;  SLV862.GEN     TurboDOS v1.4+      12 October 1984
;  For Model 740 and Model 862 slaves
;
CNFTBL         ; Configuration Table: tells Turbogen where to find globals
STDSLAVE       ; Modules for an unbanked network slave system
NETLOD         ; Network File Loader: loads programs over the network
CPMSUP         ; CP/M Function Support
;MPMSUP         ; MP/M Function Support
;QUEMGR         ; MP/M queuing function support
USRSOM         ; User Sign-on Message Area, filled by STDSLAVE.PAR
NIT740         ; Cold-start initialization, particularly hardware init
MPENIT         ; Memory parity/page 0 initialization
CONSOL         ; Terminal handler
SPD740         ; Serial & Parallel Drivers for 8-bit slaves
SLVRES         ; Keyboard Reset subroutine
SCD740         ; Slave Circuit Driver for 8-bit slaves
;SUBMIT         ; To emulate CP/M processing of $$$.SUB files
PATCH          ; Software 2000 Patch Area
;
;==============================================================================
;  PRINTER SELECTION
;==============================================================================
;  If you have a printer plugged into your slave's 2nd port, choose a handler
;  for the printer's protocol.  NOTE:  Turbogen only deals with CTS, XON,
;  and ETX.
;
;LST300         ; No-handshake Serial Printer at 300 baud
;LSTCTS         ; Clear-to-Send Serial Printer
;LSTCTX         ; CTS printer with optional programmed delay
;LSTXON         ; X-ON, X-OFF Serial Printer
;LSTETX         ; ETX-ACK Serial Printer
;
;==============================================================================
;  OPTIONS
;==============================================================================
;
;RTC740         ; Relative-Time-Clock for applications which use "Delay Process"
;
;==============================================================================
;  USER-WRITTEN DRIVERS
;  If you have any, add them here.
;==============================================================================

