;  ESL1270.GEN     TurboDOS v1.41+C.00      17jun87
;
;  For Model 1270 slaves
;
CNFTBL         ; Configuration table
STDSLAVE       ; Modules for a slave system
BNKMGR         ; Memory Bank Manager
BNK1270        ; Memory Bank Driver for Model 1270 board
BNKREQ         ; Loader of programs over the network into banked memory
CPMSUP         ; CP/M Function Support
MPMSUP         ; MP/M Function Support
QUEMGR         ; MP/M queuing function support
USRSOM         ; User Sign-On Message area, filled by STDSLAVE.PAR
NITIMS         ; Cold-start initialization, particularly hardware init
RTCIMS         ; Real-time clock driver
ZS1270         ; Serial I/O driver
CONSOL         ; Terminal handler
MCD            ; Master Circuit Driver
CKTDCB         ; Circuit Device Control Blocks
SUBMIT         ; To emulate CP/M processing of $$$.SUB files
PATCH          ; Software 2000 Patch Area
;
;==============================================================================
;  PRINTER SELECTION
;  If you have a printer plugged into your slave's 2nd port, choose a handler
;  for the printer's protocol.  NOTE:  Turbogen can only handle CTS, XON,
;  and ETX.
;==============================================================================
;LST300         ; No-handshake Serial Printer at 300 baud
;LSTCTS         ; Clear-to-Send Serial Printer
;LSTCTX         ; CTS printer with optional programmed delay
;LSTXON         ; X-ON,X-OFF Serial Printer
;LSTETX         ; ETX-ACK Serial Printer
;
;  If you want to spool to your local printer, enable DSPOOL.
;
;DSPOOL		; De-spooler: sends chars from spool file to printer
;
;==============================================================================
;  USER-WRITTEN DRIVERS
;  If you have any, add them here.
;==============================================================================

