|
Icon |
Filename |
Bytes |
Date/Time |
Description |
![[Up]](/icon/updir_1.gif)
|
../
|
![[SUB]](/icon/dir_1.gif)
|
manuals_and_images_in_english_language/
|
|
|
other_publications/
|
|
0dir.txt
|
3,298
|
2022/7/13 [21:31:14]
|
|
|
dmv-clone-manual.zip
|
97,184,527
|
2022/7/13 [21:21:30]
|
|
|
level_zero_diagnostics.jpg
|
122,577
|
2022/4/21 [15:03:52]
|
|
|
level_zero_diagnostics_ncr_dmv_system_technical_manual_cpm-80_(bw)_page-60.pdf
|
64,969
|
2022/4/21 [15:03:54]
|
|
|
|
ncr_decision_mate_v_system_technical_manual_msdos_with_index.pdf
|
7,129,464
|
2022/7/13 [21:28:22]
|
System technical manual for MSDOS (page C-2-1 to C-2-168 are missing)
|
|
|
ncr_dmv_circuit_diagrams_(bw).pdf
|
1,855,853
|
2018/10/30 [20:28:08]
|
|
|
|
ncr_dmv_circuit_diagrams_(gray).pdf
|
16,673,116
|
2018/10/30 [20:29:22]
|
|
|
|
ncr_dmv_clock_k803-v001_(ger_gray).pdf
|
11,935,977
|
2018/10/30 [20:30:26]
|
|
|
|
ncr_dmv_clock_k803-v001_(ger_sw).pdf
|
1,228,542
|
2018/10/30 [20:30:54]
|
|
|
|
ncr_dmv_cpm-80_(bw_ocr).pdf
|
9,248,794
|
2018/10/30 [20:31:50]
|
Bedienungsanleitung 3. Auflage, Januar 1984 | Einfuerung in das System; Dokumentation zum CP/M 80
|
|
|
ncr_dmv_gw-basic_(bw_ocr).pdf
|
7,712,320
|
2018/10/30 [20:33:00]
|
Einfuerung in das System; Dokumentation zu GWBasic | Dieses Handbuch, das Sie mit Ihrer GW-BASIC-Diskette halten, besteht aus drei Hauptteilen: MS-BASIC, der MS-DOS-Erweiterung sowie der Beschreibung der GW-BASIC-Erweiterung.Sie haben damit eine vollstaendige Beschreibung der Sprache BASIC in einem Band.
|
|
|
ncr_dmv_hardware_erweiterungen.pdf
|
6,329,907
|
2018/10/30 [20:34:34]
|
|
|
|
ncr_dmv_hardware_erweiterungen_(bw).pdf
|
2,532,890
|
2018/10/30 [20:36:04]
|
|
|
|
ncr_dmv_ms-dos_benutzer_handbuch_(bw_ocr).pdf
|
10,456,622
|
2018/10/30 [20:37:42]
|
MSDOS-2.0 | Sehr geehrter NCR MS-DOS-Benutzer,dieses Buch enthaelt die MS-DOS-Betriebssystem-Diskette und dieDokumentation zur Benutzung der Software. Das Buch besteht aus einer leicht verstaendlichen Beschreibung der Einrichtungen und Funktionen von MS-DOS, waehrend das Programmier-Handbuch das technische Detailwissen fuer den Programmierer vermittelt. Da Sie als Programmierer meist ueber reichende Englisch-Kenntnisse verfuegen, wurde das Programmier-Handbuch in der Originalfassung belassen.
|
|
|
ncr_dmv_ms-dos_programmers_manual_(bw_300).pdf
|
7,629,572
|
2018/10/30 [20:38:18]
|
The Microsoft (R) MS(tm)-DOS Programmer's Reference Manual is a technical reference manual for system programmers. This manual contains a description and examples of all MS-DOS systemcalls and interrupts (Chapter 1). Chapter 2, "MS-DOS DeviceDrivers" contains information on how to install your own devicedrivers on MS-DOS. Chapter 3 through 5 contain technical mation about MS-DOS, including MS-DOS disk allocation (Chapter3), MS-DOS control blocks and work areas (Chapter 4) and EXEfile structure and loading (Chapter 5). Chapter 6 describes specialfeatures, such as the timer interrupt support and I/O controlfunctions. Appendix A provides keyboard code charts.The term " MS-DOS" in this manual refers to MS-DOS versions that are 2.0 or higher.
|
|
|
ncr_dmv_ms-dos_programmers_manual_(gray_300).pdf
|
14,809,437
|
2018/10/30 [20:39:22]
|
|
|
|
ncr_dmv_ms-dos_user_information_(bw).pdf
|
17,542,318
|
2018/10/30 [20:40:00]
|
|
|
|
ncr_dmv_ms-dos_user_information_(gray).pdf
|
43,401,358
|
2018/10/30 [20:41:14]
|
|
|
|
ncr_dmv_ms_macro_assembler_(bw_ocr).pdf
|
3,727,321
|
2018/12/3 [21:07:50]
|
MS(tm)-MACROASSEMBLER Ver.:1.121 | Microsoft's Macro Assembler is a very powerful assembler for 8086-based computers. Macro Assembler incorporates many featuresusually found only in large computer assemblers. Macro assembly, conditional assembly, and a variety of assembler directives provide allthe tools necessary to derive full use and full power from an 8086,8087 or 8088 microprocessor.
|
|
|
ncr_dmv_power_supply.pdf
|
756,450
|
2022/4/28 [06:53:44]
|
|
|
|
ncr_dmv_prospekt_(ger).pdf
|
5,195,961
|
2019/5/13 [15:21:28]
|
|
|
|
ncr_dmv_prospekt_a.jpg
|
2,710,589
|
2019/5/13 [15:11:20]
|
|
|
|
ncr_dmv_prospekt_b.jpg
|
2,782,859
|
2019/5/13 [15:11:20]
|
|
|
|
ncr_dmv_systeminfo_(ger_bw).pdf
|
17,399,910
|
2018/10/30 [21:11:52]
|
|
|
|
ncr_dmv_systeminfo_(ger_gray).pdf
|
31,695,212
|
2018/10/30 [21:14:36]
|
|
|
|
ncr_dmv_system_technical_manual_cpm-80_(bw).pdf
|
15,751,173
|
2018/10/30 [20:42:06]
|
|
|
|
ncr_dmv_system_technical_manual_cpm-80_(bw_150).pdf
|
9,630,742
|
2018/10/30 [20:43:14]
|
In the NCR DECISION MATE V System Technical Manual series, the chapters are arranged in numeric sequence and the appendices in alphabetic sequence: Hardware Chapters 1 and 2, Appendix A; CP/M-80 Chapter 3, Appendix B; MS-DOS Chapter 4, Appendix C; CP/M-86 Chapter 5, Appendix D. The NCR DECISION MATE V System Technical Manuals are designed to provide both hardware and software information: they are intended for designers, system integrators, programmers, and other interested persons who require detailed information on the construction and operation of the NCR DECISION MATE V.
|
|
|
ncr_dmv_system_technical_manual_cpm-86_(bw).pdf
|
22,784,178
|
2018/10/30 [20:44:16]
|
|
|
|
ncr_dmv_system_technical_manual_cpm-86_(gray).pdf
|
34,796,772
|
2018/10/30 [20:45:34]
|
|
|
|
ncr_dmv_system_technical_manual_hardware_(ger_bw_ocr).pdf
|
11,332,929
|
2018/10/30 [20:47:38]
|
As the name says - The HARDWARE -technical manual for the DM-V
|
|
|
ncr_dmv_system_technical_manual_hardware_(ger_gray_ocr_300).pdf
|
86,407,033
|
2022/5/6 [14:35:36]
|
|
