;  STDSINGL.GEN     TurboDOS v1.4+      09jun87
;
CNFTBL         ; Configuration Table: tells Turbogen where to find globals
STDSINGL       ; Modules for a single-user system without spooling
;STDSPOOL       ; Modules for a single-user system with spooling
BNKMGR         ; Memory Bank Manager
BNK1270        ; Memory Bank Driver for Model 1270 board
CPMSUP         ; CP/M Function Support
;MPMSUP         ; MP/M Function Support
;QUEMGR         ; MP/M queuing function support
USRSOM         ; User Sign-On Message area, filled by STDSINGL.PAR
NITIMS         ; Cold-start initialization, particularly hardware init
MPENIT         ; Memory parity/page 0 initialization
RTCIMS         ; Real-time-clock driver
CONSOL         ; Terminal handler
;SUBMIT         ; To emulate CP/M processing of $$$.SUB files
PATCH          ; Software 2000 Patch Area
;
;==============================================================================
;  SERIAL I/O CONTROLLERS
;    If you don't have any Model 630 or Model 480 I/O boards, choose SET ONE.
;  With SET ONE, you can choose either CONREM and 2 printers, or CONSOL and
;  1 printer.
;    If you have one or more I/O boards, choose SET TWO.  With SET TWO, you
;  can choose as many devices as you have serial ports.
;==============================================================================
;  Set One
;
ZS1270          ; Fast serial I/O driver for Model 1270 ONLY
;
;  Set Two
;
;ZSSER          ; Serial I/O handler: must be present
;ZSSCC          ; Serial driver for Model 1270 ports
;ZSACE          ; Serial driver for Model 631 and 480 boards - "Asynchronous
;              ; Communications Elements"
;
;==============================================================================
;  PRINTER SELECTION
;  How many printers you can choose depends upon how many serial ports you
;  have available.  Which drivers you choose depends upon your printers.
;  In any case, remember that TURBOGEN only recognizes CTS, XON, and ETX,
;  serial drivers, in that order.  DO NOT CHANGE THE ORDER OF THE DRIVERS.
;==============================================================================
;LST300         ; No-handshake Serial Printer at 300 baud
;LSTCTS         ; Clear-to-Send Serial Printer
;LSTCTX         ; CTS printer with optional programmed delay
LSTXON         ; X-ON,X-OFF Serial Printer
;LSTETX         ; ETX/ACK Serial Printer
;LSTIMS         ; Centronics Parallel Printer
;LSTNEC         ; NEC or Diablo Parallel Printer
;
;==============================================================================
;  DISKS
;
;  The modules we supply allow you to choose one of 5 configurations:
;
;  A.	Floppies only.
;  B.	Floppies and the non-DMA winchesters (C00821 controller).
;  C.	Floppies and the DMA winchesters (C01100 controller).
;  D.	Floppies and cartridge configured as 12 8-megabyte logical disks.
;  E.	Floppies and cartridge configured as 6 16-megabyte logical disks.
;
;  Choose one of the sets below accordingly.
;
;  NOTE:	"ZSUB", "ZZIPUSH", and "ZLUT" must be selected regardless.
;
;  NOTE:	The order of the driver modules determines the name of the
;		driver entry point.  For example, if you have Floppies and
;		a Winchester, the Floppy Driver (for both 8" and 5") will
;		be DSKDRA, and the Winchester Driver will be DSKDRB.  If you
;		have Floppies and a Cartridge, the Floppy Driver will be
;		DSKDRA, and the Cartridge Driver will be DSKDRB.  You need
;		to know this in order to fill "DSKAST" in STDSINGL.PAR.
;==============================================================================
;
;  Routines needed regardless of configuration
;
ZSUB           ; Common I/O subroutines
ZZIPUSH        ; Register save/restore routines for Interrupt Service
ZLUT           ; Logical Unit Table
;
;  A.  Floppies only.
;
;FD930          ; Modules needed to run a Model 930 Floppy controller
;               ; on a system without a Winchester
;
;  B.  Floppies and non-DMA winchester
;
;WD821           ; Modules needed to run floppies and
;               ; a Model C00821 controller (non-DMA)
;
;  C.  Floppies and DMA winchester
;
WD1100         ; Modules needed to run floppies and
;               ; a Model C01100 controller (DMA)
;
;  D.  Floppies and cartridge, as 6 16-megabyte logical drives
;
;FD930          ; Model 930 Floppy controller
;CD6-16         ; Up to 6 16 Megabyte logical drives
;
;  E.  Floppies and cartridge, as 12 8-megabyte logical drives
;
;FD930          ; Model 930 Floppy controller
;CD12-8         ; Up to 12 8 Megabyte logical drives
;
;==============================================================================
;  USER-WRITTEN DRIVERS
;  If you have any, add them here.
;==============================================================================
