL20 Kermit-80 V4.11 files uploaded to SIMTEL20 MIX C, XLISP Availability Re: PL/I compiler (3 msgs) Re: Scott Adams adventures wanted Televideo TS-1603 ---------------------------------------------------------------------- Date: Fri, 7 Jun 1991 23:52 MDT From: Keith Petersen Subject: Directory reorganization at SIMTEL20 Message-ID: Effective immediately, SIMTEL20 directories PD1: and PD1: have been moved to PD8:. This is part of a directory reoganization to make use of several new disk drives which were recently installed. Additional changes will be announced later as they occur. Keith -- Keith Petersen Maintainer of the MSDOS, MISC and CP/M archives at SIMTEL20 [192.88.110.20] Internet: w8sdz@WSMR-SIMTEL20.Army.Mil or w8sdz@vela.acs.oakland.edu Uucp: uunet!wsmr-simtel20.army.mil!w8sdz BITNET: w8sdz@OAKLAND ------------------------------ Date: Mon, 3 Jun 91 15:54:41 EDT From: Mike Freeman Subject: Kermit-80 V4.11 files uploaded to SIMTEL20 Summary: Reposted by Keith Petersen Message-ID: I have uploaded to SIMTEL20: pd2: CP411HEX.ARK Kermit-80 V4.11 hex files for CP/M systems CP411SRC.ARK Kermit-80 V4.11 source files The files in CP411HEX.ARK may be MLOADed together to give running versions of Kermit-80 for various CP/M systems (see the file CPAAAA.HLP for details). The sources in CP411SRC.ARK may be used to recompile Kermit-80 and/or add support for new systems. This is, of course, CP/M Kermit from Columbia University. New in this version are advanced Server functions and SET COLLISION, among others (see CPK411.ANN for details). -- Mike K7UIJ -- Mike Freeman ------------------------------ Date: 8 Jun 91 18:14:09 GMT From: cis.ohio-state.edu!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!bronze!silver!bwildasi@ucbvax.Berkeley.EDU (Ben Wildasin) Subject: MIX C, XLISP Availability Message-ID: <1991Jun8.181409.11230@bronze.ucs.indiana.edu> Is MIX C still available? Can it be gotten via mail-order or does it have to be bought from the manufacturer? Any information about where to get it or comments about the compiler are welcome. Also, does anyone have an executable copy of XLISP? (Will MIX C compile XLISP?) Here also, any info is appreciated. -- Ben Wildasin Internet: bwildasi@silver.ucs.indiana.edu ========================================================================== "If I may begin at the beginning. First there is the cherry fondue. Now this is extremely nasty, but we can't prosecute you for that." ------------------------------ Date: 7 Jun 91 23:45:48 GMT From: cis.ohio-state.edu!zaphod.mps.ohio-state.edu!swrinde!elroy.jpl.nasa.gov!jato!vsnyder@ucbvax.Berkeley.EDU (Van Snyder) Subject: Re: PL/I compiler Message-ID: <1991Jun7.234548.24412@jato.jpl.nasa.gov> I saw an ad in PC Week (or was it Byte?) some months ago for a PL\I compiler for '386s. It wasn't DR or MS or IBM. -- vsnyder@jato.Jpl.Nasa.Gov ames!elroy!jato!vsnyder vsnyder@jato.uucp ------------------------------ Date: 7 Jun 91 21:34:02 GMT From: mauxci!eci386!ecicrl!clewis@apple.com (Chris Lewis) Subject: Re: PL/I compiler Message-ID: <2120@ecicrl.ocunix.on.ca> In article <60LR3ND@math.fu-berlin.de> dww@math.fu-berlin.de (Debora Weber-Wulff) writes: >orville@weyrich.UUCP (Orville R. Weyrich) writes: >> >>I need to obtain a PL/I compiler (close to full implementation) for any of >> Microport Unix System V/386 >> MS-DOS >> CP/M (just about any soft-sector 5 1/4" format will do). >PL/I? On an MS-DOS or CP/M (!!!) platform with close to full >implementation? Well, the beast compiler we used to use on our >IBM 370 was a wee bit on the overweight side. I mean, when you >stuff all the goodies from Algol, COBOL, FORTRAN and whatnot >in one bag, it won't exactly be petite. But lots of luck, and let >us know if you find anything! Sure, such things were available. Digital Research Inc sold a PL/1G compiler for CP/M. "G" was supposed to be a relatively machine independent subset of fully bloated IBM PL/1. Supposedly a semi-international standard. PL/1 G was available on a lot of different platforms. Maybe DRI still has a few copies of it, perhaps for machines other than CP/M. Also, LPI (I think it was LPI, or maybe it was Greenhills) builds their compilers in PL/1, and since they have to port PL/1 first to each platform, there's likely to be a commercial version of their PL/1 for the platform you want. I pondered using PL/1G on my CP/M machine, then I discovered it didn't allow you to "*" array declarations in procedure argument declarations so I abandoned it. -- Chris Lewis, Phone: (613) 832-0541, Domain: clewis@ferret.ocunix.on.ca UUCP: ...!cunews!latour!ecicrl!clewis; Ferret Mailing List: ferret-request@eci386; Psroff (not Adobe Transcript) enquiries: psroff-request@eci386 or Canada 416-832-0541. Psroff 3.0 in c.s.u soon! ------------------------------ Date: 7 Jun 91 11:26:42 GMT From: nuchat!farwest!Uucp@uunet.uu.net (MARC NEWMAN) Subject: Re: PL/I compiler Message-ID: <676318706.0@farwest.FidoNet> >>I need to obtain a PL/I compiler (close to full implementation) for any of >> >>Microport Unix System V/386 >>MS-DOS >>CP/M (just about any soft-sector 5 1/4" format will do). >PL/I? On an MS-DOS or CP/M (!!!) platform with close to full >implementation? Well, the beast compiler we used to use on our >IBM 370 was a wee bit on the overweight side. I mean, when you >stuff all the goodies from Algol, COBOL, FORTRAN and whatnot >in one bag, it won't exactly be petite. But lots of luck, and let >us know if you find anything! Microsoft did have a CP/M version of PL/I. I have it laying around somewhere, sans docs, but I seem to remember it was a pretty good language. Marc * Origin: The Black Box RCP/M MSBBS, 713-480-2686 HST/V32/V42bis (106/601) ------------------------------ Date: 7 Jun 91 11:29:23 GMT From: nuchat!farwest!Uucp@uunet.uu.net (MARC NEWMAN) Subject: Re: Scott Adams adventures wanted Message-ID: <676318706.1@farwest.FidoNet> >>If you find a copy, please let me know. I am also quite interested in >>getting a copy of the CP/M version. >All I've got is a TRS-80 version of it. It's Z-80 code, but I'm sure it has d >os calls for that system (NEWDOS80) and other calls from deep down in low mem >ory. Thanks, I am not sure about NEWDOS80 but if it is not CP/M 80 compatable, it will not work for me. Marc * Origin: The Black Box RCP/M MSBBS, 713-480-2686 HST/V32/V42bis (106/601) ------------------------------ Date: 8 Jun 91 19:38:18 GMT From: wuarchive!rex!spool.mu.edu!mips!pacbell.com!pacbell!unet!.com@g.ms.uky.edu (Ken Smith) Subject: Televideo TS-1603 Message-ID: <1370@unet.UUCP> I have a Televideo model TS-1603 that I aquired a few years ago, and just recently have renewed interest in setting it up. It is a CPM machine with Two half height floppys, a 14" monitor and I think 128K ram ( It has been a while; I not possitive about the ram size). Anyways, Does anyone in netland know of this machine? Will this machine run some of the earlier DOS software? If not, is there some sort of conversion program to allow this? Where can I find a mouse and driver software for this unit. In general, Is this machine worth booting up and spending some money on. I am trying to expand my computational- horizons and figure that this machine should be capable of providing me with some hours of programming enjoyment. Any information would be useful and greatly appreciated!! Ken Smith < kens@net,com> ------------------------------ End of INFO-CPM Digest V91 Issue #103 ************************************* 9-Jun-91 21:01:29-MDT,18176;000000000000 Mail-From: W8SDZ created at 9-Jun-91 20:51:25 Return-Path: Date: Sun, 9 Jun 91 20:51:25 MDT From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V91 #104 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <910609205126.V91N104@WSMR-SIMTEL20.ARMY.MIL> INFO-CPM Digest Sun, 9 Jun 91 Volume 91 : Issue 104 Today's Topics: How to order SIMTEL20 files via e-mail SIMTEL20 archives info for Internet FTP users ---------------------------------------------------------------------- Date: Sun, 9 Jun 1991 20:46 MDT From: Keith Petersen Subject: How to order SIMTEL20 files via e-mail Message-ID: If you do not have FTP access to SIMTEL20, files may be ordered by e-mail from LISTSERV@VM1.NODAK.EDU or LISTSERV@VM.ECS.RPI.EDU. If you are on BITNET: LISTSERV@NDSUVM1 LISTSERV@RPIECS If your mailer knows domains: listserv@vm1.nodak.edu listserv@vm.ecs.rpi.edu If your mailer wants bang paths: uunet!vm1.nodak.edu!listserv uunet!vm.ecs.rpi.edu!listserv If you use bang paths, substitute your nearest neighbor which is also on the Internet for uunet in the examples above. Some examples are: ames, decvax, decwrl, harvard, hplabs, nosc, rutgers, sharkey, sun, ucbvax, ucsd, udel, uw-beaver, wuarchive. Send this command to the server to get its help file: GET PDGET HELP Sample command (which gets our catalog of MS-DOS files): /PDGET MAIL PD:SIMIBM.ARC UUENCODE These commands should be sent as the body of a regular email message. Do not include a signature because it confuses the server. If you have xxdecode, you may wish to specify XXENCODE instead of UUENCODE to avoid character translation problems. Comments, questions, and suggestions should be directed to the LISTSERV manager at one of these addresses, depending on which server you normally use: Internet BITNET "John Fisher" "Marty Hoag" DO NOT send your comment or question about the servers to SIMTEL20. However, if you wish to report a program bug or to request information on how to upload files to SIMTEL20, you may send e-mail to me at one of the addresses below. Keith -- Keith Petersen Maintainer of the MSDOS, MISC and CP/M archives at SIMTEL20 [192.88.110.20] Internet: w8sdz@WSMR-SIMTEL20.Army.Mil or w8sdz@vela.acs.oakland.edu Uucp: uunet!wsmr-simtel20.army.mil!w8sdz BITNET: w8sdz@OAKLAND ------------------------------ Date: Sun, 9 Jun 1991 20:40 MDT From: Keith Petersen Subject: SIMTEL20 archives info for Internet FTP users Message-ID: [File: SIMTEL20.INF Last revised: May 9, 1991] [Note: Due to disk space limitations the PC-Blue collection is temporarily off-line. We are sorry for the inconvenience to our users.] THE SIMTEL20 ARCHIVES OVERVIEW There is a colossal amount of free public domain and shareware software for the CP/M, PCDOS/MSDOS, Macintosh, and UNIX operating systems, and for the DoD standard programming language, Ada, in several archives on WSMR-SIMTEL20.ARMY.MIL (IP host 192.88.110.20), a DECSYSTEM-20 running the TOPS-20 operating system at White Sands Missile Range, New Mexico. Archives of correspondence for several mailing lists are also available. [SIMTEL20 is a contraction of SIMulation and TELeprocessing, the name of the branch that originally purchased the machine and in whose building the system still resides, and the "20" in DECSYSTEM-20. The convention of including the "20" in some form or another was popular with other DECSYSTEM-20 systems at the time SIMTEL20 was named, such as MIT-XX at MIT and SCORE at Stanford.] You can obtain these files using the InterNet file transfer protocol, FTP (described in a following paragraph), with user-name "anonymous". For a login password, use "guest", your host-name, or any other string of printing characters. Throughout this message, FTP examples are given in a GENERIC syntax. You will have to consult either local documentation or your friendly system wizard to learn the actual syntax used with your local mainframe operating system. For the sake of brevity, the full host name "WSMR-SIMTEL20.ARMY.MIL" will be dropped from further references to SIMTEL20 in this discussion. Also please note that square brackets may be used in place of angle brackets in referring to directory names. For example, pd1:[msdos.filedocs] is the same as pd1: There are many helpful files in the default ANONYMOUS ftp directory. Please look at these if you have need for further information on specific collections. To obtain directory listings, connect to SIMTEL20 via FTP and get these files: pd1:msdos.crclst pd1:pc-blue.crclst pd2:cpm.crclst pd2:cpmug.crclst pd2:sigm.crclst pd8:hz100.crclst pd5:macintosh.crclst pd8:misc.crclst pd6:unix-c.crclst pd2:ada.crc There is also a comma-delimited directory listing in each top-level directory, FILES.IDX, which is suitable for importing into a database program. This file may be of greater use than the crclst files because it can be compared against an earlier version of the same file to produce a complete list of files added and deleted from the archives. Using the comma-delimited fields it is possible to build a script for FTP to maintain a parallel archive. FILES.IDX can be printed or displayed with a simple BASIC program. For more information see PD1:AAAREAD.ME. The , , and archives are the ones to watch for the very latest offerings, as they are updated frequently. The , and archives contain software distributed by the CP/M Users Group, the SIG/M Users Group and the PC-Blue Users Group respectively. This software is available on diskettes from the associated user groups, and the archives are updated as new volumes are issued. The archive contains software for the IBM-PC and similar machines. The archives also contain software for the MSDOS and PCDOS operating systems; but these archives are locally managed, and therefore are updated more frequently than the archive. The archive contains a variety of UNIX tools. Those which apply specifically to CP/M are in the directory . The archive is growing rapidly. Information about this archive is in directory PD2:. In general, the archived software is very good, having been worked-over and refined by many users. The documentation and comments tend to be complete and informative. Files in all of these archives can be obtained using the FTP procedures described in this message. PLEASE NOTE: Due to the large number of files available, the archive maintainers cannot possibly attempt to validate the proper operation of the various programs. When a program bug is reported, immediate action is taken to either correct the error or remove the offending program from the archives. Still, users must understand that all archive programs are offered AS IS, and the archive maintainers specifically disclaim any liability should these programs malfunction or cause damage, incidental or otherwise. When testing ANY new software, be certain that all information stored on disk is backed-up before you start, so that you can recover if files are damaged or erased. This is particularly true if you have a hard disk, in which case malfunctions can be spectacularly disasterous. FILE TYPES Files are stored in two formats: Text files such as those with names that end with DOC, HEX, INF and ASM are sometimes stored as ASCII files, but sometimes these files are stored in binary compressed form. Binary storage is also used for executable (COM and EXE) and library/archive files (LBR and ARC). All binary data are stored as four 8-bit bytes per 36-bit SIMTEL20 word, with the low-order four bits of each word filled with zeros. If such a file is interpreted as a contiguous string, as will happen if a straight binary transfer is made to a 16 or 32-bit UNIX machine, the four zero filler-bits per 36-bit group will cause rather bizarre and frustrating results. For information on ARC, ARK, LZH, ZIP, ZOO, LBR, squeezed and crunched files, get PD2:00-FILES.DOC and/or PD1:00-FILES.DOC. Although the type of storage used for a particular file can usually be inferred from the file-name, this is not always true. It is a good idea to check the appropriate "crclst" of "idx" file to ascertain the storage format used for each file of interest. Now, and for the foreseeable future, storage formats for files in the , and archives can be determined from their "generation numbers", as shown by the FTP directory command. For example, the FTP command: dir pd1: will yield results of the form: -CATALOG.001.2 ABSTRACT.001.2 BW.ASM.2 BW.BAS.1 BW.EXE.1 COLOR.ASM.2 COLOR.BAS.1 COLOR.EXE.1 ...and so on All files with names ending in ".1" are stored in binary format, and those with names ending in ".2" are stored in ASCII. This relationship will continue to apply for files in the , and archives until further notice. WARNING: Because the public domain archives on SIMTEL20 consume a huge amount of disk space, storage capacity will be conserved by the greatest practical use of libraries, archives, crunched and squeezed files, all of which are stored in binary format. If you cannot properly transfer binary files, you are going to be VERY FRUSTRATED! If you need help, please contact your local system wizard and provide him/her with a copy of this message. Having done that, if you are still unable to make things work correctly, send a message to Action@WSMR-SIMTEL20.ARMY.MIL and someone will try to help you. Please provide the following information: 1. Machine and operating system (e.g., VAX-11/780, 4.3 BSD UNIX) 2. Network software in use (e.g., 3-Com UNET) 3. Complete list of available FTP commands (e.g., GET, PUT, etc.) Important files in the and archives are the CATALOG files. These files, which are stored in ASCII, contain the "-CATALOG.nnn" files from all the volumes of their respective archives. To obtain these composite catalog files, connect to SIMTEL20 via FTP and get these files: pd2:cpmug.cat pd1:pcblue.cat Similar files exist for the archive, but they are stored in squeezed form. These files, when unsqueezed, yields SIG0.CAT and SIG1.CAT (the catalog). pd2:sig0.cqt pd2:sig1.cqt (NOTE: That's "L-and-three-zeros" in "vol000") FILE TRANSFER VIA FTP FTP stands for File Transfer Protocol, a formalized procedure for moving files among machines on the Defense Data Network (DDN) and other networks that connect with the DDN. The protocol is implemented by a program often called FTP. The different mainframe operating systems implement FTP with variations in command syntax. Some systems have the remote-file-name precede the local-file-name in the command. Others reverse this order. Some versions have the whole command on a single input line, while others use multiple lines. Read the documentation for your local system, or consult a friendly system wizard for the details of your local FTP command syntax. UNIX users can do something like "man ftp" for on-line instructions. However, not all UNIX FTP programs are called "ftp", so you may have to snoop around in the system directories or ask a system wizard for the correct local name to use with the "man" command. ITS users can do ":INFO FTP", and "HELP FTP" works on TOPS-20 and some other operating systems. I will be happy to update this message with pointers to other sources of on-line documentation if they are sent to w8sdz@WSMR-SIMTEL20.ARMY.MIL. FTP transfers from SIMTEL20 can be made with user-name "anonymous". Use GUEST for the password. For anonymous logins, SIMTEL20 supports the FTP "change working directory" command. (Your local syntax may be something like CD, or CWD). Ignore the message which may appear that prompts you to enter a password. This command allows you to specify a default SIMTEL20 directory to be used for all file retrievals, and thereby relieves you from having to repeatedly type "pdx:" as part of each filename. For example, you can do something like this: cd pd1: get filename-1 get filename-2 ...and so on instead of using the longer filename forms shown in previous examples. Users of TOPS-10, TENEX, or TOPS-20 systems can use "image" or "paged" mode for ALL transfers. UNIX and other users must use "ascii" mode for ASCII files, and "type tenex" or "type L 8" mode for binary files. All aspects of the FTP process for UNIX machines have been automated to a high degree by two programs in directory PD8:. With these programs, a simple command like "sh autoftp30.sh mylist &" can be run in no-hangup background mode to transfer multiple files from SIMTEL20 without the user remaining logged-in on the local system. For more information, get the file PD8:AUTOFTP30.TAR-Z, a compressed tar archive. After transferring it to your Unix host, rename to autoftp30.tar.Z, uncompress, and extract with tar. Also see BATCHFTP102.TAR-Z which is an enhanced version of autoftp. MAILING LIST CORRESPONDENCE ARCHIVES Copies of correspondence for several mailing lists are kept on SIMTEL20 in directories with names of the form PD2:, where "KEYWORD" has been chosen to indicate the associated mailing list. At present, the following correspondence archives are available: mailing list mail archive filename --------------- --------------------- ADA-SW PD2: AMETHYST-USERS PD2: INFO-68K PD2: INFO-APPLE PD2: INFO-CPM PD2: INFO-FORTH PD2: INFO-IBMPC PD2: INFO-MICRO PD2: INFO-MODEMS PD2: INFO-MODEMXX PD2: INFO-MODULA-2 PD2: INFO-PASCAL PD2: INFO-XENIX310 PD2: INFO-XMODEM PD2: NORTHSTAR-USERS PD2: UNIX-SW PD2: VIDEOTECH PD2: Descriptions of these and other mailing lists can be obtained via FTP with anonymous login (as for SIMTEL20) from FTP.NISC.SRI.COM. Ask for the file netinfo/interest-groups (an ASCII file). And please note, this is NOT on SIMTEL20. File names for SIMTEL20 mailing list correspondence archives have two forms. For example, in PD2:, which holds the INFO-CPM correspondence (the "INFO-" is assumed), the forms are: yymm.n-TXT or yymm.n-TXT-Z. Files with names ending in -Z were compressed with a Unix compress-compatible program. The characters "yymm" in the file names are the digits of the year and month of the messages in each particular file. The "n" was incremented as overflowed 150 disk pages (approximately 375K). The current month's correspondence is kept in CPM-ARCHIV.TXT, which is constantly growing as new messages arrive. There may also temporarily exist files named CURRENT.n-TXT, which hold the overflow of the current month's messages when CPM-ARCHIV.TXT is split into monthly files. Although INFO-CPM has been used as an example here, the same naming scheme is used for the other mailing list files as well. For a complete list of available files, connect to SIMTEL20 via FTP and do this: dir PD2: You will receive a list of names of the form: KEYWORD.DIRECTORY.n where "n" is one or more digits. For example, the INFO-CPM listing currently appears as "CPM.DIRECTORY.1" To then get a list of files in a particular archive, do this: dir PD2: where "keyword" (for example, "cpm") is chosen from the preceding list, and the word "directory" and the number "n" are not used. At present, all of these files are stored in ASCII. FTP PROBLEMS, FILE ERRORS, CONNECT OR LOGIN PROBLEMS System-related problems should be reported to ACTION@WSMR-SIMTEL20.ARMY.MIL. ADDITIONS, IMPROVEMENTS AND CORRECTIONS Suggestions for additions, improvements and corrections to this message are always welcome. Please send them to w8sdz@WSMR-SIMTEL20.ARMY.MIL. Contributions of public domain software are actively solicited. If you have something that seems appropriate for inclusion in the , , or archives, please contact Keith Petersen . Contact Richard Conn if you wish to contribute to the archive. Contact Robert Thum if you wish to contribute to the archive. Contact Dave Curry if you have something for the archive. Happy computing! Keith Petersen w8sdz@WSMR-SIMTEL20.Army.Mil ------------------------------ End of INFO-CPM Digest V91 Issue #104 ************************************* 9-Jun-91 23:26:27-MDT,8608;000000000000 Mail-From: W8SDZ created at 9-Jun-91 23:16:11 Return-Path: Date: Sun, 9 Jun 91 23:16:10 MDT From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V91 #105 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <910609231611.V91N105@WSMR-SIMTEL20.ARMY.MIL> INFO-CPM Digest Sun, 9 Jun 91 Volume 91 : Issue 105 Today's Topics: Brown Disk UHR-II floppy disks wanted DR PL/1 compiler for CP/M EXL.LBR - Types/extracts squeezed, crunched, LZH files I seem to have it now! Qterm progress report ---------------------------------------------------------------------- Date: 9 Jun 91 23:25:02 GMT From: baron!baron!pnet07!donm@nosc.mil (Don Maslin) Subject: Brown Disk UHR-II floppy disks wanted Message-ID: <1991Jun9.232502.20279@baron.uucp> I am looking to locate and purchase some extra high density floppy disks that were used in the Drivetec 320 drives, as in the Kaypro Robie and the Kaypro 4X computers. They were made by Brown Disk in Colorado and were their model UHR-II. (Maxell may also have made some.) The disks are a preformatted servo track type with usable space of 2.67 mb. They are 192 tpi, and were formatted with 17 512 byte sectors per track. In appearance, they are very much like the conventional 5.25" floppy except for the notches in the jacket edge. See crude representation below: Drivetec drive floppy disk _________________________________________ | | | | | | | |<-- No notch here | | | _ | | / \ | | \_/ | | _ O | | / \ | | | | | Retention \ | | | Notch / | | | | | | | | _ \_/ | |________| |____________________________| | |-- Disk Identification notch If anyone has any of these 'lovelies' or knows where some might be found, I would surely be interested in hearing about it and making a bid on them (always assuming that the quantities are not in the thousands!). Thanks for you time. - don Keeper of the CP/M System Disk | UUCP: {nosc ucsd crash ncr-sd}!pnet07!donm Archives for the Dino(saur)SIG | ARPA: simasd!pnet07!donm@nosc.mil - San Diego Computer Society - | INET: donm@pnet07.cts.com ------------------------------ Date: Sun, 9 Jun 91 16:39:11 PDT From: cwr@pnet01.cts.com (Will Rose) Subject: DR PL/1 compiler for CP/M Message-ID: One place to look for this compiler would be UK, where a couple of years ago it was sold on *3-inch* disks for the Amstrad. I ignored it then, but a couple of weeks back thought I'd buy a copy, for fun. Sure enough, it was no longer around - but someone probably has a second-hand one. Good luck - Will ----------------------------------------------------------------------- "If heaven too had passions | Will Rose even heaven would | UUCP: {nosc ucsd hplabs!hp-sdd}!crash!pnet01!cw grow old." - Li Ho. | ARPA: crash!pnet01!cwr@nosc.mil | INET: cwr@pnet01.cts.com UUCP: {nosc ucsd hplabs!hp-sdd}!crash!pnet01!cwr ARPA: crash!pnet01!cwr@nosc.mil INET: cwr@pnet01.cts.com ------------------------------ Date: Tue, 4 Jun 91 16:03:45 EDT From: Mike Freeman Subject: EXL.LBR - Types/extracts squeezed, crunched, LZH files Summary: Reposted by Keith Petersen Message-ID: I have uploaded to SIMTEL20: pd2: EXL.LBR Types/extracts squeezed, crunched, LZH files EXL is a program that will type or print squeezed (.?Q?) crunched (.?Z?) or LZH compressed (.?Y?) files. It will also uncompress these to a disk file. In addition, it will do this directly out of a .LBR file, so it is possible to type a LZH compressed file that is inside a .LBR, or print it, or extract it to disk. It also has full user area support: users 0 through 31 can be accessed. Hint - try 'A>EXL EXL EXL.DYC' Mike Freeman freeman@watsun.cc.columbia.edu ------------------------------ Date: Sun, 9 Jun 91 18:26:06 EDT From: Steve_Graham@ub.cc.umich.edu Subject: I seem to have it now! Message-ID: <9052584@ub.cc.umich.edu> Sorry for wasting space, but I have QTERM mostly working now. At least as far as I have yet explored. The problems I was having with vt100 resulted from havi having junk character trapping turned on. Still drops the odd character at 2400 baud, but not when I'm using vt100 functions, so that's tolerable. I like this. The vt100 emulator is much nicer than the one I had been using. Does anyon have handy a list of the most commonly used vt100 functions? I know only that control-r redraws the screen, for instance. (The "function keys" themselves are another matter. I have figured out how to use escape+ sequences to do some of that stuff.) Well now I'll run along and read the docs like a good little cp/m-er. Those of you who wrote to me asking for help with the thing please send more mail: I've lost most of your addresses. -------------------------- Different subject: One of you was asking for help getting something to format disks for the osborne I. I can write disks in Osborne I sd or dd formats on the Kaypro, and send you a disk with some cp/m things on it, if that would work. Let me know. (My direct mail bounced) --Steve ------------------------------ Date: Sun, 9 Jun 91 17:52:36 EDT From: Steve_Graham@ub.cc.umich.edu Subject: Qterm progress report Message-ID: <9052520@ub.cc.umich.edu> For all of you waiting with baited breath to hear if I got QTERM running on my Kaypro II, the answer is, sort of. At 2400 baud characters are dropped. This also happens with several other terminal programs (MEX, KERMIT, and a vt100 emulator that I'm using at the moment), most notably in the third column. There is one program, FASTTERM, that avoids this problem on this machine at that speed, so it seems to be possible. If I turn on the "junk character trap" about half or more of the incoming characters are missing. vt100 emulation does not work at all. All I get is a row of +++++ with some incoming characters let through at random. If you have any suggestions about this I'd love to hear, because the vt100 ability is one of the things that most strongly attracted me to QTERM in the first place. I used the QT-KPRO patch to set this up, by the way. So far I haven't had time to look over the docs thoroughly. I did note a scrambled line in QTERM.DOC. Near the bottom of the first page of printed output are a couple of lines as follows: "? -Print help - QTERM provides a brief synopsis of the available commands. a 3/10th second break. , - Hang up modem - " (etc.) Is this a typo, or have I yet again got a corrupted file (in which case all bets are off anyway)? One other thing: I have retrieved and downloaded the files twice from Simtel. Using EXL to unpack them, there's a junk trailing character on the end of the patch filenames, so QT-KPRO.Z becomes QT-KPRO.Z ' (except that the ' is the other way around--I don't know how to produce that character). Is this normal? I've been having trouble ftp-ing files from Simtel. The trend is that they start sending ok, then slow down after about 30k has been sent, get slower, slower, and finally timeout, sometimes after about an hour. Anyone else having trouble, or should I look to the local system? --Steve Graham (sg2@ub.cc.umich.edu) ------------------------------ End of INFO-CPM Digest V91 Issue #105 ************************************* 10-Jun-91 03:20:52-MDT,13510;000000000000 Return-Path: Date: Mon, 10 Jun 91 03:15:04 MDT From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V91 #106 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <910610031505.V91N106@WSMR-SIMTEL20.ARMY.MIL> INFO-CPM Digest Mon, 10 Jun 91 Volume 91 : Issue 106 Today's Topics: Kaypro Video MIX C Compiler PL/I TeleVideo 1603 ---------------------------------------------------------------------- Date: 10 Jun 91 05:30:56 GMT From: pa.dec.com!daemon@decwrl.dec.com (Rob Borsari) Subject: Kaypro Video Message-ID: <9106100530.AA02827@melmac.umd.edu> Hello, I have a Kaypro 16 2e that I am converting to an amiga 500. I have no docs for the machine and I need the format and pinout of the monitor. I would be very thankful for any information or pointers to info. Please reply by E-mail and I will sumarize. TIA -R- -- jake@melmac.umd.edu Rob Borsari "Bourne to be wild" ------------------------------ Date: Mon, 10 Jun 91 04:51:27 -0400 From: ac959@cleveland.Freenet.Edu Subject: MIX C Compiler Message-ID: <9106100851.AA00193@cwns1.INS.CWRU.Edu> Is MIX C still available? Can it be gotten via mail-order or does it have to be bought from the manufacturer? Any information about where to get it or comments about the compiler are welcome. Ben Wildasin Internet: bwildasi@silver.ucs.indiana.edu *************************************** Ben, Yes, MIX C compiler is still available and you can get it from me. The price is $20.00 plus $5.00 S&H for either the CP/M or the IBMPC version or $30.00 for both. The manual alone is well worth the price. If you're interested in ordering or for additional info, contact me at any address below. Take care. ###  -- Ed Grey \*\ Sysop of The Grey Matter BBS & RCP/M 213-971-6260 P.O. Box #2186 \*\ Bitnet: ac959%cleveland.freenet.edu@cunyvm Inglewood, CA 90305 \*\ Internet: ac959@cleveland.freenet.edu USA \*\ v.: 213-759-7406 \*\ Fido: 1:102/752 \*\ GEnie: E.GREY1 ------------------------------ Date: Mon, 10 Jun 1991 02:24:53 -0400 (EDT) From: John C Klensin Subject: PL/I Message-ID: <676535093.481050.KLENSIN@INFOODS.MIT.EDU> I replied privately on this, but, since there seems to be some confusion and enough interest, this is intended to be a clarification/correction to several recent messages. --There are two ANSI Standards for PL/I, with ISO parallels. They are, respectively, ANSI X3.53-1976, Reaffirmed 1987. Also known as ISO6166. This describes "full" PL/I. Implementations claiming conformance to this are, or were, available from PRIME and several mainframe-sized machines of the Honeywell (Bull), Sperry (Univac), Sperry (Burroughs), etc., persuasion. For a number of technical reasons, the IBM compilers for the 370-architecture machines do not conform to this Standard, but, if one avoids certain uses of the aggregate language and programs around a few built-in functions, the level of compatibility is reasonably good. ANSI X3.74-1987. Also known as ISO6522. This describes "PL/I General Purpose Subset" (USA) or "General Purpose PL/I" (ISO). This is a language that contains most important features of X3.53, plus a few updating extensions. It is intended to be very portable, yet large enough to do useful applications work. The original version of this Standard (see below) did not have the latter property, and may have lacked the former one. It would take a relatively small number of upward-compatible modifications to bring, either the IBM mainframe compilers or an X3.53-conforming compiler into conformance with this. It is inappropriate for anyone to claim conformance to any other Standard at this point. However, there was a previous version of X3.74, completed in 1981. It represents a smaller subset of the language than the 1987 version, a subset that turned out, in practice, to be much too small for practical and portable applications work, although it was adequate for certain systems programming tasks, such as writing PL/I (and other) compilers. The DEC VAX/VMS and Data General compilers, at least one of the [non-mainframe] IBM compilers, and several other things floating around claim conformance to X3.74-1981. Almost all of these contain extensions that bring the general size of the language to approximately that of X3.74-1987: each vendor's customers discovered that the 1981 subset was too small to do practical work and insisted on modifications. Now... >I saw an ad in PC Week (or was it Byte?) some months ago for a PL\I compiler >for '386s. It wasn't DR or MS or IBM. Almost certainly LPI. LPI claims conformance to X3.74 and, in their advertising, strongly implies that the "X3.74" they are talking about is the current (1987) version. It isn't. They have an implementation that, at best, narrowly conforms to the obsolete 1981 version. Comments above about the suitability of the 1981 version apply. Questions have been raised about even that level of conformance, and LPI has historically (I haven't called them in a year or so) not been enthused about outside critical evaluation. I have heard from a number of unhappy customers, but it could be a biased sample. The LPI compilers are not in the "cheap" or "free" category, by a considerable margin. They run under several flavors of U**X, and on an MSDOS base. If I recall, the latter require 386s and significant memory. >>I need to obtain a PL/I compiler (close to full implementation) for any of Something could be "close to full implementation" if it conformed, or nearly conformed, to one of: ANSI X3.53-1976 / ISO6166 ANSI X.74-1997 / ISO6522 The de facto "standard" of the IBM PL/I Optimizing Compiler. >> Microport Unix System V/386 Possibly LPI. But expensive and not nearly a "full implementation" >> MS-DOS Possibly LPI. Also see below. >> CP/M (just about any soft-sector 5 1/4" format will do). See below. >Well, the beast compiler we used to use on our >IBM 370 was a wee bit on the overweight side. I mean, when you >stuff all the goodies from Algol, COBOL, FORTRAN and whatnot >in one bag, it won't exactly be petite. An old and interesting slander. X3.53-1976 is a smaller language than today's Ada, which exists on several of the machine types cited. And X3.74 (even the 1987 version) is arguably smaller than the proposed Fortran 9X and even the current version of ANSI/ISO BASIC. One way to view the derivation process that produced X3.74 was that the committee went back to X3.53 and pruned everything that was not appropriate for wide implementation, everything that was really not needed for any good purpose or that had been proven to be error-prone, and everything that could not be done in a way that permitted widely-available and accepted implementations to conform. It is really a nice way to work on a standard or anything else, and, if done well, produces a great deal of cleanliness as distinct from the appearance of warts on cancerous growths that is often associated with stuffing several generations of "modern" features into languages that were never intended to accomodate them. How do I know? I chaired the committee during most of the critical period. Keep in mind that the first serious commercial implementations of PL/I, the so-called IBM PL/I level F and level D compilers, ran on machines that, by today's standards, were very small. The level D compiler in particular ran on the System 360/Model 20, a 16 bit machine that was typically configured with 16Kb or less of memory and that would run only about 2/3 of the 360 instruction set. >Digital Research Inc sold a PL/1G compiler for CP/M. "G" was supposed to be >a relatively machine independent subset of fully bloated IBM PL/1. >Supposedly a semi-international standard. PL/1 G was available on a lot of >different platforms. Maybe DRI still has a few copies of it, perhaps for >machines other than CP/M. During its development period in circa 1975-1980, the standards technical committee (called "X3J1", another term you will see floating around) referred to what became X3.74-1981 as "subset G". That internal terminology was picked up by DRI to make make "PL/I-G" and "Subset G PL/I" terms. Neither language ever existed in the standards arena. More important, whatever they are, they are not PL/I even though they share syntax with it. Their implementations of a number of features are, to put it mildly, "novel". And, has been mentioned, their implementations are infested with bugs. My impression, from having used all three, is that the CP/M-80 version is in better shape than the CP/M-86 version, which is in better shape than the MSDOS version. None of the three were ever actively and effectively maintained and that situation got worse when DRI effectively went out of the language business. >Also, LPI (I think it was LPI, or maybe it was Greenhills) builds their >compilers in PL/1, and since they have to port PL/1 first to each platform, >there's likely to be a commercial version of their PL/1 for the platform you >want. It is, or was, LPI. If, by "commercial", you mean "they sell it", then "yes". If "commercial" means "suitable for developing commercial programs", then this is questionable. >I pondered using PL/1G on my CP/M machine, then I discovered it didn't allow >you to "*" array declarations in procedure argument declarations so I >abandoned it. Or bit strings longer than 16 bits, or many uses of BASED variables, or the PL/I condition-handling model, or,..... >Microsoft did have a CP/M version of PL/I. No, Microsoft didn't. Digital Research did. The original CP/M-80 version started as a pet project of Gary Kildall's. >I have it laying around somewhere, sans docs, The quality of the documentation was such that you aren't missing very much. >but I seem to remember it was a pretty good language. The nasty comments above relate to the relationship between what DRI was selling and "full implementation" or "Standard" PL/I. If one viewed it as a PL/I-like language and could work around the bugs and idiosyncracies in that context, the code quality, optimizations, etc., especially of the CP/M-80 version were somewhere between "excellent" and "outstanding". IBM does make a compiler for OS/2. I have not tested it, but, from what I can tell from documents and rumors, it appears to be pretty solid. I understand IBM has announced that conformance to X3.74-1987 is a strategic direction (or words to that effect) for this compiler. --john klensin Klensin@INFOODS.MIT.EDU Opinions expressed above are mine, and do not necessarily represent those of ANSI, X3, ISO, MIT, or the various parties whose names I've mentioned. Trademarks are the properties of their respective owners. Despite their repeated advertising, "PL/I" is not a trademark of Digital Research Inc. ------------------------------ Date: Mon, 10 Jun 91 04:53:26 -0400 From: ac959@cleveland.Freenet.Edu Subject: TeleVideo 1603 Message-ID: <9106100853.AA00261@cwns1.INS.CWRU.Edu> I have a Televideo model TS-1603 that I aquired a few years ago, and just recently have renewed interest in setting it up. It is a CPM machine with Two half height floppys, a 14" monitor and I think 128K ram ( It has been a while; I not possitive about the ram size). Anyways, Does anyone in netland know of this machine? Will this machine run some of the earlier DOS software? If not, is there some sort of conversion program to allow this? Where can I find a mouse and driver software for this unit. In general, Is this machine worth booting up and spending some money on. I am trying to expand my computational- horizons and figure that this machine should be capable of providing me with some hours of programming enjoyment. Any information would be useful and greatly appreciated!! Ken Smith < kens@net,com> **************************************** Ken, I am familiar with (though I've never seen one) the TeleVideo 1603. It is a 16 bit computer, so it would run the CP/M-86 flavor of CP/M (an important distinction when looking for software). It will also run an early version of IBM PCDOS (probably 2.0 or some such). It is expandable to 256K RAM. I hope that this info was of some help. Take care. ###  -- Ed Grey \*\ Sysop of The Grey Matter BBS & RCP/M 213-971-6260 P.O. Box #2186 \*\ Bitnet: ac959%cleveland.freenet.edu@cunyvm Inglewood, CA 90305 \*\ Internet: ac959@cleveland.freenet.edu USA \*\ v.: 213-759-7406 \*\ Fido: 1:102/752 \*\ GEnie: E.GREY1 ------------------------------ End of INFO-CPM Digest V91 Issue #106 ************************************* 10-Jun-91 07:23:22-MDT,12636;000000000000 Return-Path: Date: Mon, 10 Jun 91 07:15:44 MDT From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V91 #107 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <910610071545.V91N107@WSMR-SIMTEL20.ARMY.MIL> INFO-CPM Digest Mon, 10 Jun 91 Volume 91 : Issue 107 Today's Topics: How to upload to SIMTEL20 Re: PL/I compiler (SUMMARY) ---------------------------------------------------------------------- Date: Mon, 10 Jun 1991 04:14 MDT From: Keith Petersen Subject: How to upload to SIMTEL20 Message-ID: I have received many inquiries about why SIMTEL20 does not publish instructions for uploading files for those who wish to submit their programs. The reason is that we prefer to coordinate uploads by having contributors contact us first so we can check to make sure the program is not already in the repository. File uploads are accepted via FTP using a special uploading account, and via e-mail using a special mailbox which does not interfere with regular correspondence. If you have a program to upload please send e-mail to me with a short description of the files you wish to submit. Thanks to all those who are actively supporting the respository by helping us keep up to date with the latest programs. Keith -- Keith Petersen Maintainer of the MSDOS, MISC and CP/M archives at SIMTEL20 [192.88.110.20] Internet: w8sdz@WSMR-SIMTEL20.Army.Mil or w8sdz@vela.acs.oakland.edu Uucp: uunet!wsmr-simtel20.army.mil!w8sdz BITNET: w8sdz@OAKLAND ------------------------------ Date: 10 Jun 91 08:19:58 GMT From: weyrich!orville@uunet.uu.net (Orville R. Weyrich) Subject: Re: PL/I compiler (SUMMARY) Message-ID: <1991Jun10.081958.363@weyrich.UUCP> In article <1991Jun4.073924.2610@weyrich.UUCP> orville@weyrich.UUCP (Orville R. Weyrich) writes: > >I need to obtain a PL/I compiler (close to full implementation) for any of >the three computers which I have: > > Microport Unix System V/386 > > MS-DOS > > CP/M (just about any soft-sector 5 1/4" format will do). > >I would be grateful for any recommendations as to where I can find such an >animal. > >Also, if you have one you don't need, how about letting me have it cheap? > Thanks for all the replies to my request for information on PL/I compilers. Any additions or corrections are welcome. Several persons offered me compilers, and several other persons asked for leads on how to obtain compilers. I will put these folks in touch after I get mine :-). I summarize below [shamelessly edited] replies from the following individuals: mcnc.org!dg-rtp.dg.com!cochran (Dave Cochran) emory!pecanpi!syoung (Stan Young) prodnet.la.locus.com!jfr (Jon Rosen) mailrus!umich!vela!amaranth (Paul Amaranth) racerx!ken (Ken Hardy) grian.cps.altadena.ca.us!morris (Mike Morris) software.org!cox (Guy Cox) bony1.bony.com!stevef (Steve Faiwiszewski) magrethea.matrox.com!danderso dww@math.fu-berlin.de (Debora Weber-Wulff) INFOODS.MIT.EDU!KLENSIN (John C Klensin) ihlpm.att.com!db21 (David Beyerl) shore@theory.tn.cornell.edu (Melinda Shore) tpoind@skipy (Tom Poindexter) jamesp@world.std.com (james M peterson) kludge@grissom.larc.nasa.gov ( Scott Dorsey) bill@ssbn.WLK.COM (Bill Kennedy) vsnyder@jato.jpl.nasa.gov (Van Snyder) clewis@ferret.ocunix.on.ca (Chris Lewis) ========================= Digital Research PL/I for CP/M ======================= PL/I? On an MS-DOS or CP/M (!!!) platform with close to full implementation? Well, the beast compiler we used to use on our IBM 370 was a wee bit on the overweight side. I mean, when you stuff all the goodies from Algol, COBOL, FORTRAN and what-not in one bag, it won't exactly be petite. But lots of luck, and let us know if you find anything! [Do you mean the one that would compile a blank card, produce a bunch of error messages like "missing BEGIN -- generated", etc. to produce an executable load module that occupied quite a few K of memory and which had the same effect as IEFBR14? :-)] Remember that long ago, in a place far away, FORTRAN & COBOL were compiled on cpus with 4096 words of memory (not kilobytes or megabytes, just 4,096). Digital Research Inc. sold a PL/1G compiler for CP/M. "G" was supposed to be a relatively machine independent subset of fully bloated IBM PL/1. Supposedly a semi-international standard. PL/1 G was available on a lot of different platforms. I've got a copy of Digital Research's PL/I. This is a Subset G implementation, under CP/M. The package includes DR's RMAC (a fancy macro assembler), librarian, linker, other utilities, and the documentation. I also have DR's ISAM package (don't recall the name at the moment, but it was a nice little package for CP/M). I did have experience with the CP/M one. If I remember correctly (which may not be the case) Digital Research produced that one. It was not even a G subset and had enough limitations to drive you crazy. They ported it to MS-DOS without enhancements. I haven't heard anything about it for years. If that is all you can find, you have my sympathy. I did some programming projects with it at an old job many years ago. I don't know how complete you need, but it filled my bill. I don't know about the fate of PLI-80, but PLI-86 was sold to another company whose name I don't recall. It's supported pretty lousily. If you can get your hands on PLI-80, it might be sufficient for MS-DOS, using one of the commercial CPM/Z80 emulators (there are both hardware as well as software packages). It was very limited: 64K for code & 64K data on 8086, and of course 64k for CP/M-80. The code produced was very good though. We use it in 1985 to write a small cad package using GEM. They also had a database manager and a screen designer, which were sold as separate items. "PL/0.25" would be closer to the truth. It is also full of bugs, with the bug level increasing as one moves from CP/M-80 toward MessDOS. You can probably find someone to sell it to you, possibly even DRI. But they don't fix bugs, and the documentation stinks, and it isn't really PL/I in any of the conventional or Standard dialects. My dim recollection is that it was painfully slow and had about eleventy- five passes, but it may be what you're looking for. As I remember the Digital Research PL/I compiler was not real compatable with our VAX PL/I stuff - as in major recoding. The DR PL/I was a PL/I subset G compiler, whereas the VMS PL/I is a full implementation. PL/I was the Ada of the 1960's; enormous with every programmer using a different subset. [I think I object to Ada being compared to PL/I :-)] The DR compiler was still being sold as late as 1983. The Digital Research PL/I compiler was a rather rich subset G implementation. The G subset is far from "big" PL/I but it is quite adequate (I missed the select) for most practical things. Moreover, since PL/I is so unpopular, I found the code to be very portable, nobody wants to enhance anything. The most robust implementation was for CP/M-80, worked great on 8080, 8085, and Z80 machines, I never checked the later models. I pondered using PL/1G on my CP/M machine, then I discovered it didn't allow you to "*" array declarations in procedure argument declarations so I abandoned it. [Note -- Digital Research is still around -- I got some e-mail from someone there recently regarding another subject. I think their main product now is an MS-DOS clone. I don't know what the status of their PL/I product is]. ========================= Digital Research PL/I for MS-DOS ===================== It was distributed by Digital Research. The compiler first came out for 8080 in CP/M, then migrated to 8086 & MS-DOS. It was *quite* buggy; I don't think DR ever released any version beyond 1.0. The compiler supposedly supported PL/I ANSI Subset G. The CP/M-86 version was a hastily translated (the translate program was written in PL/I-80 and the turkeys lost the source!) and although a little wobbly, also worked rather well. When it appeared that CP/M-86 was going to lose, big time, to MS-DOS they did a quick and dirty conversion to MS-DOS 1.1 [sic] and it was the worst of the bunch. It was cantakerous and generally unreliable. I don't know which one IBM shipped, probably CP/M-86, I doubt that the DOS version could have passed even the least stringent acceptance tests. I can't guarantee the linker will work under 3.x or up since I have never tested it. I used it once under MS-DOS 2.x. ========================= Language Processors, Inc. ============================ Check with a company called Language Processors, Inc., in Massachusetts. I THINK that they are mostly Unix-based, but they may have MS-DOS compilers as well. Data General sells their PL/I compiler on 386/ix and on DG/UX. I have no phone number, but you can write to them at: Language Processors, Inc. 959 Concord St. Framingham, MA 01701 I know of two PL/I compilers available on Unix, one is made by LPI and the other is not commercially available. The only thing I know about the LPI compiler is that it's expensive. LPI makes a putative PL/I for several U**X environments and, allegedly, for MS-DOS (running in 386 mode with extenders, if I recall). I think their prices start in the $1200 vicinity and go up rapidly, but my memory is pretty vague. The compiler is close to, but not quite conforming (if I recall) to ANSI X3.74-1981. Unfortunately, that Standard is obsolete and represented a language a little too small to get any useful work done. And LPI has traditionally been very hard to deal with. LPI makes PL/I for '386 UNIX and while I have no experience with it, the genes are good. It, like LPI's other languages, was shrunk down from "big" PL/I and was written in PL/I. Maybe their C compiler is written in C, but I'm pretty sure their others are written in PL/I. I'm a little sorry that the language fell into such ill repute, if you avoid the chrome and tail fins it's a pretty good language. I lust for its BCD arithmetic for money calculations and I still understand its structures better than C. It's certainly possible to write a bad program in PL/I but it's lots easier to write something unreadable in C. [Please -- no language wars here!!!]. If LPI did V/386 PL/I correctly, I have no reason to believe they didn't, it should be trim and compact. They've certainly got their code generator act together by now and the linker shouldn't carry along any baggage you didn't ask for. I'll also speculate that it's subset G with some extensions (select maybe? huh? Huh? :-) which should be sufficient for as much work as you'd want to do on a '386. Also, LPI (I think it was LPI, or maybe it was Greenhills) builds their compilers in PL/1, and since they have to port PL/1 first to each platform, there's likely to be a commercial version of their PL/1 for the platform you want. ========================= Other Suggestions ============================ There is an IBM-supplied compiler that runs under OS/2. I haven't been able to exercise it, but it is apparently ok. But you didn't mention OS/2 in your little list. I also don't imagine it is cheap. There are a few folks around who claim to be able to translate PL/I automatically into, e.g., C. I don't believe a word of it, but could probably dig out a list if you wanted it. There is some sort of PL/I language *interpreter* on Simtel20. Look for RUNPLI or some such. I saw an ad in PC Week (or was it Byte?) some months ago for a PL/I compiler for '386s. It wasn't DR or MS or IBM. -------------------------------------- ****************************** Orville R. Weyrich, Jr., Ph.D. Certified Systems Professional Internet: orville%weyrich@uunet.uu.net Weyrich Computer Consulting Voice: (602) 391-0821 POB 5782, Scottsdale, AZ 85261 Fax: (602) 391-0023 (Yes! I'm available) -------------------------------------- ****************************** ------------------------------ End of INFO-CPM Digest V91 Issue #107 ************************************* 10-Jun-91 22:20:28-MDT,8932;000000000000 Return-Path: Date: Mon, 10 Jun 91 22:15:16 MDT From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V91 #108 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <910610221517.V91N108@WSMR-SIMTEL20.ARMY.MIL> INFO-CPM Digest Mon, 10 Jun 91 Volume 91 : Issue 108 Today's Topics: EXL File Extraction Problem Microbee Qterm progress report ?? Re: CP/M disk formats (was Re: CPM to DOS exchanger) Re: MIX C Re: Osborne I format problem Re: PL/I compiler (2 msgs) Re: Scott Adams adventures wanted ---------------------------------------------------------------------- Date: Mon, 10 Jun 91 16:48:07 EDT From: Mike Freeman Subject: EXL File Extraction Problem Message-ID: In a recent Info-CPM Digest issue, Steve Graham (steve_graham@ub.cc.umich.edu) reports a problem with EXL putting a spurious character in files extracted from a .LBR-file. This is indeed the case and the problem manifests itself when a file whose uncompressed filetype is a single character (e.g., .Z). Dunno whether a 2-character uncompressed filetype produces the problem. What happens is that instead of filling the remaining two bytes of the filetype with spaces (20H), only the first is so filled, the third byte being set to zero. This causes the file not to be accesible after extraction (though you can rename it with NSWEEP, DISK77 etc.). Am working on a patch now. ------------------------------ Date: 10 Jun 91 12:22:33 GMT From: agate!spool.mu.edu!munnari.oz.au!yoyo.aarnet.edu.au!sirius.ucs.adelaide.edu.au!spam!dcook@ucbvax.Berkeley.EDU (David Cook) Subject: Microbee Qterm progress report ?? Message-ID: <834@spam.ua.oz> Well, I haven't heard any replies to my earlier followup about QTerm on Microbee (CP/M) computers, so I decided to post this. My question : Has anyone got patches/working executable for QTerm on a Microbee system ? If not, has anyone got any information about programming I/O on a Microbee, or can anyone recommend any books on the subject. (If I have to I'll try to remember some Z80 assembler, and write the QTerm patches myself, but I have no information on using the PIO (or is it UART? - shows how little docs I have :) in the Microbee ) David T Cook | e-mail: dcook@spam.adelaide.edu.au | Phone: +61 8 228 5709 Assistant Computer Manager, Stats, Pure and Applied Maths LMG, Adelaide Uni "The wonderful thing about USENET is that anyone can express their opinion." "The worrying thing is that they _do_." ------------------------------ Date: 10 Jun 91 12:36:16 GMT From: eru!hagbard!sunic!dkuug!cri.dk!ns@bloom-beacon.mit.edu (Nick Sandru) Subject: Re: CP/M disk formats (was Re: CPM to DOS exchanger) Message-ID: bill@bilver.uucp (Bill Vermillion) writes: >Well I know of at least 1 other CPM machine that used 3.5" disks. >Sony. Another one is Commodore 128. It uses 3.5" disks with the Commodore 1581 disk drive (capacity: 796 Kbytes). >-- >Bill Vermillion - UUCP: ...!tarpit!bilver!bill > : bill@bilver.UUCP Nick Sandru -- .signature coming soon ------------------------------ Date: 10 Jun 91 18:09:34 GMT From: cis.ohio-state.edu!zaphod.mps.ohio-state.edu!maverick.ksu.ksu.edu!uafhp!acrosby@ucbvax.Berkeley.EDU (Albert Crosby) Subject: Re: MIX C Message-ID: <6700@uafhp.uark.edu> Yes, MIX C for CP/M is still avaialble from MIX Software. I've never heard of a mail-order house carrying it, but why worry? MIX has a watts line, and the price is undeer $20. Plus, you can get the same compiler for MS-DOS for only $5 more. Sorry, I don't have the watts or the address with me right now. The MIX C compiler is not ANSI-C compatible, though it is a decent compiler. They also make a POWER C compiler for MSDOS that is ANSI. [Nope, the $5 "upgrade" doesn't move you from MIX C to POWER C, MIX C is avail. on both platforms. ] ------------------------------ Date: 8 Jun 91 13:40:46 GMT From: nuchat!farwest!Uucp@uunet.uu.net (Charles Cotham) Subject: Re: Osborne I format problem Message-ID: <676476897.0@farwest.FidoNet> Gordon, Drop me a note at the address below with the information on your sign on screen, OCC, Nuevo, or what ever when you turn or the computer, and if you have a program like XDIR.COM to run and find out what the size of the disks are let me know that too, They could be 90, 180, 390, 0r 780 k drives dependent on what if any modifications have been made. I have copy progams for 90, 180, and 780 on my O-1's. Unless you just have something real unusual I can probably help. Let me know if there is any other type of Osborne prog you need help finding in the note, I might have it. I only get on the Echo every other week or so, and if you just leave a message here, There is a good chance I will never see it. Type at you later... Charles Cotham 2205 Lilac St. Nederland, Tx 77627 * Origin: Two Wheelers - The Bicylists' Communications Link (1:106/88) ------------------------------ Date: 10 Jun 91 16:33:32 GMT From: cadence!acae037!eversole@uunet.uu.net (Richard Eversole; x6239) Subject: Re: PL/I compiler Message-ID: <1991Jun10.163332.29768@cadence.com> As of 1988 the VAX VMS PL/I compiler was not a full implementation of the language as defined by IBM. I had a 65,000 line PL/I program for the IBM 3090 that required 15,000 lines of changes just to get it to compile under VAX PL/I. Unfortunately, the program also required a CODASYL compliant database which was not available for the VAX at our site at that time. I do not remember the exact problems but they were subtle uses of the language. The only company I'm aware of that has a PL/I compiler that may be of any value is LPI (I do not have the address). Unfortunately, I think their compilers only run under UNIX and maybe a handful of other operating systems (But not MESSDOS). DR's PL/I compiler is garbage. All "Subset G" PL/I compilers are going to be worthless if you are transferring from an IBM mainframe compiler. -- ===================================================================== eversole@cadence.com Live long and prosper ! ------------------------------ Date: 10 Jun 91 12:48:14 GMT From: cis.ohio-state.edu!zaphod.mps.ohio-state.edu!swrinde!cs.utexas.edu!csc.ti.com!ti-csl!tilde.csc.ti.com!ticipa!tifsim.pac.sc.ti.com!stinson@ucbvax.Berkeley.EDU (Jim Stinson) Subject: Re: PL/I compiler Message-ID: <1991Jun10.124814.12965@ticipa.pac.sc.ti.com> Digital Research's PL/I compiler was very screwed up. After buying the compiler for $600 - $500, and sending in the registration form, they set a list of about 50 or more bugs with it. Things like A = A * B where A and B were floating point numbers messed up the stack and you program would eventually dump. X = 105331 where X is an integer, would assign 15331, that is, the comiler would drop 0's from integer constants from time to time. There were others, I don't remember them all, I just could not believe some one would sell a compiler for so much knowing it did not work and wouldn't give refunds. Jim Stinson stinson@tifsim.csc.ti.com, @tifsim.pac.sc.ti.com ------------------------------ Date: Mon, 10 Jun 91 18:36:34 GMT From: Christopher Currie Subject: Re: Scott Adams adventures wanted If you have a PC you can run the Newdos80 Scott Adams adventures using the Pc-Three TRS80 Model III emulator from Hypersoft (PO Box 51155, Raleigh, NC 27609). However, it's not cheap (around 100 dollars or more). You will also need a double-density, legal, MIII Newdos80 system disk (PC Three can't read SD). Newdos80 is not CP/M compatible. There may be a further problem: some of the Scott Adams adventures for the TRS-80 were distributed on tape, but you could run them from a Newdos80 disk by using Apparat's LMOFFSET program. A game doctored in this way for a TRS-80 Model I won't necessarily work on a Model III (and thus on the emulator). A genuine disk version should be OK. I have one (demo) SA adventure for the Model III, and would be glad to hear from anyone wanting to give away unused copies of others. I've had to sign off this list, so won't be around to receive comments. (I wish there was a list for TRS-80 users, but I've never found one on the net. ) Christopher ------------------------------ End of INFO-CPM Digest V91 Issue #108 ************************************* 11-Jun-91 14:27:55-MDT,9106;000000000000 Return-Path: Date: Tue, 11 Jun 91 14:15:11 MDT From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V91 #109 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <910611141512.V91N109@WSMR-SIMTEL20.ARMY.MIL> INFO-CPM Digest Tue, 11 Jun 91 Volume 91 : Issue 109 Today's Topics: CP/M Disk Formats CP/M emulators on unix systems DRI's MAC Assembler Info needed on Zenith Z100 Re: PL/I compiler (3 msgs) Re: PL/I compiler (SUMMARY) ---------------------------------------------------------------------- Date: Tue, 11 Jun 91 13:25:36 EDT From: Mike Freeman Subject: CP/M Disk Formats Message-ID: The Hewlett-Packard HP-125 Business Assistant has 3.5" drives; 252K total capacity, 248K user space. The disks are DSDD (but not, I believe, the new "high-density" variety). I'd be interested in software for the HP-125 to write in IBM-compatible formats. -- Mike Freeman K7UIJ -- ------------------------------ Date: 10 Jun 91 21:18:18 GMT From: eru!hagbard!sunic!dkuug!imada!ravn@bloom-beacon.mit.edu (Thorbjoern Ravn Andersen) Subject: CP/M emulators on unix systems Message-ID: <1991Jun10.211818.2869@imada.ou.dk> Sometime ago I posted a request regarding CP/M emulators running on un*x, and offered to summarize. This is it and, alas, very short. I only got information from D'Arcy J.M. Cain (darcy@druid), who pointed towards sipb.mit.edu pub/druid/cp-emulate (old info, cannot ftp right now) which I have downloaded, but it won't run straight out of the box. -- Thorbj\o{}rn Ravn Andersen ravn@imada.ou.dk -- Thorbj\o{}rn Ravn Andersen 'Normally I kill people for money. You are my ravn@imada.ou.dk friend; I will kill you for nothing' -- Chico Marx ------------------------------ Date: Tue, 11 Jun 91 13:22:25 EDT From: Mike Freeman Subject: DRI's MAC Assembler Message-ID: Anyone have a copy of DRI's MAC assembler lying around they don't need? There's some software that requires it for assembly I'd like to tinker with. I have a Telcon Zorba (40 tracks, 80 sectors/track, 388K usable space) and also a HP-125 DSDD 248K usable space. The former is 5.25" drive, tha latter 3.5". Thanks in advance. -- Mike K7UIJ -- ------------------------------ Date: Tue, 11 Jun 1991 11:01:07 PDT From: sprague.wbst311@xerox.com Subject: Info needed on Zenith Z100 Message-ID: <"11-Jun-91 14:01:07 EDT".*.Michael_D._Sprague.wbst311@Xerox.com> I picked up a Zenith Z100 for $25 (I'm a sucker for that sort of deal). I have CP/M-85 (disks and documentation), CP/M-86 (disks and documentation), MS-DOS 2.1 (disk only) and a couple of application programs for it. Does anyone have any documentation on the computer itself? Is that bus inside an S-100 bus? If so, anyone know if and what memory expansion boards were used in it? Thanks much! ~ Mike (Sprague.Wbst311@Xerox.Com) ------------------------------ Date: 11 Jun 91 00:30:58 GMT From: cis.ohio-state.edu!zaphod.mps.ohio-state.edu!swrinde!cs.utexas.edu!execu!sequoia!balkan!wrangler!ssbn!bill@ucbvax.Berkeley.EDU (Bill Kennedy) Subject: Re: PL/I compiler Message-ID: <2080@ssbn.WLK.COM> I have been reading this thread with considerable interest because I have used each of the Digital Research PL/I implementations with varying degrees of success. DRI has a couple of grand of my shekels, bought 'em all, and I share some of Jim's opinions but not all of them. stinson@tifsim.pac.sc.ti.com (Jim Stinson) writes: > >Digital Research's PL/I compiler was very screwed up. After buying the compiler >for $600 - $500, and sending in the registration form, they set a list of about This could very well be the case with the DOS version, it was a hastily converted derivative of the CP/M-86 version which was a hastily translated derivative of the CP/M-80 version. I found PL/I-80 to be a very reliable and robust compiler that was able to do a lot of nifty things on an 8 bit machine. Even as we phosphor I have an application running on an ancient IMSAI in PL/I-80, I installed it in October 1984 and there has never been so much as a whimper out of it. It's heavily overlaid but when you've only got 64K for the OS and everyone on earth, it's to PL/I-80's credit that it works as well as it does and overlays as well as it does. >50 or more bugs with it. Things like A = A * B where A and B were floating >point numbers messed up the stack and you program would eventually dump. >X = 105331 where X is an integer, would assign 15331, that is, the comiler >would drop 0's from integer constants from time to time. There were others, >I don't remember them all, I just could not believe some one would sell a >compiler for so much knowing it did not work and wouldn't give refunds. > > Jim Stinson stinson@tifsim.csc.ti.com, @tifsim.pac.sc.ti.com I share Jim's feelings about the later "releases". DRI just grabbed a can of paint and tried to paint the horse and call it a zebra. What was especially irritating was (after paying them for "Professional Programmer Support") to report a lethal bug and getting a letter back saying that the problem was indeed reproducible but the product was "mature and no longer in need of support". The one that comes to mind in the DOS world was when you went to the second level overlay having PL/I get it's FCB's crossed and display your Access Manager index files as screens and use you Display Manager files as AM indicies... -- Bill Kennedy internet bill@ssbn.WLK.COM or ssbn!bill@attmail.COM uucp {att,cs.utexas.edu,pyramid!daver}!ssbn.wlk.com!bill ------------------------------ Date: 10 Jun 91 22:04:48 GMT From: cis.ohio-state.edu!zaphod.mps.ohio-state.edu!sdd.hp.com!cs.utexas.edu!chinacat!holston!barton@ucbvax.Berkeley.EDU (Barton A. Fisk) Subject: Re: PL/I compiler Message-ID: <5909@holston.UUCP> In article <60LR3ND@math.fu-berlin.de> dww@math.fu-berlin.de (Debora Weber-Wulff) writes: >orville@weyrich.UUCP (Orville R. Weyrich) writes: >> >>I need to obtain a PL/I compiler (close to full implementation) for any of >> >> Microport Unix System V/386 >> MS-DOS >> CP/M (just about any soft-sector 5 1/4" format will do). > >PL/I? On an MS-DOS or CP/M (!!!) platform with close to full >in one bag, it won't exactly be petite. But lots of luck, and let >us know if you find anything! LPI just announced PL/I for RS6000, SPARC, M88000, i386/486 systems running UNIX as well as 386/486 running DOS. The sheet says it's an ANSI PL/I X3.74 1981 General Purpose subset and includes extensions for compatibility with PL/I dialects for IBM mainframes, and DEC VAX. Never used it myself, but looks like what you're looking for LPI's number is 1-800-833-3678. I have no affiliation with them just a satisfied user. (of another one of their products) -- uucp: holston!barton pseudo: barton@holston.UUCP ------------------------------ Date: 11 Jun 91 18:36:26 GMT From: cis.ohio-state.edu!zaphod.mps.ohio-state.edu!rphroy!trux!car@ucbvax.Berkeley.EDU (Chris Rende) Subject: Re: PL/I compiler Message-ID: <551@trux.UUCP> From article <60LR3ND@math.fu-berlin.de>, by dww@math.fu-berlin.de (Debora Weber-Wulff): > > PL/I? On an MS-DOS or CP/M (!!!) platform with close to full > implementation? > > email: weberwu@inf.fu-berlin.de, dww@math.fu-berlin.de Actually, "Control Program for Microcomputers" (CP/M) was created to serve as an O/S base for "Programming Language for Microcomputers" (PL/M). [ Where PL/M is a subset of PL/I - not "close to full implementation" ]. However, CP/M became popular in its own right as a stand-alone operating system. So the thought of running PL/M on CP/M isn't as far fetched as one would think. car. -- Christopher A. Rende Central Cartage (Nixdorf/Pyramid/SysVR2/BSD4.3) uunet!edsews!rphroy!trux!car Multics,DTSS,Unix,Shortwave,Scanners,UnixPC/3B1 car@trux.mi.org Minix 1.2,PC/XT,Mac+,TRS-80 Model I,1802 ELF trux!ramecs!car "I don't ever remember forgetting anything." - Chris Rende ------------------------------ Date: 10 Jun 91 23:36:06 GMT From: borland.com!alexande@decwrl.dec.com (Mark Alexander) Subject: Re: PL/I compiler (SUMMARY) Message-ID: <1991Jun10.233606.12302@borland.com> DRI started abandoning their language products around the time I joined the company 7 years ago. If you called them now and asked about PL/I, they probably wouldn't know what you were talking about. ------------------------------ End of INFO-CPM Digest V91 Issue #109 ************************************* 12-Jun-91 17:20:23-MDT,9617;000000000000 Return-Path: Date: Wed, 12 Jun 91 17:16:38 MDT From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V91 #110 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <910612171643.V91N110@WSMR-SIMTEL20.ARMY.MIL> INFO-CPM Digest Wed, 12 Jun 91 Volume 91 : Issue 110 Today's Topics: EXL Output Filename Problem Solved Help needed: Compupro 8/16 running concurrent cp/m How to decompress "*.?Y?" files? MTS/Kermit vs. QTERM/Kermit Need info on Apple Premium Softcard //e Z80 card Re: CP/M disk formats (was Re: CPM to DOS exchanger) Re: Help needed: Compupro 8/16 running concurrent cp/m Re: PL/I compiler ---------------------------------------------------------------------- Date: Tue, 11 Jun 91 18:10:35 EDT From: Mike Freeman Subject: EXL Output Filename Problem Solved Message-ID: Extract the two lines at the end of this message with your favorite text editor, write them to disk as EXLPAT.HEX and overlay EXL.COM with EXLPAT.HEX via DDT, DDTZ, MLOAD or whatever to produce a patched EXL.COM. This should fix the problem wherein EXL-written disk files whose filetype nominally have less than 3 characters have their last character set to rather than , thus making them inaccessible to other programs. I've tested this out and it works. Plan to upload a EXLPAT.LBR with patch source shortly. -- Mike Freeman K7UIJ -- *****CUT HERE***** :03065300010B0098 :0000000000 *****CUT HERE***** ------------------------------ Date: 11 Jun 91 16:07:51 GMT From: ucrmath!watnxt3!kevin@ucsd.edu (Kevin Lund) Subject: Help needed: Compupro 8/16 running concurrent cp/m Message-ID: <15165@ucrmath.ucr.edu> I'm having a bit of trouble with a Compupro 8/16; maybe somebody can help me... I finally managed to get this thing to boot up, and it's now running concurrent cp/m (and running it pretty well too). Problem is, I have only one boot disk, which gives me the heebie-jeebies. No problem, I have two drives, make a copy right? Well, the copy program fails consistently; as far as I can tell the problem is that it wants the two disks to have the same format (understandable, though it would be nice if it would format them itself...). Now, the disks I want to copy are all double-sided, but all the other 8" disks I have come from my imsai which has single-sided drives and so are formatted accordingly (well, I have a box of blanks but they were pre-formatted...single sided...). So, here's the core of the problem: my format program will not (as far as I can tell) re-format a single sided disk as a double sided. I've tried taking my most vicious magnets to SS disks but to no avail! It's like the computer KNOWS! Any ideas? Also, anybody know where I can get reasonably- priced 8" blanks? Next question (as you can see, I have ccp/m but no manuals...), anybody know what I need to do to make the hard drive bootable? It's on a disk 3 controller and was semi-bootable when I got it so I know it can be done (had to be re- formatted though). I've tried sysgen and a couple other things along those lines with no success. I guess that's it for now..oh yeah one other thing, I tried putting more than 1 meg of ram in but it doesn't seem to recognize it...is this a hard limit or did I just blow the dip switches? Thanks... Kevin Lund (kevin@watnxt3.ucr.edu) ------------------------------ Date: Tue, 11 Jun 91 12:32:07 -0200 From: Georg Wittig Subject: How to decompress "*.?Y?" files? Message-ID: <9106111032.AA03682@gmdzi.gmd.de> Hello, I'm looking for the source code (C or Pascal) of a program that can decompress those ``*.?Y?'' files. I couldn't find such a file on SIMTEL20. Note, I'm not looking for a ``*.COM'' file that does it (I do have that), but for a source code file. Thanks in advance for your help. Yours, -- Georg Wittig GMD-Z1.IT P.O.Box 1240 | "Freedom's just another word D-W-5205 St. Augustin 1 (Germany) | for nothing left to lose" email: wittig@gmdzi.gmd.de | (from "Me and Bobby McGee", telephone: (+49) 2241 14-2294 | Janis Joplin, Kris Kristofferson) ------------------------------ Date: Wed, 12 Jun 91 04:15:38 EDT From: Steve_Graham@ub.cc.umich.edu Subject: MTS/Kermit vs. QTERM/Kermit Message-ID: <9079347@ub.cc.umich.edu> It seems that the trouble I am having with Qterm's Kermit is not entirely Qterm's fault. I managed to use Qterm/Kermit to transfer some files on a local bbs (m-net). However I cannot manage it with MTS, the mainframe system I use here. I have tried everything I can think of to no avail. It just sits there and times out merrily. When I tried to send things to MTS I got from MTS/Kermit the error message, "receive file header: unexpected packet type" If any of you can suggest anything I would surely appreciate it. Thanks. --Steve Graham (sg2@ub.cc.umich.edu) ------------------------------ Date: 12 Jun 91 22:00:26 GMT From: munnari.oz.au!uhccux!uhunix1.uhcc.Hawaii.Edu!tbopp@uunet.uu.net (Thomas T. Bopp) Subject: Need info on Apple Premium Softcard //e Z80 card Message-ID: <13440@uhccux.uhcc.Hawaii.Edu> I am trying to create a qterm overlay for an Apple //e which uses the Microsoft Premium Softcard //e. This is NOT an "original" Softcard; this model has its own 64K and built-in 80 column card. I need to know how to call the ROM bios to read a byte from the Apple's memory, and how to write a byte to the Apple's memory. Unfortunately, we do not have the Programmer's Guide to this card, and nowhere can I find any overlays (for MEX, IMP, MDM7, etc.) that could be used as a starting point. This is a weird card -- it does NOT share Apple memory (with offset), like the original Softcard. If anyone can find this information in the Programmer's Reference, or from any other source, please contact me via email. Any hints appreciated. Thank you. tbopp ------------------------------------------------------------------------------- Tom Bopp INTERNET:tbopp@uhunix.uhcc.hawaii.edu Dept of Chemistry BITNET:tbopp@uhunix University of Hawaii UUCP:{ihnp4,uunet,dcdwest,ucbvax}!ucsd!nosc!uhccux!tbopp Honolulu, HI 96822 VOICE:(808)956-7463 FAX:(808)956-9508 -- ------------------------------------------------------------------------------- Tom Bopp INTERNET:tbopp@uhunix.uhcc.hawaii.edu Dept of Chemistry BITNET:tbopp@uhunix University of Hawaii UUCP:{ihnp4,uunet,dcdwest,ucbvax}!ucsd!nosc!uhccux!tbopp ------------------------------ Date: 12 Jun 91 11:53:16 GMT From: comp.vuw.ac.nz!cavebbs!lesley@uunet.uu.net (Lesley Walker) Subject: Re: CP/M disk formats (was Re: CPM to DOS exchanger) Message-ID: <1991Jun12.115316.21739@cavebbs.gen.nz> >bill@bilver.uucp (Bill Vermillion) writes: > >>Well I know of at least 1 other CPM machine that used 3.5" disks. >>Sony. In article ns@csd.cri.dk (Nick Sandru) writes: >Another one is Commodore 128. It uses 3.5" disks with the Commodore 1581 >disk drive (capacity: 796 Kbytes). My Amstrad PCW has a 3.5" drive. It's not standard, but the conversion is being marketed quite heavily in the UK, as far as I can tell. -- The Leather Goddess - DoD#258 * lesley@cavebbs.gen.nz Wellington, NZ. Yamaha XV1000 * Lesley.Walker@bbs.actrix.gen.nz "Strange what desire will make foolish people do" - Chris Isaaks ------------------------------ Date: 12 Jun 91 16:24:52 GMT From: cis.ohio-state.edu!zaphod.mps.ohio-state.edu!hobbes.physics.uiowa.edu!iowasp.physics.uiowa.edu!syswtr@ucbvax.Berkeley.EDU Subject: Re: Help needed: Compupro 8/16 running concurrent cp/m Message-ID: <1991Jun12.112452.1@iowasp.physics.uiowa.edu> In article <15165@ucrmath.ucr.edu>, kevin@watnxt3.ucr.edu (Kevin Lund) writes: > I'm having a bit of trouble with a Compupro 8/16; maybe somebody can help me... > I want to copy are all double-sided, but all the other 8" disks I have come > So, here's the core of the problem: my format program will not (as far as I > can tell) re-format a single sided disk as a double sided. I've tried taking 8" drives know... The index hole is located differently on a double sided diskette. Your drive has 2 index detectors and can tell when you insert a single sided diskette. Willy ------------------------------ Date: 11 Jun 91 04:03:30 GMT From: astroatc!nicmad!madnix!ruth!rat@speedy.wisc.edu (David Douthitt) Subject: Re: PL/I compiler Message-ID: slsw2@cc.usu.edu writes: > Digital Research made a PL/I compiler for CP/M. Don't know how full-featured > it was (I've never used it, and never used another PL/I compiler that I could > compare it to), but one of the guys here swears by it. > > Don't know where you'd find a copy in this day and age, though. Isn't that really PL/M? Of course, that might be all that's needed. PL/M is PL/I for [M]icros. Anyone got a handle on what PL/C was supposed to be? Are there any PD/Shareware PL/x compilers for MSDOS or CP/M? Would be neat to play with... ------------------------------ End of INFO-CPM Digest V91 Issue #110 ************************************* 13-Jun-91 22:20:43-MDT,9676;000000000000 Return-Path: Date: Thu, 13 Jun 91 22:15:25 MDT From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V91 #111 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <910613221525.V91N111@WSMR-SIMTEL20.ARMY.MIL> INFO-CPM Digest Thu, 13 Jun 91 Volume 91 : Issue 111 Today's Topics: DECUF10.ARK - Yet another uudecoder, TP 3.0 with source EXLPAT.LBR - Patch to EXL.COM to fix output filename bug Kaypro 10 Wanted Need some help with PINOUTS PL/I and PL/M and PL/?? Re: Help needed: Compupro 8/16 running concurrent cp/m (2 msgs) Re: Microbee Qterm progress report ?? Searching for CDC721 boot disk ---------------------------------------------------------------------- Date: Thu, 13 Jun 91 08:48 MET From: "W.J.M. Nelis, NLR-NOP" Subject: DECUF10.ARK - Yet another uudecoder, TP 3.0 with source Summary: Reposted by Keith Petersen I have uploaded to SIMTEL20: pd2: DECUF10.ARK Yet another uudecoder, TP 3.0 with source W.J.M. Nelis NELIS@NLR.nl ------------------------------ Date: Tue, 11 Jun 91 18:26:48 EDT From: Mike Freeman Subject: EXLPAT.LBR - Patch to EXL.COM to fix output filename bug Summary: Reposted by Keith Petersen Message-ID: I have uploaded to SIMTEL20: pd2: EXLPAT.LBR Patch to EXL.COM to fix output filename bug The fix contained in EXLPAT.LBR fixes a bug in EXL.COM which rendered files written by EXL whose filetype had less than 3 characters (e.g., ".Z" files) inaccessible to other programs. Mike Freeman freeman@watsun.cc.columbia.edu ------------------------------ Date: 12 Jun 91 19:57:32 GMT From: aurs01!luce@uunet.uu.net (J. Luce) Subject: Kaypro 10 Wanted Message-ID: <59916@aurs01.UUCP> A friend of mine has fallen in love with my K10 (kinky, huh?) but I won't let him have mine. Anyone know of one for sale with docs and s/w in about the $150 range? E-Mail me at one of the following addresses. If you use uunet, it might not make it here :) Also, a Televideo with HD would be a second choice... Thanks. ------------------------------------------------------------------- John Luce | Life is the leading cause of death Alcatel Network Systems | ----------------------------------------- Raleigh, NC | Standard Disclaimer Applies 919-850-6787 | Mail? Here? Try aurs01!aurw46!luce@mcnc.org | or ...!mcnc!aurgate!luce -------------------------------- or John.Luce@f130.n151.z1.fidonet.org ------------------------------ Date: 13 Jun 91 05:02:49 GMT From: cis.ohio-state.edu!zaphod.mps.ohio-state.edu!swrinde!mips!cs.uoregon.edu!ogicse!plains!tericks%plains.NoDak.edu@ucbvax.Berkeley.EDU (Terry Erickson) Subject: Need some help with PINOUTS Message-ID: <10824@plains.NoDak.edu> Greetings, I have a question about a NEC APC. I am trying to hook up a modem to that computer, BUT its port on the back is no normal Serial Port, it looks more like the Centronics Parallel Printer port (Cent 36 I think) instead of a DB25. And I seemed to have misplaced my manuals for the pinouts on that type of Serial Port, could anyone give me some assistance?? That way, with a little help from a Jumper Box and a normal Parallel Printer cable, I could have Modem Communications. Any and all comments are welcomed, Terry Erickson ------------------------------ Date: Wed, 12 Jun 1991 21:15:38 -0400 (EDT) From: John C Klensin Subject: PL/I and PL/M and PL/?? Message-ID: <676775738.965050.KLENSIN@INFOODS.MIT.EDU> David Douthitt writes... >Isn't that really PL/M? Of course, that might be all that's needed. >PL/M is PL/I for [M]icros. Well, no. More like "Programming Language / Micros". It shares some syntax with PL/I, but not even enough to be considered a dialect. Digital Research "PL/I" (not to be confused with PL/I) really is a dialect. >Anyone got a handle on what PL/C was supposed to be? The appearance of PL/I in the marketplace, and its tenure as the teaching language of choice, was associated with a largish collection of PL/I dialects and PL/I-like languages designed for various purposes or to illustrate various points. PL/C was a pedagogical subset that came out of Cornell (ok, now guess what the "C" stands for). It lacked, among other things, BASED variables and pointers, which put in into the class known at the time as "FORTRAN with semicolons" rather than serious PL/I. A certain large computer manufacturer had a variation for systems programming work (more control of registers, etc.) that, for a while, was called PL/S but which was never released to customers and, as far as I know, never officially existed. There was also, if I recollect correctly (it has been a LONG time, he says, pulling at his white beard), one collection of PL/I dialects and variants that were not named PL/x but SP/1 ... SP/K. The came, if I recall, out of Toronto. If one could find the sources somewhere, it might be pretty easy to put them up in a micro environment. --john Klensin@INFOODS.MIT.EDU ------------------------------ Date: 13 Jun 91 21:45:02 GMT From: baron!baron!pnet07!donm@nosc.mil (Don Maslin) Subject: Re: Help needed: Compupro 8/16 running concurrent cp/m Message-ID: <1991Jun13.214502.9446@baron.uucp> kevin@watnxt3.ucr.edu (Kevin Lund) writes: >So, here's the core of the problem: my format program will not (as far as I >can tell) re-format a single sided disk as a double sided. I've tried taking >my most vicious magnets to SS disks but to no avail! It's like the >computer KNOWS! Any ideas? Also, anybody know where I can get reasonably- >priced 8" blanks? > Yes, it *does* know! If you will compare the double sided disks with the single sided ones you will see that the sector 0 hole in the jacket for the double sided one is at about 1 o'clock, whereas, the single sided one is at about 12:30. Make a paper template of the DS hole location and mark it on the SS jacket - don't forget the back side too - and with an old fashioned hand paper punch a new hole in one side of the jacket. Turn it over and do the second. Voila! a double sided disk. NOTE!!!! Be very careful that you don't scratch, fold, spindle, or mutilate the disk itself, AND that you DO NOT punch a new hole in that also. Just in the jacket, please. Back before double sided drives were at all common, they used to make 'flippy's' by a variation of that technique, so that both sides were accessible. Keeper of the CP/M System Disk | UUCP: {nosc ucsd crash ncr-sd}!pnet07!donm Archives for the Dino(saur)SIG | ARPA: simasd!pnet07!donm@nosc.mil - San Diego Computer Society - | INET: donm@pnet07.cts.com ------------------------------ Date: 14 Jun 91 03:17:56 GMT From: prism!mailer.cc.fsu.edu!loligo!swanson@gatech.edu (Bob Swanson) Subject: Re: Help needed: Compupro 8/16 running concurrent cp/m Message-ID: <1991Jun14.031756.12358@mailer.cc.fsu.edu> Been some time since I played with 8" disks, but I seem to recall that the sector index hole is in a different spot on double sided disks. That's how your box "knows" it's being fed single sided disks. ------------------------------ Date: 13 Jun 91 02:50:34 GMT From: munnari.oz.au!bruce!monu0.cc.monash.edu.au!monu1.cc.monash.edu.au!rjl@uunet.uu.net ( r lang) Subject: Re: Microbee Qterm progress report ?? Message-ID: <1991Jun13.025034.18949@monu1.cc.monash.edu.au> In article <834@spam.ua.oz>, dcook@spam.ua.oz (David Cook) writes: > > Well, I haven't heard any replies to my earlier followup > about QTerm on Microbee (CP/M) computers, so I decided to post > this. My question : > Has anyone got patches/working executable for QTerm on a Microbee system ? I have never seen QTerm, but Kermit-80 v4.11 does have a Microbee version. > If not, has anyone got any information about programming I/O on > a Microbee, or can anyone recommend any books on the subject. Get a Microbee technical manual. > (If I have to I'll try to remember some Z80 assembler, and > write the QTerm patches myself, but I have no information > on using the PIO (or is it UART? - shows how little docs I have :) > in the Microbee ) The microbee serial port is 4 bits of the PIO - TX, RX, CTS and one other non-standard one. The other PIO bits are used for tape in, tape out, tape on/off, speaker. Programming serial routines is a real pain. Input is interrupt driven so that you don't lose characters when the keyboard is being scanned or the video screen scrolled. -- Russell Lang Email: rjl@monu1.cc.monash.edu.au Phone: (03) 565 3460 Department of Electrical and Computer Systems Engineering Monash University, Australia ------------------------------ Date: 12 Jun 91 02:56:18 GMT From: mcsun!news.funet.fi!funic!nntp.hut.fi!cs.hut.fi!arl@uunet.uu.net (Ari Lemmke) Subject: Searching for CDC721 boot disk Message-ID: I'm trying to find the boot disk for CDC 721 Display Terminal. arl ------------------------------ End of INFO-CPM Digest V91 Issue #111 ************************************* 15-Jun-91 06:20:02-MDT,12767;000000000000 Return-Path: Date: Sat, 15 Jun 91 06:15:46 MDT From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V91 #112 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <910615061546.V91N112@WSMR-SIMTEL20.ARMY.MIL> INFO-CPM Digest Sat, 15 Jun 91 Volume 91 : Issue 112 Today's Topics: Help on Kings Quest 5 QTERM/KERMIT Re: Conversion form CP/M to DOS Re: CP/M disk formats (was Re: CPM to DOS exchanger) Re: Help needed: Compupro 8/16 running concurrent cp/m Re: Need some help with PINOUTS ---------------------------------------------------------------------- Date: 12 Jun 91 15:47:24 GMT From: nuchat!farwest!Uucp@uunet.uu.net (ANDY CRAWFORD) Subject: Help on Kings Quest 5 Message-ID: <676755540.0@farwest.FidoNet> I've been playing Kings Quest 5, and I'm currently stuck in the witch's forest. I know that to get out it has something to do with the rock creature and the honey, but I'm not sure how. If ANYONE can help, PLEASE tell me. Thanx, Andy Crawford * Origin: The Black Box RCP/M MSBBS, 713-480-2686 HST/V32/V42bis (106/601) ------------------------------ Date: Fri, 14 Jun 91 14:27:54 EDT From: Steve_Graham@ub.cc.umich.edu Subject: QTERM/KERMIT Message-ID: <9107558@ub.cc.umich.edu> I am still not able to get QTERM's KERMIT to talk to my local mainframe's (MTS) kermit. Any ideas? Setting parity, file type, packet length don't seem to do it. MTS sometimes give "unexpected packet type" messages, or spits out a "d:" at the bottom right of the screen, otherwise nothing but timeout errors. And they are offset on the screen by one line from their labels, due to that at the bottom of the screen. sg2@ub.cc.umich.edu ------------------------------ Date: 14 Jun 91 03:10:14 GMT From: milton!sumax!polari!rwing!fnx!del@beaver.cs.washington.edu (Dag Erik Lindberg) Subject: Re: Conversion form CP/M to DOS Message-ID: <1054@fnx.UUCP> In article <5B06020E2B280175-SCTNVE*SonicDruid@sctnve.sct.peachnet.edu> SonicDruid@SCTNVE.SCT.PEACHNET.EDU writes: > Yes, it is possible to run DOS on your machine since you have a 8086 True. >8086 processor as opposed to the 8088 the machine isn't totally 100% >IBM compatible, Bogus! An 8086 is indistinguishable from an 8088 for all intents and purposes. Saying an 8086 isn't an 8088 and therefore not 100% IBM compatible is equivalent to saying that an 80286 or 80386 is not an 8088 so therefor you are not 100% IBM compatible. >but it runs some version of DOS written for the machine, >but reading other DOS disks (IBM, etc.) is not a problem. This is what may cause a problem. The actual compatibility issues in PC-clone machines are related to hardware addressing and the BIOS software. If hardware is different, or the BIOS is significantly different, then there probably would have to be a custom version of MSDOS for the beast. Note that the CPU has nothing to do with it (as long as it isn't a 6809 :-) -- del AKA Erik Lindberg uunet!pilchuck!fnx!del Who is John Galt? ------------------------------ Date: 2 Jun 91 19:40:37 GMT From: motcsd!mcdcup!mcdhup!mcdchg!laidbak!amiganet!austral!rrezaian@apple.com (Russell Rezaian) Subject: Re: CP/M disk formats (was Re: CPM to DOS exchanger) Message-ID: In article <822@spam.ua.oz> dcook@spam.ua.oz (David Cook) writes: > > While on the subject of disk formats, are there any programs >that will read Microbee 3.5" CP/M disks. As far as I am aware, the >Microbee (an Australian designed and built CP/M machine, which also >had some graphics support, until the company went broke :-( ) >is the only CP/M machine that uses 3.5" disks, which hold 390K. [...] Not really very helpful, but... There are a few other CP/ computers that use 3.5 inch drives. We had a lot of discussion about the Epson Geneva a little while ago. That strange beast not only used 3.5 inch dirves it also used Micro Cassttes, and roms... If I remember right it also used a 390k format. Yet one more CP/M computer that uses 3.5inch drives is the painfully slow Commodore 128. It ran CP/M+ on a Z80, would read Kaypro, Osborne, and a few other 5.25 inch formats, and also was able to use a proprietary 800k 3.5inch format. Unfortuantly the drive interface was a rather slow serial bus, so the machine was mostly useless. If you have access to one it shouldn't be too hard I don't think to teach it to read the Microbee format (if you have a description of it) but you might find it a little hard to find a 128, and the necessary 1581 drive. Good luck! (Me, I stick with my Kaypro and my OSMs, no 3.5, but then again not as much waiting :-) -- Russell Rezaian | rrezaian@austral.chi.il.us "What is the strongest cure? | rrezaian@amiganet.chi.il.us -- Victory." Nietzsche. | Russell Rezaian via Fido 1:115/918 ------------------------------ Date: 12 Jun 91 22:06:29 GMT From: csus.edu!csusac!sactoh0!ijpc!ianj@decwrl.dec.com (Ian Justman) Subject: Re: Help needed: Compupro 8/16 running concurrent cp/m Message-ID: kevin@watnxt3.ucr.edu (Kevin Lund) writes: > I'm having a bit of trouble with a Compupro 8/16; maybe somebody can help me. I can. So can Marc Wilson (mwilson@crash.cts.com) > I finally managed to get this thing to boot up, and it's now running concurre > cp/m (and running it pretty well too). Problem is, I have only one boot disk > which gives me the heebie-jeebies. Haven't we all on all of our computers? :-) > No problem, I have two drives, make a copy > right? Well, the copy program fails consistently; as far as I can tell the > problem is that it wants the two disks to have the same format (understandabl > though it would be nice if it would format them itself...). I believe the copy program WILL format a blank, if it deems it necessary. > Now, the disks > I want to copy are all double-sided, but all the other 8" disks I have come > from my imsai which has single-sided drives and so are formatted accordingly > (well, I have a box of blanks but they were pre-formatted...single sided...). > > So, here's the core of the problem: my format program will not (as far as I > can tell) re-format a single sided disk as a double sided. I've tried taking > my most vicious magnets to SS disks but to no avail! It's like the > computer KNOWS! Any ideas? Also, anybody know where I can get reasonably- > priced 8" blanks? That's because your computer DOES know the difference between a SS and a DS diskette. (Actually, the drive knows better than the computer does because there are TWO index sensors on most, if not all, DS drives.) If you put a SS and a DS disk label side up side-by-side, you'll notice that the index holes are in different positions. A SS disk will have its hole about a quarter inch to the right of an imaginary line you could draw down the center parallel the media head access cutout. A DS disk will have its hole about a 3/4" from said imaginary line. Translated: you're shit out of luck trying to format those SS as DS disks. Don't try to punch hole in them either because it doesn't work. It will work with my Dynabyte, but not my CompuPro. > Next question (as you can see, I have ccp/m but no manuals...), anybody know > what I need to do to make the hard drive bootable? It's on a disk 3 controll > and was semi-bootable when I got it so I know it can be done (had to be re- > formatted though). I've tried sysgen and a couple other things along those > lines with no success. How many masters do you have? On top of that, what version of CDOS (I prefer it over CCP/M) do you have? If you have more than one, there should be several files, nameds depending on version, which are loaders for specific controllers/drive types. If you have earlier than 5.0, there will be loaders for whether you use a System Support 1 or a PC Video card as a console, and whether you use 5 1/4" or 8" floppy or a Disk 2 or a Disk 3 as a boot controller (Disk 2 and Disk 3 are hard drive controllers, with the Disk 2 useable on SA-4000 (I think) interfaces, and the Disk 3 with the ST-506 interface.) > I guess that's it for now..oh yeah one other thing, I tried putting more than > 1 meg of ram in but it doesn't seem to recognize it...is this a hard limit > or did I just blow the dip switches? Thanks... Nothing to do with the dipswitches. Even if you're using a CPU 286 (like I do), you're still locked down to a 1 meg limit. Those switches on your RAM cards will let you put up to 16 megs of memory online. BTW, are you using RAM 21 or RAM 22 memory boards? Just kinda curious. If you have any more questions, gimme a call at (916) 344-5360 and I'll try to help ya. ------------------------------ Date: 14 Jun 91 05:05:26 GMT From: baron!baron!pnet07!donm@nosc.mil (Don Maslin) Subject: Re: Need some help with PINOUTS Message-ID: <1991Jun14.050526.13975@baron.uucp> tericks@plains.NoDak.edu (Terry Erickson) writes: > I have a question about a NEC APC. > > I am trying to hook up a modem to that computer, BUT its port on the >back is no normal Serial Port, it looks more like the Centronics Parallel >Printer port (Cent 36 I think) instead of a DB25. And I seemed to have >misplaced my manuals for the pinouts on that type of Serial Port, could >anyone give me some assistance?? > That way, with a little help from a Jumper Box and a normal Parallel >Printer cable, I could have Modem Communications. Following is a tabulation of: Table 3-20 Serial I/O Connectors Pin Assignments Pin # Pin # Pin # Signal at A at B at C Remarks ----------------------------------------------------------------- Frame Ground 1 1 1 SD 2 2 3 Send Data RD 3 3 5 Receive Data RS 4 4 7 Request to Send CS 5 5 9 Clear to Send DR 5 5 11 Data Set Ready Signal Ground 7 7 13 CD 8 8 15 --------------------------------------------------- 9 9 17 No Signal 10 10 19 11 11 21 12 12 23 13 13 25 14 19 2 --------------------------------------------------- ST2 15 20 4 Transmit Clock (TxC) --------------------------------------------------- 16 21 6 --------------------------------------------------- RT 17 22 8 Receive Clock --------------------------------------------------- 18 23 10 19 24 12 No Signal --------------------------------------------------- ER 20 25 14 Data Terminal Ready --------------------------------------------------- 21 26 16 22 27 18 No Signal 23 28 20 --------------------------------------------------- ST1 24 29 22 Transmit Clock (RxC) --------------------------------------------------- 25 30 24 No Signal --------------------------------------------------- NOTE: 'A' is at the modem connector 'B' is at the back panel connector 'C' is at the processor board header I infer that the serial connector is the right hand one, but I'm not sure. Hope this helps. - don Keeper of the CP/M System Disk | UUCP: {nosc ucsd crash ncr-sd}!pnet07!donm Archives for the Dino(saur)SIG | ARPA: simasd!pnet07!donm@nosc.mil - San Diego Computer Society - | INET: donm@pnet07.cts.com ------------------------------ End of INFO-CPM Digest V91 Issue #112 ************************************* 16-Jun-91 22:21:41-MDT,9324;000000000000 Return-Path: Date: Sun, 16 Jun 91 22:15:10 MDT From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V91 #113 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <910616221511.V91N113@WSMR-SIMTEL20.ARMY.MIL> INFO-CPM Digest Sun, 16 Jun 91 Volume 91 : Issue 113 Today's Topics: Assembling & linking .MAC files ... Info needed on Zenith Z100 kermit for Actrix cp/m machine Microbee terminal programs and so on ... Re: CP/M disk formats (was Re: CPM to DOS exchanger) Re: Help needed: Compupro 8/16 running concurrent cp/m ---------------------------------------------------------------------- Date: 16 Jun 91 15:35:27 GMT From: munnari.oz.au!yoyo.aarnet.edu.au!sirius.ucs.adelaide.edu.au!spam!dcook@tcgould.tn.cornell.edu (David Cook) Subject: Assembling & linking .MAC files ... Message-ID: <846@spam.ua.oz> Hello CP/Mers, I grabbed Small-C from wuarchive.wustl.edu (which mirrors SIMTEL20), and it seems to run ok. My problem now is that it generates .MAC files, and I'm not sure how to assemble these (well, if I had DRI's MAC or RMAC I'd probably know, but I don't :) I do have M80 and L80 ... I would appreciate general information on those programs PS: to all those who posted or emailed about my previous questions : I am in the process of summarizing ... Real Soon Now :-) (please email replies to this question to dcook@spam.adelaide.edu.au ) ------------------------------ Date: 13 Jun 91 22:33:48 GMT From: bobsbox!gnat!cmcewen@rutgers.edu (Chris McEwen) Subject: Info needed on Zenith Z100 Message-ID: <2i5H41w164w@gnat.rent.com> >>Does anyone have any documentation on the (Z100)? You might be interested in a newsletter that is published for Z100 owners. Cost is $24/year (US). Write to: Z100 LifeLine, 3620 Amazon Drive, New Port Richey FL 34655. The editor is Paul Herman. ------------------------------ Date: 16 Jun 91 07:31:17 GMT From: netcomsv!dmitry@decwrl.dec.com (Dmitry Grinauz) Subject: kermit for Actrix cp/m machine Message-ID: <1991Jun16.073117.9326@netcom.COM> Hi, everyone! I've just recently got access to this newsgroup, and enjoy it a lot. I have an odd cp/m machine, called Actrix DS, that I use for word processing. The thing is a luggable (~30 lbs), has a built-in epson mx printer, modem, vdt and 2 5 1/4 ds floppies. It is extremely robust and reliable. During 89 quake it fell of the desk and landed on it's "head", and still kept on working. I have only one problem with it: it does not have a decent vt100 emulator. I've tried qterm and imp, but both of these programs use an exter- nal modem through a non-interrupt driven serial port, which means that it looses characters at 1200 baud. I've heard that there was a version of kermit for that thing that used the internal 1200 baud modem, which is interrupt driven. Anyone got any hints? I really love that ancient thing, and it bogs me that I have to get on one of those new computers (pc) whenever I need to call a remote site that uses vt100 emulation. If anyone knows what I am talking about, please let me know. I've talked to the service dept while they were still in business (about a year ago), and they told me they had the source, but lost it ;-(. Dmitry ------------------------------ Date: 17 Jun 91 03:07:33 GMT From: cis.ohio-state.edu!zaphod.mps.ohio-state.edu!swrinde!elroy.jpl.nasa.gov!news.arc.nasa.gov!uhccux!munnari.oz.au!uniwa!cc.curtin.edu.au!nmurrayr@ucbvax.Berkeley.EDU (Ron Murray) Subject: Microbee terminal programs and so on ... Message-ID: <1991Jun17.110734.8723@cc.curtin.edu.au> In article <1991Jun13.025034.18949@monu1.cc.monash.edu.au>, rjl@monu1.cc.monash.edu.au ( r lang) writes: > In article <834@spam.ua.oz>, dcook@spam.ua.oz (David Cook) writes: >> >> Well, I haven't heard any replies to my earlier followup >> about QTerm on Microbee (CP/M) computers, so I decided to post >> this. My question : >> Has anyone got patches/working executable for QTerm on a Microbee system ? > I have never seen QTerm, but Kermit-80 v4.11 does have a Microbee version. > >> If not, has anyone got any information about programming I/O on >> a Microbee, or can anyone recommend any books on the subject. > Get a Microbee technical manual. > >> (If I have to I'll try to remember some Z80 assembler, and >> write the QTerm patches myself, but I have no information >> on using the PIO (or is it UART? - shows how little docs I have :) >> in the Microbee ) > The microbee serial port is 4 bits of the PIO - TX, RX, CTS and one > other non-standard one. The other PIO bits are used for tape in, > tape out, tape on/off, speaker. Programming serial routines is a real pain. > Input is interrupt driven so that you don't lose characters when the > keyboard is being scanned or the video screen scrolled. > -- If you have one of the later coreboards (8342- I think, but don't quote me), you'd be better off installing an 8530 and using that. This gets you two hardware serial ports and, even though the 8530 is a real bitch to program, it's lots better than the software UART. Don't know about QTERM, but there's a ZMP overlay for this configuration. .....Ron -- =============================================================================== Internet: Murray_RJ@cc.curtin.edu.au | "The Universe is so Bitnet: Murray_RJ%cc.curtin.edu.au@cunyvm.bitnet | utterly disorganised UUCP : uunet!munnari.oz!cc.curtin.edu.au!Murray_RJ | that it can only have Amateur Packet Radio: VK6ZJM@VK6BBS.#WA.AUS.OC | been written in Pascal" TCP/IP: 44.136.204.14, 44.136.204.19 | -- The Phantom Waffler =============================================================================== ------------------------------ Date: 15 Jun 91 19:50:07 GMT From: cis.ohio-state.edu!zaphod.mps.ohio-state.edu!swrinde!cs.utexas.edu!ut-emx!austex!roadhog@ucbvax.Berkeley.EDU (Lindsay Haisley) Subject: Re: CP/M disk formats (was Re: CPM to DOS exchanger) Message-ID: <90LL41w163w@austex> > > > Clarence Wilkerson writes: > > If the 3.5" disk is physically compatible with ibm pc type > > drives, then you can hack a set of parameter tables to match > > them and use 22disk, a shareware program that runs on a PC. > I have tried this and it didn't work. > I have two theories, neither has been tested. > 1. Microbee disks have 10 sectors and the intersector space > is shorter than specified in the Western Digital data sheet. > The PC may not like this short space. > 2. I think (but am not sure) that the sector header information > is marked side 0 for both sides of the disk. > If the PC insists that side 1 is marked as side 1 ... > > > My guess would be that the disks are single sided, double > > density with either 5 1k sectors per track or 10 512btye > > sectors per track, with first 2 tracks reserved for system. > 3.5", 10 512byte sectors per track, single sided, 390k > 3.5", 10 512byte sectors per track, double sided, 780k > In both formats tracks 0 and 1 (both sides) are reserved for system. > I have the correct DPB entries and skew table if anyone wants them. Sydex, the people who created 22disk, also have a product out called AnaDisk which does a fairly thorough and intelligent analysis of >>any<< disk format, CP/M, DOS, or otherwise. Contact Sydex (see the 22disk reg. info) for a shareware sampler containing the program. The registered version of 22disk has a pretty good facility for creating your own disk format table, and the instruction which come with the registered version give fairly complete directions for the process. Lindsay Haisley "Everything works if you let it!" --- Travis J. Redfish ++++++++++++++++++++++++++++++ uucp: austex!roadhog@emx.utexas.edu BBS: 512-259-1261 (Znode 77 - aka - Kaypro Club of Austin) ------------------------------ Date: 15 Jun 91 15:13:59 GMT From: bobsbox!gnat!azog@rutgers.edu (Billy D'Augustine) Subject: Re: Help needed: Compupro 8/16 running concurrent cp/m Message-ID: <1H0k42w164w@gnat.rent.com> kevin@watnxt3.ucr.edu (Kevin Lund) writes: > So, here's the core of the problem: my format program will not (as far as I > can tell) re-format a single sided disk as a double sided. I've tried taking > my most vicious magnets to SS disks but to no avail! It's like the > computer KNOWS! Any ideas? Also, anybody know where I can get reasonably- > priced 8" blanks? > > > Kevin Lund (kevin@watnxt3.ucr.edu) Well, the computer does know if it is a DS or SS disk. On 8" disks, its a hardware feature. Look at the index hole, and youll see that the hole is shifted a few degrees between SS and DS disks. If your feeling brave, you can use a hole punch to change it :-) Try Inmac, or any of those mail order companys, they usually still sell 8" diskettes... ------------------------------ End of INFO-CPM Digest V91 Issue #113 ************************************* 18-Jun-91 02:26:26-MDT,8869;000000000000 Mail-From: W8SDZ created at 18-Jun-91 02:16:13 Return-Path: Date: Tue, 18 Jun 91 02:16:13 MDT From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V91 #114 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <910618021613.V91N114@WSMR-SIMTEL20.ARMY.MIL> INFO-CPM Digest Tue, 18 Jun 91 Volume 91 : Issue 114 Today's Topics: C compiler for Cp/M or MP/M Kermit-80 for the ACtrix L80 and M80 M80 ... Modified Telcon Zorba Questions QTERM/MTS Kermit ---------------------------------------------------------------------- Date: 17 Jun 91 14:10:34 GMT From: zephyr.ens.tek.com!tektronix!percy!m2xenix!quagga!ucthpx!uctcs!ken@uunet.uu.net (Ken McGregor) Subject: C compiler for Cp/M or MP/M Message-ID: The heading says it all. Does anyone know if such a beastie exists either pd or commercially. -- Ken MacGregor ken@cs.uct.ac.za Computer Science ken%uctcs%quagga@uunet.uu.net University of Cape Town ...uunet!{m2xenix!quagga,ddsw1!olsa99}!uctcs!ken ------------------------------ Date: Mon, 17 Jun 91 13:24:15 EDT From: Mike Freeman Subject: Kermit-80 for the ACtrix Message-ID: In article <1991Jun16.073117.9326@netcom.COM>, Dmitry Grinauz writes: >Hi, everyone! >I've just recently got access to this newsgroup, and enjoy it a lot. I have >an odd cp/m machine, called Actrix DS, that I use for word processing. The >thing is a luggable (~30 lbs), has a built-in epson mx printer, modem, vdt >and 2 5 1/4 ds floppies. It is extremely robust and reliable. During 89 >quake it fell of the desk and landed on it's "head", and still kept on >working. I have only one problem with it: it does not have a decent vt100 >emulator. I've tried qterm and imp, but both of these programs use an exter- >nal modem through a non-interrupt driven serial port, which means that it >looses characters at 1200 baud. I've heard that there was a version of >kermit for that thing that used the internal 1200 baud modem, which is >interrupt driven. Anyone got any hints? I really love that ancient thing, >and it bogs me that I have to get on one of those new computers (pc) whenever >I need to call a remote site that uses vt100 emulation. If anyone knows >what I am talking about, please let me know. I've talked to the service >dept while they were still in business (about a year ago), and they told me >they had the source, but lost it ;-(. There is a version of Columbia's CP/M Kermit for the ACtrix but I'm afraid it's not what you want. Somewhere, the rumor got started that Kermit-80 has VT-100 emulation. Let's be very clear: Columbia's Kermit-80 does *****NOT***** have VT-100 emulation; it only emulates a VT-52/H-19 at present. If this would be of use, you can download two hex files from Columbia's WATSUN machine and MLOAD them together to make a running Kermit-80. Hope this helps. -- Mike Freeman K7UIJ -- P.S. If your machine survived Loma Rieta and a dance upon its head, you've got a helluva rig there. Wish more computer manufacturers would take the hint and make rugged machines (see the Info-hams Digest)! ------------------------------ Date: Mon, 17 Jun 91 13:20:15 EDT From: Mike Freeman Subject: L80 and M80 Message-ID: In article <846@spam.ua.oz>, David Cook writes: >Hello CP/Mers, > I grabbed Small-C from wuarchive.wustl.edu (which mirrors SIMTEL20), >and it seems to run ok. My problem now is that it generates .MAC >files, and I'm not sure how to assemble these >(well, if I had DRI's MAC or RMAC I'd probably know, but I don't :) >I do have M80 and L80 ... >I would appreciate general information on those programs Small-C **does** produce files that are to be compiled with M80 and linked with L80 (at least Small-C from SMC211OB.LBR does). The process goes somethine like this, assuming you've created file.C: A>CC file -O A>M80 file ;M80 reads file.MAC A>L80 file,CLIB/S,file/N/E ;L80 reads file.REL and the C library, ;makes file.COM Look for a file L80-M80.LBR on your system; it has (somewhat cursory) documentation for l80/M80. If you can't get it, I can send it via E-mail, UUENCODEd. -- Mike K7UIJ -- ------------------------------ Date: 17 Jun 91 14:01:30 GMT From: cis.ohio-state.edu!zaphod.mps.ohio-state.edu!caen!spool.mu.edu!munnari.oz.au!yoyo.aarnet.edu.au!sirius.ucs.adelaide.edu.au!spam!dcook@ucbvax.Berkeley.EDU (David Cook) Subject: M80 ... Message-ID: <851@spam.ua.oz> Well, I now have Small-C, and it seems to compile things OK, the only problem is, my copy of M80 is corrupt - I tried assembling a test program (which clears the screen), but it gave a 'BDOS error on P: Select' .... (I had a *big* problem with the disk I initially got a copy of M80 (& L80) on - after a spontaneous reboot, I found that half the directory entries had been copied onto the other half !! Needless to say, it was a late night (early morning ) before I had even a hint of order about the disk (thank goodness the Microbee has M/L monitor in ROM that can also read/write disk (given track and sector numbers ... I have a question about this - see below ) ) ) Anyway, I would appreciate it if someone could send M80.COM and L80.COM (preferably uuencoded) to dcook@spam.adelaide.edu.au ... My question about track/sector numbers is: how do I map the numbers in the directory entry onto physical track/sector numbers ? (on a Microbee, CP/M 2.2, ZCPR ) Thanks in advance, David T Cook | e-mail: dcook@spam.adelaide.edu.au | Phone: +61 8 228 5709 Assistant Computer Manager, Stats, Pure and Applied Maths LMG, Adelaide Uni "The wonderful thing about USENET is that anyone can express their opinion." "The worrying thing is that they _do_." ------------------------------ Date: Mon, 17 Jun 91 14:29:40 EDT From: Mike Freeman Subject: Modified Telcon Zorba Questions Message-ID: Around 1982-1984, a company known as AVOS, Inc. modified first the Osborne I and then the Telcon Zorba for screen-reading via speech synthesis for use by the blind. At one time, there was an AVOS Blind User's Group. I am certain it no longer exists since AVOS went under years ago. If any modified Zorba users (besides myself, of course) read this newsgroup, I've got questions for them: (1) has anyone else encountered incorrect disk transfers with AVOS BACKUP program, written by Donald Krantz? I have encountered files with altered CRCs (from CRCK) in the middle of a transferred disk (specifically, M80.COM). My copies of BACKUP have a CRCK44 generated CRC of 886E. (I'm now using CFU from CPYFSTU.LBR plus SGEN/SYSGEN for the system). (2) Does anyone have the source to AVOS' Zorba terminal program STERM.COM? I'd like to see how they did their comm I/O and I might be persuaded to upgrade it to handle XMODEM-CRC, XMODEM-1K and True Ymodem protocols. BTW, I now have a modified BIOS that doesn't destroy the index registers X and Y. Thanks in advance. -- Mike Freeman K7UIJ -- P.S. CFU works fine. ------------------------------ Date: Mon, 17 Jun 91 12:30:55 EDT From: Mike Freeman Subject: QTERM/MTS Kermit Message-ID: In article <9107558@ub.cc.umich.edu>, Steve Graham writes: >I am still not able to get QTERM's KERMIT to talk to my local mainframe's >(MTS) kermit. Any ideas? Setting parity, file type, packet length >don't seem to do it. MTS sometimes give "unexpected packet type" messages, >or spits out a "d:" at the bottom right of the screen, otherwise nothing >but timeout errors. And they are offset on the screen by one line from >their labels, due to that at the bottom of the screen. I corresponded with Frank da Cruz (One of Columbia's Kermit gurus) regarding this problem and he says that it's likely the problem is with MTS-Kermit. Someone once told him that MTS-Kermit doesn't understand I-packets and goes crazy when it receives one. Steve Graham may be SOL on this one because Mr. da Cruz says nobody is supporting MTS-Kermit anymore. -- Mike K7UIJ -- ------------------------------ End of INFO-CPM Digest V91 Issue #114 ************************************* 19-Jun-91 14:22:52-MDT,10188;000000000000 Return-Path: Date: Wed, 19 Jun 91 14:15:12 MDT From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V91 #115 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <910619141515.V91N115@WSMR-SIMTEL20.ARMY.MIL> INFO-CPM Digest Wed, 19 Jun 91 Volume 91 : Issue 115 Today's Topics: CP/M-86 Problem L80-m80 Re: Assembling & linking .MAC files ... (2 msgs) Re: C compiler for CP/M or MP/M Re: Help needed: Compupro 8/16 running concurrent cp/m (2 msgs) terminal programs ---------------------------------------------------------------------- Date: Tue, 18 Jun 91 10:45:39 -0400 From: Jay Sage Subject: CP/M-86 Problem Message-ID: <9106181045.AA16324@LL.MIT.EDU> As a Boston Computer Society resource person (i.e., emergency problem solver), I was just contacted by someone with a problem that I had no immediate solution to. Since I am about to go away on vacation for a month, I hope that someone on the net will be able and willing to help this person. Ms Gale's father has been using his IBM XT clone for about ten years under CP/M-86. The person who set him up gave him no boot floppies (or he lost them), and in the whole time he has never written anything to floppy. Suddenly the machine complains on boot-up of a disk error while trying to read CPM.SYS. Obviously, he would like to get the machine running again, at which point Ms Gale plans to move the files over to MS-DOS. It sounds to me as if the CPM.SYS file has become corrupted (the optimistic view) or that the whole partition has become corrupted (the pessimistic view). One obvious first step is to get from someone a bootable CP/M-86 diskette that is appropriate for this hardware. I've asked my friends who might have had CP/M-86, but so far I have not found I copy. I have CP/M-86 for the ATR8000, but I doubt that it can work on a PC (the disk is in an ATR8000 format that cannot even be read by Uniform or MediaMaster). I did copy the CPM.SYS file over to a diskette in another ATR8000 format, which I could read on the PC, and I eventually got it onto a diskette in CP/M-86 PC format. I've sent this to Ms Gale; however, I don't think this it will help her. First, she won't have any way to get it onto the hard disk, and, second, it may well be hardware dependent (I don't know which of the OS components are included in this file). A second approach someone suggested to me is to run a program on the DOS hard disk partition (the machine will come up in DOS) that can read files from the CP/M partition. The DEC Rainbow had such a utility, but I don't know whether such utilities are available under generic MS-DOS or PC-DOS. Anyway, I hope someone out there can help. If so, please contact Ms Gale, as follows: Jill Gale Shott Fiber Optics 122 Charlton Street Southbridge, MA 01550 508-765-9744 x 207 I'd be interested in hearing by email of any progress that is made on the problem. Thanks. -- Jay Sage, SAGE @ LL.MIT.EDU ------------------------------ Date: Wed, 19 Jun 91 09:10 EDT From: He did! He did get married bare-footed! Subject: L80-m80 I thought these were like "for sale" items, i.e., not PD and not to be given around? If I'm wrong, would someone drop me a copy? Couldn't find any in Simtel, -John (JSHIN@HampVMS.bitnet) ------------------------------ Date: 17 Jun 91 12:03:58 GMT From: csus.edu!csusac!sactoh0!ijpc!ianj@decwrl.dec.com (Ian Justman) Subject: Re: Assembling & linking .MAC files ... Message-ID: dcook@spam.ua.oz (David Cook) writes: > Hello CP/Mers, > I grabbed Small-C from wuarchive.wustl.edu (which mirrors SIMTEL20), > and it seems to run ok. My problem now is that it generates .MAC > files, and I'm not sure how to assemble these > (well, if I had DRI's MAC or RMAC I'd probably know, but I don't :) > I do have M80 and L80 ... > I would appreciate general information on those programs You cannot use DRI's assembler/linker assembler set. You MUST use the ZASM/ZLINK (like Small-C, it's PD). You should be able to find it on any well-stocked BBS, and it's also on SIMTEL20. ------------------------------ Date: 18 Jun 91 20:45:47 GMT From: zephyr.ens.tek.com!orca.wv.tek.com!pogo!rickc@uunet.uu.net (Rick Clements) Subject: Re: Assembling & linking .MAC files ... Message-ID: <11092@pogo.WV.TEK.COM> In article ianj@ijpc.UUCP (Ian Justman) writes: }dcook@spam.ua.oz (David Cook) writes: }} Hello CP/Mers, }} I grabbed Small-C from wuarchive.wustl.edu (which mirrors SIMTEL20), }} and it seems to run ok. My problem now is that it generates .MAC }} files, and I'm not sure how to assemble these }} (well, if I had DRI's MAC or RMAC I'd probably know, but I don't :) }} I do have M80 and L80 ... }} I would appreciate general information on those programs }You cannot use DRI's assembler/linker assembler set. You MUST }use the ZASM/ZLINK (like Small-C, it's PD). You should be able }to find it on any well-stocked BBS, and it's also on SIMTEL20. I believe you are refering to two versions of Small C. Version 1.2 (supports float and Z80) requires ZASM/ZLINK. Veersion 2.1 (supports more control structures and the 8080 but not float) uses a DRI like assembler. It isn't quite like the DRI MAC or RMAC because it declares global and external symbols differently. Both the versions of Small C are avialable from SIMTEL-20. -- Rick Clements (RickC@pogo.WV.TEK.COM) ------------------------------ Date: Tue, 18 Jun 91 09:21:34 -0400 From: Jay Sage Subject: Re: C compiler for CP/M or MP/M Message-ID: <9106180921.AA15903@LL.MIT.EDU> "zephyr.ens.tek.com!tektronix!percy!m2xenix!quagga!ucthpx!uctcs!ken @uunet.uu.net" asked the perennial question about C compilers. I tried to reply directly, but his address is too long for my mailer to accept!!! >> Does anyone know if such a beastie exists either pd or commercially. There are several still available. My wife's company, Sage Microsystems, carries the famous BDS C (now in a special Z-System version as well as the standard CP/M version). The cost is $90. BDS C is very fast and produces very short, fast code. However, it is not quite K&R and certainly not ANSI. The cost is $90. We are about to go on vacation for a month, but if you email me immediately with your address, we can probably get some info to you before our departure. Another excellent possibility is Mix C, which I'm sure someone else will tell you about. It is very inexpensive and comes in both a CP/M and a DOS version (both together are only $25!). [In fact, I'd appreciate it if the person selling Mix C would send me some of their sales brochures -- we'd be happy to include them in information we send out to our customers.] I'm sure someone on the net will be happy to review the relative merits and demerits of all the C compilers. I don't program in C, myself, so I cannot offer any first-hand advice. -- Jay Sage ------------------------------ Date: 17 Jun 91 22:54:52 GMT From: cis.ohio-state.edu!zaphod.mps.ohio-state.edu!hobbes.physics.uiowa.edu!maverick.ksu.ksu.edu!uafhp!acrosby@ucbvax.Berkeley.EDU (Albert Crosby) Subject: Re: Help needed: Compupro 8/16 running concurrent cp/m Message-ID: <6739@uafhp.uark.edu> Here's a backwards follow-up question.... I'm using 8" single sided drives, but the diskettes I found are doubles... Someone mentioned punching a hole in singles to use 'em as doubles, can I do the same thing with doubles to use 'em as singles? If so, where do I put the hole? Many thanks! Albert ------------------------------ Date: 19 Jun 91 17:45:05 GMT From: baron!baron!pnet07!donm@nosc.mil (Don Maslin) Subject: Re: Help needed: Compupro 8/16 running concurrent cp/m Message-ID: <1991Jun19.174505.7866@baron.uucp> acrosby@uafhp.uark.edu (Albert Crosby) writes: >Here's a backwards follow-up question.... I'm using 8" single sided drives, but the diskettes I found are doubles... Someone mentioned punching a hole in >singles to use 'em as doubles, can I do the same thing with doubles to use 'em as singles? If so, where do I put the hole? > Yes, the reverse also will work. (Even better, perhaps, because on a DS drive it is sometimes necessary to cover the SS hole in the jacket.) The SS hole would be roughly half way between the DS hole and the vertical center line. *BUT*, the only really accurate way is to make a template from a genuine SS disk and use it to locate the hole. - don Keeper of the CP/M System Disk | UUCP: {nosc ucsd crash ncr-sd}!pnet07!donm Archives for the Dino(saur)SIG | ARPA: simasd!pnet07!donm@nosc.mil - San Diego Computer Society - | INET: donm@pnet07.cts.com ------------------------------ Date: 19 Jun 91 07:01:35 GMT From: comp.vuw.ac.nz!am.dsir.govt.nz!marcamd!mercury!kcbbs!kc@uunet.uu.net (Antony Warbrooke) Subject: terminal programs Message-ID: <1991Jun19.070135.4187@kcbbs.gen.nz> Does anyone out there know of a terminal program that will handle 19200 on a kaypro?? If so, then could you list its main features as I am thinking about writing one (it already does 19200 without interupts!). Also, does anyone out there have a kaypro 2 which has a greenish blue key (I call it cyan) where the [ { key should be?? If so, what does CP/M say at the top of your screen when you boot your machine?? Has anyone noticed that when you clear the screen on a kaypro that all the screen attributes get turned off e.g. blink, reverse etc??? See ya soon. ------------------------------ End of INFO-CPM Digest V91 Issue #115 ************************************* 20-Jun-91 13:30:07-MDT,10220;000000000000 Return-Path: Date: Thu, 20 Jun 91 13:22:40 MDT From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V91 #116 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <910620132242.V91N116@WSMR-SIMTEL20.ARMY.MIL> INFO-CPM Digest Thu, 20 Jun 91 Volume 91 : Issue 116 Today's Topics: 19.2 on a Kaypro 8" Floppy Disks CP/M boot disks Re: Reply to question about fast terminal for Kaypro 2 (2 msgs) Reply to question about fast terminal for Kaypro 2 TeleVideo 1603 ---------------------------------------------------------------------- Date: 19 Jun 91 10:30:04 GMT From: bobsbox!gnat!cmcewen@rutgers.edu (Chris McEwen) Subject: 19.2 on a Kaypro Message-ID: On 19 Jun 91 07:01:35 GMT, Antony_Warbrooke@kcbbs.gen.nz asks if anyone has written a terminal for a Kaypro that will handle 19.2. Antony, I would be interested in seeing what you write. We may want to publish this is The Computer Journal (TCJ). TCJ has and continues to actively support CP/M since 1982. Chris McEwen Editor -- Chris McEwen cmcewen@gnat.rent.com ..!rutgers!bobsbox!gnat!cmcewen ------------------------------ Date: Thu, 20 Jun 1991 09:08:55 PDT From: sprague.wbst311@xerox.com Subject: 8" Floppy Disks Message-ID: <"20-Jun-91 12:08:55 EDT".*.Michael_D._Sprague.wbst311@Xerox.com> Rather than punching holes in disks .... If anyone needs 8" single sided floppy disks, get in touch with me. I picked up a bunch of "almost new" ones at the last computer flea market I went to. While they were real cheap, the catch was that I had to buy them all. :-) Needless to say, I have more than I need. For that matter, I have more 8" double sided disks than I need too. ~ Mike (Sprague.Wbst311@Xerox.Com) ------------------------------ Date: 19 Jun 91 22:21:54 GMT From: agate!bionet!ucselx!petunia!cindy!warlock@ucbvax.Berkeley.EDU (John Kennedy) Subject: CP/M boot disks Message-ID: <1991Jun19.222154.16980@ecst.csuchico.edu> I'm looking for some 8-inch format Imasi boot disks, and also some 8-inch format Micromation boot disks. Both in single density format. If you have some, drop me some mail. I'll be willing to pay postage and whatever else it takes to get them here (within reason, that is). (-: -- Warlock, AKA +-----------------------------------------------+ John Kennedy | internet: warlock@ecst.csuchico.edu | CSU Chico +-----------------------------------------------+ KC6RCK IBM, You BM, We All BM for IBM! ------------------------------ Date: 20 Jun 91 14:43:03 GMT From: cis.ohio-state.edu!zaphod.mps.ohio-state.edu!samsung!noose.ecn.purdue.edu!ea.ecn.purdue.edu!wieland@ucbvax.Berkeley.EDU (Jeffrey J Wieland) Subject: Re: Reply to question about fast terminal for Kaypro 2 Message-ID: <1991Jun20.144303.7922@noose.ecn.purdue.edu> In article <9151911@ub.cc.umich.edu> Steve_Graham@UB.CC.UMICH.EDU writes: >... FASTTERM works >at 2400 (nothing else does) which is as high speed as I have been able to try. I have tried it at 19,200 bps, attached to the contty port of one of our AT&T 3B2's. It worked fine, as did MITE. I also tried out David Goodenough's UUCP for CP/M at 9600 bps -- it also worked in fine in both directions. I may have tried it 19,200 bps; if I did it worked OK: I'd remember if it didn't. By the way, I have a Kaypro 2X, so it has the slow video. The '83 series II's and IV's are supposed to be able to run at least 1200 baud without using interrupts for the serial port. Does anyone know if Mycroft still exists? They also used to sell COMPAT, a sort of UNIFORM clone. I still use MITE all the time. -- Jeff Wieland wieland@ecn.purdue.edu ------------------------------ Date: 20 Jun 91 18:10:32 GMT From: zephyr.ens.tek.com!wrgate!amadeus!donk@uunet.uu.net (Donald C. Kirkpatrick) Subject: Re: Reply to question about fast terminal for Kaypro 2 Message-ID: <6359@wrgate.WR.TEK.COM> In article <9151911@ub.cc.umich.edu> Steve_Graham@UB.CC.UMICH.EDU writes: >There is a fast terminal program available from simtel called FASTTERM >that might work at 19200. It has NO features, as far as I know. On MY >Kaypro II I can't get above 1200 baud without interrupts. FASTTERM works >at 2400 (nothing else does) which is as high speed as I have been able to try. I have used MEX at 9600 baud quite successfully on my kaypro II. It works just fine; it never retransmits a block so I knowcharacters are not being missed. The machine on the other end is also a CP/M machine running MEX. I may have a small advantage though; I have installed the modification to run the Kaypro at 5 MHz. rather than the stock 2.5 MHz. I may also have an advantage in having a hard disk on the Kaypro, but with the hand-shaking I don't think that should have any effect. Both MEX and the Kaypro overlay are on Simtel-20. -- -Don Kirkpatrick (donk@amadeus.WR.TEK.COM) UUCP: ...!uunet!tektronix!amadeus.wr.tek.com!donk ARPA: ------------------------------ Date: Wed, 19 Jun 91 23:43:18 EDT From: Steve_Graham@ub.cc.umich.edu Subject: Reply to question about fast terminal for Kaypro 2 Message-ID: <9151911@ub.cc.umich.edu> There is a fast terminal program available from simtel called FASTTERM that might work at 19200. It has NO features, as far as I know. On MY Kaypro II I can't get above 1200 baud without interrupts. FASTTERM works at 2400 (nothing else does) which is as high speed as I have been able to try. ------------------------------ Date: Wed, 19 Jun 91 14:53:53 EDT From: "Casimir M. Drahan" Subject: TeleVideo 1603 Recently someone posted a query about the TeleVideo 1603. I emailed a reply but I'm not sure if he received my message. Just in case I'm reposting here. ----------------------------------------------------------------------- At last, another TeleVideo 1603 owner to talk to... I see by your notes in CPM-DIGEST that you have been blessed ( or cursed :-) ) by coming into possession of a TeleVideo 1603. Soon you will know the ineffable joy of sitting before your 1603 with your fingers in your ears while both disk drives are accessing ( a sound which would send other computer users running for a repairman). But, I ask you, how can you tell if the disk drives are working, unless you can *HEAR* them? Seriously, I've had a TeleVideo 1603 for about five years now. Except for the inability to run most programs written for the IBM and clone machines (MS-DOS) it's not a bad computer. And no one is ever going to mistake it for an IBM. The TeleVideo 1603 is an 8088 machine running at 5 mz. Basic memory is 128 k which can be expanded to 256 k with the addition of a memory board which attaches to the mother board. It runs both CPM-86 and MS-DOS (2.0) operating systems. There is a mono graphics board available for the CPM-86 os but not for MS-DOS. I would assume that with the addition of a driver this could be used with MS-DOS. The problem is to find an old version of the Microsoft assembler to write the driver since, for obvious reasons, none of the current assemblers will run on the 1603. As you may have noticed there are three ports in back: a modem port, a serial printer port, and a mouse port. I have a modem and serial printer attached to my 1603. I've never seen a mouse for the 1603. The manual says you can attach one, but I don't know if one actaually exists. (*) The disk drives are 96 tpi, 760 k. Much larger than the drives that came with the original IBM pc. They have been described as sounding like coffee grinders. But, what the hell, you're never going to fall asleep while these babies are going. The drives will read regular double density disks as well. Along that line, I used 96 tpi Radio Shack disks when I first got my 1603. They cost more than regular double density disks but since they were 96 tpi, and easier to find than the other brands, I figured I didn't have much of a choice. Then I ran into some bad disks. So just for the hell of it I bought some regular double density Scotch disks. Not only did they format OK they seemed to work better. That's a subjective judgement, I know, but I haven't had any problems since I switched. I have the operating systems disks for both CPM-86 and MS-DOS. I also have the following: For MS-DOS - 2.0 os disk, WordStar 3.3, Mite and TeleAsync communications programs, TurboPascal (2.1, I think), Datalight-C compiler (this works as long as you don't use the features that are specific to the IBM pc), dbase 2, other odds and ends that I have accumulated over the years. For CPM-86 - 1.0 os disk, ASM86, TeleCalc, TeleAsync, WordStar 3.3, TeleWrite (iffy, I apparently corrupted the com file), another spreadsheet whose name I can't remember just now, some other odds and ends. I got the WordStar, communications programs, dbase, as well as the memory board, from Inovatek in California. They used to advertise in Computer Shopper. I'm pretty sure they're still around, though I haven't done business with them for a couple of years or so. I also have the MS-DOS, system/CPM-86, and tech manuals, plus the disk alignment disk. Well, I'm supposed to be working, so I'd better close. Write back with any questions you have. I'd like to stay in touch. Matt (*) After I wrote this I was informed (by Ed Grey) that a a mouse for the TeleVideo does indeed exist. Casimir Matthew Drahan Computer Services University of Toledo Bitnet: oprcmd@uoft01 Internet: oprcmd@uoft01.utoledo.edu ------------------------------ End of INFO-CPM Digest V91 Issue #116 ************************************* 22-Jun-91 01:21:42-MDT,11636;000000000000 Return-Path: Date: Sat, 22 Jun 91 01:15:29 MDT From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V91 #117 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <910622011530.V91N117@WSMR-SIMTEL20.ARMY.MIL> INFO-CPM Digest Sat, 22 Jun 91 Volume 91 : Issue 117 Today's Topics: 19.2 on a Kaypro MITE docs wanted MIX C Compiler for CP/M (or DOS) Small C which works with M80 & such Sperry computer UZI-280 update Zentec Zephyr manual ---------------------------------------------------------------------- Date: 22 Jun 91 06:12:18 GMT From: munnari.oz.au!comp.vuw.ac.nz!am.dsir.govt.nz!marcamd!mercury!kcbbs!kc@uunet.uu.net (Antony Warbrooke) Subject: 19.2 on a Kaypro Message-ID: <1991Jun22.061218.2983@kcbbs.gen.nz> With regards to my terminal program At the moment all it is is bits and pieces of my rom (81-278 or 81-299) code thrown together to speed up the screen so it can handle 19200 and Ansi. I hope to expand it to Xmodem and Ymodem. Also a phone number dialing thingy too. So far my code is (the com file) 2k long. I have no doubt that this wi go up quite rapidly as I add in X and Ymodem. If I find out how to do it, Zmodem is on the list too. Has anyone else out there been able to setup Zmodem under CP/M (apart from Zmp which is too slow.)?? See ya soon. ------------------------------ Date: Thu, 20 Jun 91 18:14:49 EDT From: "Casimir M. Drahan" Subject: MITE docs wanted I use the MITE term program from Microft Labs a lot. Unfortunately I don't have the docs for it. Does anyone on the list have them, or can point me to where I could get a copy? An original copy would be great, but a good photocopy will do. I'll will of course pay any reasonable costs. Thanks. Matt Casimir Matthew Drahan Computer Services University of Toledo Bitnet: oprcmd@uoft01 Internet: oprcmd@uoft01.utoledo.edu ------------------------------ Date: Fri, 21 Jun 91 09:13:06 -0400 From: ac959@cleveland.Freenet.Edu Subject: MIX C Compiler for CP/M (or DOS) Message-ID: <9106211313.AA10263@cwns1.INS.CWRU.Edu> >Date: 17 Jun 91 14:10:34 GMT >Subject: C compiler for Cp/M or MP/M >The heading says it all. Does anyone know if such a beastie exists either >pd or commercially. >-- >Ken MacGregor ken@cs.uct.ac.za >Computer Science ken%uctcs%quagga@uunet.uu.net >University of Cape Town ...uunet!{m2xenix!quagga,ddsw1!olsa99}!uctcs!ken ***************************************** The following information describes one of several C compilers available for CP/M. The MIX C compiler is a complete implementation of C as defined in "The C Programming Language" by Kernighan and Richie (the K & R standard). The C library functions provided are compatible with the Unix standard, therefore the programs written with MIX C are easily ported to other computers and operating systems. MIX C is available for both CP/M or PCDOS and source code written on one is easily transportable to the other. MIX C is designed especially for the beginning to intermediate level C programmer. Unlike other systems, MIX C doesn't assume that you're a C expert. With MIX C the 430 page manual includes a tutorial that guides you step by step through the C language. In my opinion the manual alone is worth the price of the entire package. The PCDOS version of MIX C has an optional 'debugger' available called 'Ctrace.' With Ctrace you can 'step' through your source code line by line or statement by statement, and see the results, which makes debugging a breeze. I also have the MIX Editor for sale in both CP/M and PCDOS versions. Among the many excellent features of the MIX Editor are the ability to work on two files simultaneously. The manuals for the MIX C and the MIX Editor cover both the CP/M and the PCDOS versions. The software is available on many UNIFORM supported 5.25" (DD) CP/M and IBM-PC (360K) disk formats. I prefer to use TeleVideo (5.25", DD, DS, 48tpi) CP/M disks, since I use TeleVideo computers and therefore I can test the disk before shipping. Please specify your choice. The price for each of the above software packages is only $20.00 plus $5.00 for shipping and handling (UPS ground, in the continental US). Orders shipped to a California address must include 7% sales tax. If you order both the CP/M and PCDOS versions of either the MIX C compiler or MIX Editor the price is only $25.00 plus $5.00 for S&H (UPS ground, in the 48 contiguous states). At this special low price only one manual is provided. Contact me at any address below for shipping charges outside the US (48 contiguous states) or for additional information. Thanks for your interest. Take care. ** System Requirements ** MIX C Compiler CP/M version: MS/PCDOS version: Z80 CPU PCDOS (2.0 or higher) CP/M 80 (2.0 or higher) 128K memory 55K memory 1 disk drive 2 disk drives or HD MIX Editor CP/M version: MS/PCDOS version: Z80 CPU PCDOS (2.0 or higher) CP/M 80 (2.0 or higher) 192K memory 55K memory 1 disk drive -- Ed Grey \*\ Sysop of The Grey Matter BBS & RCP/M 213-971-6260 P.O. Box #2186 \*\ Bitnet: ac959%cleveland.freenet.edu@cunyvm Inglewood, CA 90305 \*\ Internet: ac959@cleveland.freenet.edu USA \*\ v.: 213-759-7406 \*\ Fido: 1:102/752 \*\ GEnie: E.GREY1 ------------------------------ Date: 20 Jun 91 05:04:25 GMT From: csus.edu!csusac!sactoh0!ijpc!ianj@ucdavis.ucdavis.edu (Ian Justman) Subject: Small C which works with M80 & such Message-ID: <3LqT41w164w@ijpc.UUCP> After I posted that little message a while back, I had forgotten that I had downloaded the Small-C that will work with M80, but I haven't tried it, and I stand corrected (by myself, as in I corrected myself. How's THAT for an undulating sentence structure? :-) ). ------------------------------ Date: 22 Jun 91 00:25:42 GMT From: taco!news@mcnc.org (Daniel L'Hommedieu) Subject: Sperry computer Message-ID: <1991Jun22.002542.9316@ncsu.edu> Please don't flame me if this is wrong, but is a Sperry computer a CP/M machine? If so, where can I find languages for it? (i.e. BASIC, Pascal, or C) If not, please let me know to which newsgroup I should post regarding Sperry equipment. Please reply by email. Thanks in advance. Daniel L'Hommedieu eagle@catt.ncsu.edu As the sweat poured down my forehead, I quickly glanced at the clock to see how much longer I had to complete my exam. The two hours left would seem like days. As each precious second passed, I decided I should make up new math rules. Two hours is enough to be creative, isn't it? ------------------------------ Date: 22 Jun 91 00:40:52 GMT From: zephyr.ens.tek.com!tektronix!reed!intelhf!ichips!inews!cad412!dbraun@uunet.uu.net (Doug Braun ~) Subject: UZI-280 update Message-ID: <4815@inews.intel.com> Here is a more detailed description of the status of UZI-280. First a report from last March: UZI-280 is in the process of being written. My computer system now has a Z280 with 128K of memory. The kernel and user processes now run in seperate address spaces, but total swapping is still used at present. The various hardware traps of the Z280 (privileged instruction, system stack overflow, access violation) are handled correctly. There is proper protection, in the sense that a user process cannot munch kernel data, like in the original UZI. Current plans include allowing user processes to run seperated I and D address spaces (thus allowing 64K of code and 64K of data), and implementing demand paging instead of total swapping. UZI280 will then have the power and functionality (more or less) of a PDP-11/34 or PDP-11/60 running 7th Edition Unix. Now, what I have done since then: The demand-paged virtual memory is implemented. However, the swapper still has at least one bug in it (it crashes when trying to handle programs larger than available user RAM. Anyway, you get a full 64K shared code/data for your process, and a full 64K for the kernel (lots more room for buffers, etc.) The kernel does not swap, and currently ties up a minimum of 40K or so RAM. leaving me with at most 88K for user processes. All the traps, segmentation violations, auto-growing of stack, etc. work just great. All system calls will trap on illegal addresses passed to them, like they should. The TTY driver is much better than that in the original UZI; it handles the stty() calls that vi needs. I have tested UZI280 with two terminals at once. I have ported "stevie", the vi clone, now renamed "v8". However the code occupies almost 64K, so it really needs seperate user/data space to be useful. The disk drivers are still not interrupt-driven. One of the Z280 timers is used for the clock, and the internal UART is used for the console, thus UZI280 is more hardware-independent than the original UZI. Virtually all of the hard stuff for UZI-280 is done. However, I do not plan to spend more time on it myself, and I really want to distribute it to people who can take advantage of it. I moved a couple of weeks ago, and all my computer stuff is still in boxes. As soon as I have the time, I plan to package and upload UZI-280 to SIMTEL20 or wherever. Several people have expressed interest. I will certainly also distribute my CP/M 3 Z280 BIOS, and I would like to distribute my Z280 enhancements to the Q/C C Compiler, if I can legally do so. Doug Braun Intel Corp CAD 408 765-4279 dbraun@scdt.intel.com or maybe: / decwrl \ | hplabs | -| oliveb |- !intelca!mipos3!cadev6!dbraun | amd | \ qantel / Doug Braun Intel Corp CAD 408 765-4279 dbraun@scdt.intel.com or maybe: / decwrl \ | hplabs | -| oliveb |- !intelca!mipos3!cadev6!dbraun | amd | \ qantel / ------------------------------ Date: 21 Jun 91 20:19:17 GMT From: fernwood!cronos!mnementh!rush@uunet.uu.net (Ed Rush) Subject: Zentec Zephyr manual Message-ID: <770@cronos.metaphor.com> I'm posting this for a friend. Please send all replies to MCGLONE_DAVID@tandem.com. Says David: "I'm looking for the manual(s) for a Zentec Zephyr terminal. I don't mean a Tandem 6520, but an actual Zentec terminal with Zentec ROMs. Please respond to MCGLONE_DAVID@TANDEM.COM if you have the manuals. I'd like to buy them from you, or obtain a copy. "I'm also in the market for later model Zentec terminals, such as the Zentec 1210." -- ----------------------------------------- Ed Rush, employed by but not speaking for Metaphor Computers, Mtn. View, CA UUCP: [...!{apple|decwrl}!]metaphor!mnementh!rush Internet: rush@mnementh.metaphor.com ----------------------------------------- Calm down, everyone, it's only ones and zeroes. ------------------------------ End of INFO-CPM Digest V91 Issue #117 ************************************* 27-Jun-91 12:29:41-MDT,9190;000000000000 Return-Path: Date: Thu, 27 Jun 91 12:21:31 MDT From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V91 #118 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <910627122132.V91N118@WSMR-SIMTEL20.ARMY.MIL> INFO-CPM Digest Thu, 27 Jun 91 Volume 91 : Issue 118 Today's Topics: 8086 coprocessor board for Xerox Boot disks for Kaypro 2 and Osborne 1 CP/M 3 For MicroBee? HELP!! -Annoying Problem with Televideo 803H w/o Hard Drive- m80 & l80 Re: Assembling & linking .MAC files ... Re: m80 & l80 Reply to question about fast terminal fo Shugart 14" drive/ CP/M ---------------------------------------------------------------------- Date: 22 Jun 91 21:46:19 GMT From: iggy.GW.Vitalink.COM!widener!netnews.upenn.edu!grad1.cis.upenn.edu!traw@lll-winken.llnl.gov Subject: 8086 coprocessor board for Xerox Message-ID: <45045@netnews.upenn.edu> FOR SALE * 8086 coprocessor board with 128k RAM for Xerox 820-II, EM-II, 16/8, etc. cp/m machines $50 shipped Drew Moore - 617/328-5869 or email ------------------------------ Date: 26 Jun 91 19:49:25 GMT From: fluke!doctor@beaver.cs.washington.edu (Doug Klopfenstein) Subject: Boot disks for Kaypro 2 and Osborne 1 Message-ID: <1991Jun26.194925.2995@tc.fluke.COM> I was wondering if anyone out there had a boot disk for a Kaypro 2? I got one earlier this year at a local flea market (without software, naturally) and am interested in using it as a portable typewritter (with a printer, of course). If anyone has a system disk I could have a copy of (or purchase ), please let me know. I am anxious to try out this beast. Oh yes, if anyone has a boot disk for an Osborne 1, I have one of those that I bought at an auction recently (without software - again naturally). If you don't have either of these and know of someone who does, let me know. Thanks, Doug Klopfenstein doctor@fluke.com ------------------------------ Date: 23 Jun 91 09:19:27 GMT From: munnari.oz.au!metro!cs.uow.edu.au!u8515682@uunet.uu.net (Wayne Doust) Subject: CP/M 3 For MicroBee? Message-ID: <1991Jun23.091927.17383@cs.uow.edu.au> Does anyone know whether a port of CP/M 3 for the MicroBee 128k exists or not? Wayne -- "Esk, in fact, moved through the fair more like an arsonist moves through a hayfield or a neutron bounces through a reactor, poets notwithstanding, and the hypothetical watcher could have detected her random passage by tracing the outbreaks of hysteria and violence." Equal Rites by T. Pratchett ------------------------------ Date: 27 Jun 91 09:09:43 GMT From: ccncsu!handel.cs.colostate.edu!baumgard@purdue.edu (jan feli baumgardner) Subject: HELP!! -Annoying Problem with Televideo 803H w/o Hard Drive- Message-ID: <15736@ccncsu.ColoState.EDU> HELP! I have a Televideo TS-803H CP/M machine, running CP/M 2.2. I have a hardware problem. The machine originally came with a hard drive and a single floppy drive. The hard disk was cannabalized (I.E. MISSING) when I got the machine, and although It runs fine off of the floppy drive, Whenever I turn the machine on, I recieve a "HARDWARE ERROR: CONTACT DISTRIBUTOR" or a "Booting from hard disk" message. Once I turn the machine on and off and on a few times, it has no trouble booting from the floppy drive. I was wondering what it takes to make the computer realize that the hard disk is missing. If anyone knows the answer to this question, PLEASE, PLEASE (grovel grovel beg) PLEASE let me know. It would be most gratifying to clean up this annoying, if not life-threatening problem. -Felix baumgard@handel.cs.colostate.edu (303)2249058 ------------------------------ Date: 25 Jun 91 13:10:24 GMT From: munnari.oz.au!metro!cs.uow.edu.au!u8515682@uunet.uu.net (Wayne Doust) Subject: m80 & l80 Message-ID: <1991Jun25.131024.10960@cs.uow.edu.au> A friend of mine gave me all his old CP/M stuff and I cannot now contact him. Among the software there was the macro-80 assembler. Can anyone tell me how to use it to assemble an already existing asm file? I cannot get it to work. Also on the disk was: cref80 disilog lib zsid Can anyone give me information on these? Thanks Wayne -- "Esk, in fact, moved through the fair more like an arsonist moves through a hayfield or a neutron bounces through a reactor, poets notwithstanding, and the hypothetical watcher could have detected her random passage by tracing the outbreaks of hysteria and violence." Equal Rites by T. Pratchett ------------------------------ Date: 23 Jun 91 09:51:14 GMT From: astroatc!nicmad!madnix!ruth!rat@speedy.wisc.edu (David Douthitt) Subject: Re: Assembling & linking .MAC files ... Message-ID: <4VNZ41w164w@ruth.UUCP> rickc@pogo.WV.TEK.COM (Rick Clements) writes: > I believe you are refering to two versions of Small C. Version 1.2 (supports > float and Z80) requires ZASM/ZLINK. Veersion 2.1 (supports more control > structures and the 8080 but not float) uses a DRI like assembler. It isn't > quite like the DRI MAC or RMAC because it declares global and external symbol > differently. What do you mean by "uses a DRI-like assembler"? Is this what Small-Mac is? I've been using it for a while now, and it works well. What is this ZASM/ZLINK thingie anyway? Wouldn't you know it, I couldn't find my Small-C book (yes, I PAID for Small-C... AND Small-Mac... AND Small-Tools too... GOOD STUFF!) I don't know what version I have - may be a little out of date by now. But then, is Small-C for CP/M supported anymore?? UUCP: uwvax!astroatc!nicmad!madnix!ruth!rat | [witty saying stolen... InterNet: rat@ruth.UUCP | reward offered for safe ==== Apple II Forever! ==== | return.] ------------------------------ Date: 26 Jun 91 07:38:49 GMT From: mcsun!hp4nl!gufalet.let.rug.nl!rug4!laverman@uunet.uu.net (Bert Laverman) Subject: Re: m80 & l80 Message-ID: <1991Jun26.073849.16658@cs.rug.nl> In article <1991Jun25.131024.10960@cs.uow.edu.au> u8515682@cs.uow.edu.au (Wayne Doust) writes: >A friend of mine gave me all his old CP/M stuff and I cannot now >contact him. Among the software there was the macro-80 assembler. >Can anyone tell me how to use it to assemble an already existing >asm file? I cannot get it to work. Also on the disk was: You should note that there is a definite syntax difference between input for CP/M's ASM, and M80. M80 source files usually get the extension ".MAC". Also the object files differ (".REL" vs ".HEX"). M80's linker can do a lot more than the standard Digital Research stuff. I haven't got the manual at hand, sorry. >cref80 Creates a cross-reference listing from a special cross-reference file plus the source file. The cross-reference file can optionally be created by M80. >disilog Never heard of this one before... a disassembler maybe??? >lib Used to build and maintain libraries of object files. >zsid A z80 version of sid, the Symbolic Instruction Debugger. It can read symbol tables to get more readable output. >Can anyone give me information on these? If you want a more thorough discussion of Macro-80 use & syntax, mail me. Greetings, Bert -- #include Bert Laverman, Dept. of Computing Science, Groningen University laverman@cs.rug.nl bert@arrakis.nl.mugnet.org ------------------------------ Date: 23 Jun 91 07:50:23 GMT From: comp.vuw.ac.nz!am.dsir.govt.nz!marcamd!mercury!kcbbs!kc@uunet.uu.net (Antony Warbrooke) Subject: Reply to question about fast terminal fo Message-ID: <1991Jun23.075023.12104@kcbbs.gen.nz> Do you know if the pre 84 Kaypros use the same screen chip as the 84 models?? I take it that you have a pre 84 Kaypro II??? I know that my 84 Kaypro 2 does start to drop characters once 2400 and above is tried. How does one get onto Simtel??? Please remember that I am in New Zealand. :-( See ya soon. ------------------------------ Date: 23 Jun 91 06:55:11 GMT From: cis.ohio-state.edu!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!aplcen!jhunix!jhunix.hcf.jhu.edu@ucbvax.Berkeley.EDU (Robert Davis) Subject: Shugart 14" drive/ CP/M Message-ID: <8791@jhunix.HCF.JHU.EDU> Hello, is there anyone out there who has used a system with a Shugart 14" disc-drive? Anyone out there have, or know where I could obtain schematics for this drive? In addition, can anyone provide me with any suggestions as to how I can hook up one of these beasts to a Dynabyte CP/M system? I already have a seperate power-supply for it. Is the interface the same as, or similar to, that for the Shugart 8" floppies? Thanks, very much, in advance! ------------------------------ End of INFO-CPM Digest V91 Issue #118 ************************************* 28-Jun-91 21:23:50-MDT,9267;000000000000 Return-Path: Date: Fri, 28 Jun 91 21:16:02 MDT From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V91 #119 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <910628211603.V91N119@WSMR-SIMTEL20.ARMY.MIL> INFO-CPM Digest Fri, 28 Jun 91 Volume 91 : Issue 119 Today's Topics: Antony Warbrooke--brief reply CRUNCH/UNCRunch for UNIX Re: HELP!! -Annoying Problem with Televideo 803H w/o Hard Drive- Re: How to decompress "*.?Y?" files? Re: m80 & l80 Re: Shugart 14" drive/ CP/M S100 motherboard AVAILABLE to good home ---------------------------------------------------------------------- Date: Fri, 28 Jun 91 14:48:48 EDT From: Steve_Graham@ub.cc.umich.edu Subject: Antony Warbrooke--brief reply Message-ID: <9231821@ub.cc.umich.edu> Greetings! I have a Kaypro II that loses characters at speeds above 1200 too with most terminal programs, but there is a simple program, FASTTERM that works at higher speeds. I'm told that this has to do with whether or not things are "interrupt-driven". If you have access to the internet (which it doesn't look like) you can get files from Simtel by ftp, otherwise I guess you can get them by mail request as discussed in a recent digest. Send mail to sg2@ub.cc.umich.edu --Steve ------------------------------ Date: Wed, 26 Jun 91 13:02:05 BST From: J Jackson Subject: CRUNCH/UNCRunch for UNIX Message-ID: <16559.9106261202@csunb0.dcs.leeds.ac.uk> Anybody have an UNCRuncher in C so that I can unpack some CPM stuff from SIMTEL20 on my UNIX box ? (I tried uncompress - no go) thanks ======================================================================= Jim Jackson Email : School of Computer Studies UK - JANET : jj@uk.ac.leeds.dcs Leeds University Internet : jj@dcs.leeds.ac.uk Leeds LS2 9JT UK Phone : +44 532 335451 ======================================================================= Opinions! What Opinions? I just wield the brush round here. ------------------------------ Date: 28 Jun 91 17:40:23 GMT From: world!bmarcum@uunet.uu.net (Bill Marcum) Subject: Re: HELP!! -Annoying Problem with Televideo 803H w/o Hard Drive- Message-ID: <1991Jun28.174023.9215@world.std.com> Is there a dip switch on the back of the machine? I have a Televideo TPC-1, which is supposed to be similar to the 803 (but no hard disk, and it's "portable".) On my machine, some of the dip-switch settings control baud rate, one toggles the screen between green-on-black and black-on-green, and one causes a "Boot Error" message if set wrong. ------------------------------ Date: 27 Jun 91 10:47:12 GMT From: uupsi!sunic!dkuug!diku!ankh@nyu.edu (Klaus Ambrass) Subject: Re: How to decompress "*.?Y?" files? Message-ID: <1991Jun27.104712.117@odin.diku.dk> wittig@GMDZI.GMD.DE (Georg Wittig) writes: >I'm looking for the source code (C or Pascal) of a program that can >decompress those ``*.?Y?'' files. I couldn't find such a file on SIMTEL20. >Note, I'm not looking for a ``*.COM'' file that does it (I do have that), >but for a source code file. Servus Georg. I've seen this msg a couple of times now but no reply (am I wrong - was off terminal a while). Perhaps the only solution is that you disassemble your decompressor program and find out what is going on. I've been told that it (some) is written in C, so a disassembling might cause just a triffle of a problem. In any case I'd like to know how it's done too. Maybe, if I got the time I can try to disassemble my GEL Uncruncher v2.6 before you... So long for now. -- | This is also me: | +-------------------------------------------------------+ ankh@freja.diku.dk | | | locked away at: | +-------------------------------------------------------+ Some U in Copenhagen| ------------------------------ Date: 28 Jun 91 03:45:32 GMT From: csusac!sactoh0!ijpc!ianj@ucdavis.ucdavis.edu (Ian Justman) Subject: Re: m80 & l80 Message-ID: laverman@cs.rug.nl (Bert Laverman) writes: > In article <1991Jun25.131024.10960@cs.uow.edu.au> u8515682@cs.uow.edu.au (Way > >zsid > A z80 version of sid, the Symbolic Instruction Debugger. It > can read symbol tables to get more readable output. You'd be much better off using Z8E which, IMHO, is the best Z80 debugger I've ever tried. Besides, you get source code if you want your own custom mods, and above all, IT'S FREE!!!!! Very professional quality. I'm surprised that Rick Surwillo (sp?) didn't sell it as a commercial product. It, like ZSID, is a symbolic debugger. You can set up to 8 breakpoints (or was that 16?) and tell each breakpoint through how many calls to run before stopping, you can bypass repetitive subroutine, and one thing that Z8E has that ZSID does not have is animated debugging. You may have to set up for your specific terminal, but it comes default for ADM-3A-type terminals. It shows about 20 lines of your code and processor status above it. And it puts a pointer next to the instruction that is about to be executed (*BANG* *THUD* :-) ). Plus, you can mess around with ports. I have it on all the computers I either have or emulate a Z80 on. Yes, it will work with Z80MU for the IBM, but I haven't tried it with 22NICE. Works well on my CompuPro 8/16's SPUZ (slave Z80 capable of running 4 tasks concurrently) with the main system a 286 running Concurrent DOS. It is the most resilient Z80 debugger I've ever seen. I don't know where I'd be without it!!!! ___________________________________________________________________________ |Ian Justman |The Rimmer Directive: | |6612 Whitsett Drive (USPSnet) |"Never tangle with anything that's got | |North Highlands, CA 95660-3830 |more teeth than the entire Osmond Family."| |(916) 344-5360 (AT&Tnet) |__________________________________________| |UUCP: ...!{ames | apple | sun }!pacbell_ | |UUCP: ...!ucbvax!ucdavis!csusac_________|-- !sactoh0!ijpc!ianj | |___________________________________________________________________________| ------------------------------ Date: 27 Jun 91 18:46:32 GMT From: csusac!sactoh0!ijpc!ianj@ucdavis.ucdavis.edu (Ian Justman) Subject: Re: Shugart 14" drive/ CP/M Message-ID: <0BR841w164w@ijpc.UUCP> rdavis@jhunix.hcf.jhu.edu (Robert Davis) writes: > Hello, is there anyone out there who has used a system with a Shugart > 14" disc-drive? Anyone out there have, or know where I could obtain > schematics for this drive? In addition, can anyone provide me with > any suggestions as to how I can hook up one of these beasts to a > Dynabyte CP/M system? I already have a seperate power-supply for it. > Is the interface the same as, or similar to, that for the Shugart 8" > floppies? Thanks, very much, in advance! If you're talking about the DB8/1 or the DB8/2 S-100 box, I believe you should be able to hook it straight to the box, provided you have a controller. I have a Dynabyte DB8/1 on which I run a Fujitsu 20 megabyte 8" drive. I have a spare 10 megabyte if you want it. Also, by the way, if you indeed have a DB8/1 (or DB8/2, which version of the BIOS are you running? Give me a buzz at the number below. ______________________________________________________________________________ |Ian Justman | The Rimmer Directive: | |6612 Whitsett Drive (USPSnet) | "Never tangle with anything that's got | |North Highlands, CA 95660-3830 | more teeth than the entire Osmond Family." | |(916) 344-5360 (AT&Tnet) |_____________________________________________ ------------------------------ Date: 27 Jun 91 20:09:31 GMT From: cis.ohio-state.edu!pacific.mps.ohio-state.edu!linac!uwm.edu!ogicse!sequent!muncher.sequent.com!frost@ucbvax.Berkeley.EDU (Paul Frost) Subject: S100 motherboard AVAILABLE to good home Message-ID: <1991Jun27.200931.19016@sequent.com> Never used Vector Graphics S-100 motherboard and card-cage. Features 18 slots 0.125" pin-to-pin and 0.25" between rows Groundplane (to reduce noise) aluminum card-cage has nylon cardguides 6 gold plated connectors ( not yet installed, you supply 12 more ) bus termination kit ( not yet installed ) Includes: pull-up and pull-down resistors, +5V regulator My primary concern is that this go to someone who will use it. Convince me of this and you can have it for postage. I will also consider larger sums to help me arbitrate if there is contention for the bus :-) -- Paul (frost@sequent.com) ------------------------------ End of INFO-CPM Digest V91 Issue #119 *************************************